New Product" Automotive Current Fuse "JAJ Type N Series" "JAK Type N Series

Micro fuses suitable for circuits of in-vehicle components!

The "KAB Type N Series 720" is a high-reliability series developed for circuit protection against overcurrent for important onboard electronic devices related to the basic performance of vehicles, devices where circuit protection failures can lead to significant losses, and devices that may impact human life. It also complies with AEC-Q200, a standard widely adopted for automotive electronic components. It is a completely lead-free product designed with environmental considerations. 【Features】 ■ Minimal variation in melting characteristics and excellent quick-breaking performance ■ Surface temperature rise during rated current operation is below 75°C, minimizing impact on the surroundings ■ Available in two ultra-small sizes: 1608 (1.6×0.8×0.45mm) and 2012 (2.0×1.25×0.5mm) ■ Suitable for high-density mounting with dimensional accuracy and symmetrical electrode structure, allowing for automatic mounting and self-alignment with chip placers ■ Solder heat resistance sufficiently meets 260°C for 10 seconds, compatible with both reflow and immersion processes, etc. *For more details, please download the PDF or feel free to contact us.

• fuse
• Other electronic parts

Micro fuses suitable for the circuits of in-vehicle components!

The "KAB Type M Series 720" is a high-reliability series developed for circuit protection against overcurrent in general automotive electrical equipment and industrial devices intended for use inside vehicles, such as car navigation systems and in-vehicle cameras. It also complies with AEC-Q200, which is widely adopted as a standard for automotive electronic components. It is a completely lead-free product designed with environmental considerations in mind. 【Features】 - Minimal variation in melting characteristics and excellent fast-blowing capability - Surface temperature rise during rated current operation is below 75°C, minimizing impact on the surroundings - Available in two ultra-small sizes: 1608 (1.6×0.8×0.45mm) and 2012 (2.0×1.25×0.5mm) - Suitable for high-density mounting with dimensional accuracy and symmetrical electrode structure, allowing for automatic mounting and self-alignment using chip placers - Solder heat resistance meets and exceeds 260°C for 10 seconds, compatible with both reflow and immersion processes, among others *For more details, please download the PDF or feel free to contact us.

• fuse
• Other electronic parts

This is an automotive micro fuse suitable for electronic devices such as vehicle control systems!

The "JAG Type N Series" has been developed for circuit protection against overcurrent in automotive and industrial equipment. It also complies with the widely adopted ACE-Q200 standard for automotive electronic components. The fuse element uses wire material, resulting in a compact product with improved pulse resistance. By being completely lead-free, it features an environmentally friendly design. 【Features】 - The use of wire material in the fuse element provides exceptional pulse resistance. - The surface temperature rise during rated current operation is kept below 75°C, minimizing impact on the surrounding environment. - The solder heat resistance meets the requirements of 260°C for 10 seconds, making it suitable for both reflow and immersion soldering. - It is compact, measuring 3216 (3.2×1.6×1.4mm). - The dimensional accuracy and symmetrical electrode structure are suitable for high-density mounting, allowing for "self-alignment." *For more details, please download the PDF or feel free to contact us.

• fuse
• Other electronic parts

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.