Thank you for visiting Intermold 2023.

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power and capabilities of the "CPIII" series, it features: ● Automatic lifting and lowering of the cleaning basket ● Flip-up type plus electrode, and more New functions that accommodate diversity! With the addition of new features, the physical burden during mold maintenance is significantly reduced. It enables mold maintenance that is accessible to people of all ages and genders. To everyone aiming for the automation and efficiency of mold cleaning: We will overturn the common notions that "mold maintenance requires skilled techniques" and "it takes time and is difficult." 【Features of the Kuripika Ace Mold Cleaning Machine】 - Automatically cleans molds arranged in a dedicated basket - Cleans multiple mold parts at once - Cleaning solution penetrates every corner of the mold, perfectly removing dirt - No damage to the mold - No organic solvents used

• Other cleaning machines
• Ultrasonic Cleaner

Brightness recovery and yield improvement. With the optical component mold cleaning machine "Cripika Ace OPT," you can perfectly remove dirt from molds for optical components such as light guide plates and lenses!

＼Contactless cleaning!／ The mold cleaning machine for optical components, 'Clipika Ace OPT,' perfectly removes dirt adhered to delicate optical molds without causing any damage. It addresses gas burns and resin stains, ensuring that even nano and micro-level dirt is not missed. 【Conventional maintenance of optical component molds】 ● Performed manually using cotton swabs and other tools ● Requires utmost care as it is prone to scratches ● May not completely remove all dirt ● Concerns about the burden on the body due to the use of organic solvents 【Clipika Ace OPT】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Allows for contactless cleaning 〇 Cleaning solution penetrates every corner of the mold, lifting and removing dirt 〇 Uses a water-based cleaning solution that has low environmental impact and does not contain organic solvents We offer a lineup tailored to the size of the molds. *For details, please refer to the "Lineup."

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

The new water reamer enhances cleaning power with bidirectional circulation!

The rust removal machine "Water Reamer," which automatically handles everything from cleaning the mold temperature control piping to rust prevention, has been newly released with a bidirectional circulation mode! It removes the layers of rust and impurities accumulated in the cooling water, improving cooling efficiency. 【Features】 〇 Increased cleaning power due to bidirectional circulation ← New! 〇 Easy operation that requires no disassembly of the mold; simply connect the mold and this product with a hose 〇 Forms a rust prevention coating simultaneously with rust removal 〇 Adopts an air blow drying system, eliminating the need for water washing or neutralization treatment after rust removal 〇 Does not discharge rust removal liquid due to a completely closed system

• Other physicochemical equipment
• Other cleaning machines

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

【Seminar Overview】 The construction industry faces many challenges, including labor shortages, regulations on working hours, and the need for operational efficiency. Additionally, the aging workforce presents significant issues, and there is a concerning trend of high turnover rates among younger employees who are supposed to carry on the skills and knowledge. In this seminar, we will discuss the causes of turnover based on case studies and explain key points on how advancing IT can help reduce turnover rates.

Date: October 7, 2025 (Tuesday) to October 10, 2025 (Friday) - 4 days Opening Hours: 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Halls 4-8 Booth Number: 7-126 Exhibited Machines: ■ Quantitative Molding → Deep Drawing Automatic Feeding Line VEMAG (Germany) Robot500 ... Quantitative Filling Machine VEMAG (Germany) ASV811 ... Cutting Device FANUC (Japan) Parallel Link Robot SEALPAC (Germany) RE23 ... Deep Drawing Vacuum Gas Replacement Packaging Machine FANUC (Japan) Collaborative Robot SMC (Japan) Hand ■ SEALPAC (Germany) Amax ... Fully Automatic Gas Replacement Tray Sealer * Digital Printing Top Film Videojet (Japan) UV Laser Marker Nikka Densok (Japan) Seal Leak Testing Device M-flex ... Semi-Automatic Rotating Gas Replacement Tray Sealer ■ Supervac (Austria) GK169B ... Belt-Type Chamber Machine GK402B ... Belt-Type Chamber Machine ■ Packaging Materials Hotel Pantry * Please note that the exhibited machines may change without prior notice.

【Exhibition Information】 Exhibition Name: Food Processing Technology Expo 2025 Date and Time: November 14, 2025 (Friday) 10:30 AM - 4:30 PM *Free entry and exit, pre-registration required Location: Osaka Industry Creation Center - We will showcase technical products using the factory deodorant "Deofure." - We will display the tofu defoamer "Tofu Up." - Other aromatic technical products will also be exhibited. *For more details, please refer to the materials.

Techne Measurement Co., Ltd. will exhibit at the "Kyushu Semiconductor Industry Exhibition" held at Marine Messe Fukuoka, Halls A and B, on October 8 (Wednesday) and 9 (Thursday), 2025. This time, we will showcase dew point meters, moisture meters, oxygen concentration meters, anemometers, temperature and humidity meters, and temperature and humidity/dew point calibrators for the semiconductor industry. Please be sure to visit the Techne Measurement booth. 　＿＿＿　　　　　　　＿＿＿ 　＼ ┌┴──────┴┐ ／ 　／ │Visitor Gifts│ ＼ 　￣ └────────┘ ￣ 　　 We are giving away the very popular 330ml spherical bottle of cute "Moisture Water"! Visitors who exchange business cards will receive water in the shape of our official character "Moisture" as a gift♪ It's a very cute bottle, so be sure to get one! Please be sure to visit the Techne Measurement booth.