New Release: Custom Clamper (TPS Quick Clamper Series)

When air is supplied, the shaft is unclamped; when it is cut off, the shaft is clamped! Easy layout changes and connection arrangements are possible.

New product in the Quick Clamper series! Custom Clamper. When air is supplied, the shaft is unclamped, and when the air is cut off, the shaft is clamped. With the addition of linear bushes at both ends, it can withstand thrust loads. Using the custom clamper in alignment units makes it easy to change the arrangement pattern of the elements. It can be used for various applications such as height adjustment, positioning, Z-axis drop prevention, jigs, and robot hands. 【Examples of Use】 ■ Workpiece gripping ■ Height adjustment ■ Positioning ■ Z-axis drop prevention ■ Robot hand ■ Intermediate stop of cylinders ■ Fixed holding of clamp cylinders ■ Retention of chucking force ■ Drop prevention for pick & place ■ Pressure assistance for air guns *For more details, please refer to the PDF document or feel free to contact us.

• Coaxial Connectors

One-touch secure locking! Ideal for a wide range of embedded applications! Compact and requires no power or air!

The "Quick Clamper" series features a locking mechanism that allows for linear movement clamping and unclamping with a single touch, without exerting force. Once you let go, the fixation is complete. It enables "fixation," "safety enhancement," and "fall prevention" with stable holding power. 【Features】 - No force required; consistent holding power with simple operation - No workpiece drop even during power outages - Compact design makes it suitable for embedded applications - Operational guarantee of 500,000 cycles (inner unit: 100,000 cycles), with minimal wear - No electrical or air power needed during fixation (mechanical mechanism employed) *For more details, please refer to the PDF document or feel free to contact us.

• Coaxial Connectors

Fix both the thrust direction and the rotation direction!

A unit that combines a quick clamping element and a ball spline LFH-X, fixing both thrust and rotational directions. It can be easily unclamped by gripping the lever at the bottom of the unit. It can be used for various applications, such as securing transport workpieces. ■ Example of use for fixing automobile doors The door is grasped and fixed with a U-shaped part attached to the back. By using two units on one axis, it can accommodate doors of various shapes and sizes. ■ Comparison with conventional products <Conventional products> - Can only clamp at limited positions - Play occurs in the clamping direction <Flexible gripper> - Can clamp at any position → accommodates various workpieces - No play in the clamping direction, allowing for precise positioning - Integrates thrust/rotation fixation, enabling weight reduction *For more details, please refer to the catalog or feel free to contact us.

• Coaxial Connectors

Safe, easy, and smart! An excellent locking mechanism that can be integrated into pipes.

Introducing the 'Inner Unit,' a type of quick clamping device from the Fixed Revolution Quick Clamper series that can be integrated within pipes. This 2-way type clamps in both directions, making it ideal for pipe extension applications. With a holding force of 600N, it offers high reliability even in smart applications. Pulling the pull rod releases the clamp, and simply letting go allows it to clamp again. Additionally, it can be remotely operated by pulling the pull rod with a wire or similar means. 【Features】 ■ High holding force: 600N, providing peace of mind with high reliability ■ Easy, safe, and secure: Pulling the pull rod releases the clamp, and letting go allows it to clamp ■ Remote operation possible: Can be remotely operated by pulling the pull rod with a wire or similar means ■ Versatile: Can be integrated within pipes, allowing for weight reduction and application in various uses *For more details, please refer to the PDF document or feel free to contact us.

• Coaxial Connectors

Easy clamping/unclamping with remote operation via lever!

Fixed revolution! The "Quick Clamper" now features a new 'Lever Unit' that allows clamping and unclamping with lever operation. With guide bushes at both ends of the case, it has minimal tilt and functions as a simple bearing. The lever is equipped with a pre-drilled hole for wire attachment, enabling remote operation via wire. Linear bushes of type SH can be placed at both ends in the axial direction. 【Features】 ■ Minimal shaft tilt and smooth movement ■ Remote operation possible ■ Easy combination with linear bushes ■ Surface treatment with durability and excellent lubrication ■ Applicable shaft diameter: φ8/16 *For more details, please refer to the PDF document or feel free to contact us.

• Coaxial Connectors

Unlock by pinching with your fingers and release to secure. A one-touch clamp that can be used 500,000 times.

