INTERMOLD2023 Highlights of Our Products (Somax Corporation)

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power and capabilities of the "CPIII" series, it features: ● Automatic lifting and lowering of the cleaning basket ● Flip-up type plus electrode, and more New functions that accommodate diversity! With the addition of new features, the physical burden during mold maintenance is significantly reduced. It enables mold maintenance that is accessible to people of all ages and genders. To everyone aiming for the automation and efficiency of mold cleaning: We will overturn the common notions that "mold maintenance requires skilled techniques" and "it takes time and is difficult." 【Features of the Kuripika Ace Mold Cleaning Machine】 - Automatically cleans molds arranged in a dedicated basket - Cleans multiple mold parts at once - Cleaning solution penetrates every corner of the mold, perfectly removing dirt - No damage to the mold - No organic solvents used

• Other cleaning machines
• Ultrasonic Cleaner

Brightness recovery and yield improvement. With the optical component mold cleaning machine "Cripika Ace OPT," you can perfectly remove dirt from molds for optical components such as light guide plates and lenses!

＼Contactless cleaning!／ The mold cleaning machine for optical components, 'Clipika Ace OPT,' perfectly removes dirt adhered to delicate optical molds without causing any damage. It addresses gas burns and resin stains, ensuring that even nano and micro-level dirt is not missed. 【Conventional maintenance of optical component molds】 ● Performed manually using cotton swabs and other tools ● Requires utmost care as it is prone to scratches ● May not completely remove all dirt ● Concerns about the burden on the body due to the use of organic solvents 【Clipika Ace OPT】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Allows for contactless cleaning 〇 Cleaning solution penetrates every corner of the mold, lifting and removing dirt 〇 Uses a water-based cleaning solution that has low environmental impact and does not contain organic solvents We offer a lineup tailored to the size of the molds. *For details, please refer to the "Lineup."

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

The new water reamer enhances cleaning power with bidirectional circulation!

The rust removal machine "Water Reamer," which automatically handles everything from cleaning the mold temperature control piping to rust prevention, has been newly released with a bidirectional circulation mode! It removes the layers of rust and impurities accumulated in the cooling water, improving cooling efficiency. 【Features】 〇 Increased cleaning power due to bidirectional circulation ← New! 〇 Easy operation that requires no disassembly of the mold; simply connect the mold and this product with a hose 〇 Forms a rust prevention coating simultaneously with rust removal 〇 Adopts an air blow drying system, eliminating the need for water washing or neutralization treatment after rust removal 〇 Does not discharge rust removal liquid due to a completely closed system

• Other physicochemical equipment
• Other cleaning machines

Create cleaning test reports with fully equipped facilities! Would you like to clean molds in the cleaning test room of Somax Co., Ltd.?

Somax Corporation is currently conducting free demonstrations in our "Cleaning Test Room," where customers are invited to visit. 【Well-Equipped Test Room and Analysis Equipment】 In addition to our mold cleaning machine, the Cripica Ace, we offer a range of mold maintenance equipment, including: - Electron microscopes - Optical microscopes - Laser microscopes - X-ray analysis equipment and more, all equipped for analysis! We can conduct test cleaning with large cleaning machines and observe large-sized molds that cannot fit on a desk. The cleaning tests will be handled by experienced staff. Additionally, we will prepare a cleaning test report. You can apply for a free demonstration in the cleaning test room through our website. We also welcome inquiries just to hear more about our services! ▼ Request a free demo here https://www.somax.co.jp/demonstration/form/ For more details, please check our catalog, which is available for free download. Feel free to contact us!

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

Representatives from each area will provide demo units for free anywhere in Japan. Online demos are also available for free!

In response to customer requests such as "I want to try it out!" and "I want to test it in-house!", we are currently offering free demonstrations nationwide where you can try the products you desire! We have prepared three methods for you, so please take this opportunity to experience the exceptional cleaning power with your company's molds! 【1】 Nationwide On-Site Demo A free on-site demonstration where we visit anywhere in Japan with the actual equipment. 【2】 Online Demo A service that provides product introductions and operational explanations via the internet for customers who find it difficult to conduct face-to-face demonstrations. 【3】 Demo in the Cleaning Test Room A demonstration conducted in our "Cleaning Test Room," which includes a measurement and analysis room, where customers can visit our facility. Please feel free to contact us for demonstrations or to request catalogs!

• Plastic Mould
• Resin mold
• Mold Design

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

Announcement of Participation in "CEATEC 2025" [Exhibition Announcement] JAPAN PACK 2025 October 14 (Tuesday) to October 17 (Friday) 10:00 AM to 5:00 PM [Exhibited Products] Eco-friendly, high-performance, low-cost cardboard cooling boxes

[Speaker] Koji Endo, Senior Managing Director and Chief Executive Analyst, SBI Securities Co., Ltd. Economic Research Department [Lecture Topics] 1. Topics related to the automotive industry in 2025 2. Many motor shows worldwide in the second half of the year, with a succession of new car launches 3. Emphasis on the risks of not holding Toyota stock 4. Upward revisions in interim financial results (Toyota, Honda, SUBARU, Suzuki, Toyota group parts, etc.) 5. The U.S. economy and new car demand may surprisingly remain strong 6. Reenactment of partnership discussions (Honda, Nissan, Mazda, Foxconn, cross-industry, parts) 7. Implementation of Trump's tariffs, additional tariff rate on automobiles from 27.5% to 15% 8. Q&A / Business card exchange *The program may be subject to change based on the latest trends.

[Speaker] Analyst Shugo Arai, Next Generation Infrastructure and Services Office, Strategic Project Team, Mizuho Bank, Ltd. [Key Lecture Content] Nuclear fusion is a next-generation energy technology that has the potential to contribute to both energy and environmental issues. Japan has led research and development under international cooperation and has accumulated high technological capabilities. In recent years, private startups have been advancing in the development competition, raising expectations for early practical application. This lecture will explain the history of nuclear fusion research and development, the latest trends in startups and policies, and the direction of efforts towards industrialization in Japan. [Lecture Items] 1. History of research and development through international cooperation towards the realization of nuclear fusion power generation 2. Trends in diverse research and development by startups aiming for practical application 3. Policy trends overseas and Japan's "Fusion Energy Innovation Strategy" 4. Challenges to practical application and points to watch in the future 5. Challenges and responses towards the industrialization of nuclear fusion energy in Japan 6. Q&A / Business card exchange

Announcement for Nagoya Messe 2025. 【Exhibits】 　Injection Molding 　　Bioplastics 　Rigid Polyurethane Molding 　　Eco-friendly, high-performance, low-cost cardboard cooler boxes 　Micro Pumps