Campaign extension decided! Until June 30, 2023, at the latest. Supporting network construction required in the Wi-Fi 6 era with the 10G, multi-gig, fanless L3 switch 'x330 series' and a corporate 5G router that enables network management.

10G+ multi-gigabit compatible. Achieves high-speed 2.5G/5G connections using existing CAT5e wiring. A fanless design makes it ideal for quiet environments.

The CentreCOM x330 series is a Layer 3 Gigabit Intelligent Switch equipped with 10G multi-gigabit (1000/2.5G/5G/10GBASE-T) ports and SFP/SFP+ slots for uplink, and 1 gigabit ports for downlink. With a fanless design, it is an ideal product for very small networks and environments that require quiet operation, such as hospitals and schools. The 10G multi-gigabit ports enable high-speed networking through 10G connections via metal cables, as well as 2.5G/5G connections using existing CAT5e wiring. It supports standard L3 switch functions by default, and with the application of a premium license, dynamic routing and multicast routing features can be added. *For more details, please refer to the related links or feel free to contact us.

• Routers, Switches, and Hubs

Multi-carrier (SIM-free) 5G/4G LTE communication compatible with dual SIM slots, next-generation VPN access router.

The AT-AR4050S-5G is a next-generation VPN access router that incorporates a 5G communication module compatible with multi-carrier (SIM-free) 5G/4G LTE communication. The SIM card slot and the standard antenna support both 5G and 4G LTE, providing an optimal network environment based on the area and communication conditions. With dual SIM slot support that allows for simultaneous insertion of two SIM cards, it is possible to operate with active standby on mobile communication lines. The AT-AR4050S-5G enables easy network setup in locations where fixed lines are difficult to install or when temporary network construction is needed. *For more details, please refer to the related links or feel free to contact us.*

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• Firewall and intrusion prevention

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.