Durability: Explanation of TBW and Workload

A 2.5-inch SSD equipped with 3D NAND designed for industrial use, capable of supporting large capacities up to 7.6TB, making it an ideal product for a wide range of applications.

Silicon Power 2.5" SATA SSD 【SSD3F0 Series】 • Equipped with high-quality 112-layer 3D TLC NAND flash technology • Supports TRIM command to erase unused data and maintain optimal performance • Achieves superior sustained performance through dynamic SLC caching algorithm • Activates read-only mode when the SSD reaches its write cycle limit to prevent data corruption • Improved product lifespan • Complete protection design with high-reliability industrial-grade integrated active PMU and OVP, OCP, surge removal, and short-circuit protection • External DRAM support for optimal sustained read and write performance • Power shield firmware architecture ensures resistance to power outages • AES256 encryption and TCG Opal 2.0 compliance (available upon request) • Compatible with SP SMART Toolbox Customization specifications are available, so please consult with us. For more details, please contact us through the related link.

• Memory

The DRAMless, BiCS5 NAND equipped PCIe interface SSD MEA3K0E allows for high-speed access and is ideal for industrial applications.

Silicon Power M.2 2242 SSD 【MEA3K0 E Series】 • Equipped with high-quality 3D TLC NAND (BiCS5) flash technology • Compliant with industrial standard NVMe 1.3 and PCIe Gen3x4 • Global wear leveling and detection of initial defective blocks • Supports TRIM, NCQ, DEVSLP commands, and PCIe Gen1.0/2.0/3.0 interfaces • Improved product lifespan • Compatible with SMART Toolbox Customization specifications are available, so please consult with us. For more details, please contact us via the related link.

• Memory

The DRAMless BiCS5 equipped SATAIII interface SSD MDA3K0E supports large capacities up to 1TB, making it ideal for industrial applications.

Silicon Power M.2 2242 SSD [MDA3K0 E Series] • Equipped with high-quality 3D TLC NAND flash (BiCS5) technology • Global wear leveling and detection of initial defective blocks • Supports TRIM, NCQ, DEVSLP commands, and ATA security features • Improved product lifespan • Compatible with SMART Toolbox Customization specifications are available, so please consult with us. For more details, please contact us via the related link.

• Memory

High-performance BiCS5 NAND equipped, M.2 2280 SATA interface SSD for industrial MDC3K0E series.

Silicon Power 2280 SSD [MDC3K0E Series] Equipped with high-quality 3D TLC NAND flash technology • Global wear leveling and detection of initial defective blocks • Supports TRIM, NCQ, DEVSLP commands, and ATA security features • Ensures power failure resistance with power shield firmware architecture • Garbage collection and TRIM dataset management commands • Average P/E cycles through global wear leveling algorithm Customization specifications are available, so please consult with us. For more details, please contact us via the related link.

• Memory

High-performance BiCS5 NAND equipped, M.2 2280 NVMe SSD for industrial use, MEC3K0E series.

Silicon Power 2280 SSD [MEC3K0E Series] • Equipped with high-durability 3D TLC NAND flash (BiCS5) • Adopts the next-generation data transfer protocol NVMe 1.3, supporting PCIe Gen ×4 channel data transfer. • Read speeds and write speeds reach up to 2,600MB/s and 2,000MB/s, respectively. • Features TRIM, NCQ, and S.M.A.R.T. functions Customization specifications are available, so please consult us. For more details, please contact us via the related link.

• Memory

MDA350 series featuring high reliability and high performance M.2 2242 SSD with 3D NAND, specialized for industrial/embedded applications.

Silicon Power M.2 2242 SSD [MDA350S Series] • Equipped with high-quality 3D TLC NAND flash technology • Features TRIM, NCQ, DEVSLP, and S.M.A.R.T. • Improved product lifespan • Complete protection design with high-reliability industrial-grade integrated active PMU and OVP, OCP, surge removal, and short-circuit protection • Built-in DRAM for optimized sustained performance • Power shield FW architecture ensures power failure resistance • Read speeds and write speeds reach up to 450MB/s and 550MB/s, respectively Customization specifications are available, so please consult with us For more details, please contact us via the related link.

• Memory

The MEC3H0S series is a PCIe 4.0 NVMe SSD for industrial rugged edge computing by Silicon Power.

Silicon Power M.2 2280 NVMe SSD [MEC3H0S Series] [MEC3H0E Series] The Silicon Power MEC3H0S Series achieves stable operation over a wide temperature range from -40°C to 85°C. It also adopts a high-level 12-layer PCB substrate and operates without moving parts, enabling more stable performance. It is an ideal product for extreme high and low-temperature environments as well as mobile environments. ◆ Achieves High-Speed Performance [MEC3H0S Series] Sequential Read: 7,200MB/s Sequential Write: 6,500MB/s [MEC3H0E Series] Sequential Read: 4,700MB/s Sequential Write: 3,800MB/s ◆ Supports Multiple Technologies Supports global wear leveling, ECC error correction, S.M.A.R.T. features, and Trim commands. Customization specifications are available, so please consult with us. For more details, please contact us through the related links.

• Memory

The Silicon Power M.2 2280 SSD MEC3F0 series for industrial use is ideal for applications such as high-quality image processing, where high performance is sustained.

Silicon Power M.2 2280 SSD 【 MEC3F0 Series】 • Equipped with high-quality 3D TLC NAND flash technology • Strict quality control and guarantee • Sustained processing capability with writing performance of over 1GB/s • Ideal for continuous writing applications such as image processing • Advanced thermal throttling management • S.M.A.R.T. compatible For more details, please contact us via the related link.

• Memory

M.2 2280 NVMe SSD Industrial MEC350 Series (Equipped with 3D TLC NAND) with Excellent Durability and Reliable Performance

Silicon Power 2280 SSD [MEC350 Series] • Equipped with high-durability 3D TLC NAND flash • Adopts PCI Express Gen3×4 interface and complies with NVMe 1.3 standard • Features TRIM, NCQ, and S.M.A.R.T. functions • Complete protection design with high-reliability industrial-grade integrated active PMU and OVP, OCP, surge removal, and short-circuit protection • Optimized sustained performance with built-in DRAM (S Series) • Ensures power interruption resistance with power shield FW architecture Customization specifications are available, so please consult with us. For more details, please contact us via the related link.

• Memory

Achieving high reliability, the 3D NAND-equipped SATA SSD solution MSA3K0E series is ideal for those who prioritize cost performance.

Silicon Power mSATA SSD 【MSA3K0E Series】 • Equipped with high-quality 3D TLC NAND flash technology • Global wear leveling and detection of initial defective blocks • Supports TRIM, NCQ, DEVSLP commands and ATA security features • Complete protection design with high-reliability industrial-grade integrated active PMU, OVP, OCP, surge removal, and short-circuit protection • Power Shield FW architecture ensures resistance to power interruptions • Compatible with SP SMART Toolbox • Supports SP SMART Embedded and SMART IoT services Customization specifications are available, so please consult with us. For more details, please contact us through the related links.

• Memory

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

We will be exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises" from December 16 (Tuesday) to 18 (Thursday), 2025. Please feel free to stop by our booth. We look forward to meeting everyone.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

Would you like to have that product certified as "Accredited calibration"? Our company conducts calibration of pressure category "leak gauges" as a registered business under the Measurement Law Calibration Business Registration System (JCSS). Additionally, we are accredited by the Japan Accreditation Board (JAB) as a calibration organization compliant with the international standard ISO/IEC 17025, and we perform calibration of "flow rate," issuing calibration certificates with symbols. Fukuda is an accredited calibration organization compliant with international MRA.