The "Quick Clamper" series is a one-touch clamping device that releases the lock by pinching with your fingers and secures it when you let go. It effectively resolves issues associated with traditional screw-tightening clamps, such as over-tightening and inconsistencies in clamping force. It can be utilized in various settings, including industrial, medical and caregiving, and household applications. Despite its compact size, it offers a high holding force of 450N for φ16, and it is designed with safety and energy-saving features, such as fall prevention and no need for power. **Features of the Quick Clamper:** - **No effort required:** Clamping and unclamping can be done with one hand simply by releasing your grip. - **Easy and reliable:** Only a minimal amount of finger strength is needed to unclamp, while the holding force is large and consistent. - **Safe and secure design:** The workpiece will not fall even if you let go or in the event of a power outage. - **Compact:** High holding force in a compact design, making it easy to integrate with limitless applications. - **Durability:** Guaranteed for 500,000 operations with minimal wear. - **Energy-efficient:** No power required for clamping, as it uses a mechanical mechanism. *For more details, please refer to the PDF document or feel free to contact us.* *Samples are available for free loan! Please apply through "Contact Us."*

• Coaxial Connectors

One-touch fixation [Quick Clamper] × "Narai Unit" achieves standardization of jigs!

The "Quick Clamper" is a locking mechanism that allows for linear movement clamping and unclamping to be performed effortlessly with a single touch. It does not require power during fixation and can maintain a high holding force consistently while locking. It is easy for anyone to handle, and there is no variation in the tightening force. "Fixation, improved safety, and fall prevention" can be achieved simultaneously. 【What is the guiding mechanism?】 By aligning elements using the Quick Clamper with the workpiece, it enables the support, gripping, and transportation of various types of workpieces. *For more details, please refer to the PDF document or feel free to contact us.*

• Coaxial Connectors

The introduction of fixed mechanisms that can be remotely operated by various control devices such as PLCs. Ideal for integration into machinery, with limitless applications!

Fixed revolution! The 'Air Unit,' equipped with an air release mechanism, has newly joined the "Quick Clamper" series. With the air ON, it unclamps easily, making control straightforward. There are two types of clamping methods available: 1-way (single direction) and 2-way (bi-directional). Even if the air supply is lost due to disconnection of the air tube or a power outage, it clamps instantly for safety. It prevents falls and protects both the workpiece and the operator. 【Features】 ■ Remote operation available ■ Compatible shaft diameters: φ8, φ16 ■ Safe and secure design for emergencies ■ Can be retrofitted to air cylinders ■ Manual release available ■ Energy-saving *For more details, please refer to the PDF document or feel free to contact us. *The CKD manufactured exclusive cylinder for optional items is only available for sale domestically.

• Coaxial Connectors

A work support unit with height adjustment that can be done continuously!

A work support unit with infinitely adjustable height. It can be attached to a magnetic stand, allowing you to freely change the height by gripping the plate. With the adjustment screw, aligning the workpiece parallel is also easy. By using multiple units, it is possible to stably support workpieces of various shapes. When combined with a vacuum suction stand, it can also be used on granite or ceramic plates. *For more details, please refer to the catalog or feel free to contact us.

• Coaxial Connectors

This is a demo machine that allows you to experience the quick clamping mechanism. If the workpiece is within the specified range, suction demonstrations can be performed with your workpiece as well.

"Adaptable to various types of work with the alignment unit!" ■ What is the alignment unit? It is a mechanism that arranges multiple quick clampers both vertically and horizontally, allowing the shaft to be fixed according to the contours of the workpiece, enabling support, gripping, and transportation of various types of work without the need to change chucks or jigs. The alignment unit of this demonstration machine is manual, allowing for flexible testing of how the elements contact the customer's workpiece and the degree of suction. With a balancer attached, it can lift the workpiece with minimal effort. It is possible to identify challenges for implementation. You can experience the demonstration machine at our Keihin Sales Office (Tamagawa, Ota-ku, Tokyo). It will also be exhibited at the Mechanical Elements Technology Exhibition (M-Tech) held in Tokyo, Osaka, and Nagoya. If you would like a demonstration, please contact us.

• Coaxial Connectors

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.