The catalog has been updated. Flat Plate 2-Axis Beveling Machine VXW-7 Series.

It is used for a wide range of structures, from buildings and bridges to ships. Long materials with a width of 2 meters, such as iron and stainless steel, can also be processed quickly in just 19 minutes!

Processing time: Approximately 19 minutes! This is the processing time for a flat steel plate with a thickness of 25mm and a length of 2,000mm, beveled at a 45-degree angle using the VXW-2000-5. *The time for input and setting the processed material is not included. We want not only users in the construction and building industry who use columns, H-beams, and flat steel materials to know this, but also various other people! The beveling machine from Sinks Co., Ltd. can process materials more quickly and powerfully than you might expect. It has been adopted in many industries where the welding strength and adhesion of steel materials are increasingly required, such as buildings, bridges, and ships. The operation system based on images allows for easy input. It comes standard with 15 processing patterns and can accommodate various types of welding. Additionally, by using optional cutters, processing of stainless steel plates can also be performed. 【What is beveling?】 Beveling refers to the groove-like recess created at the weld joint before welding steel materials (iron), stainless steel, etc. By performing beveling, it helps to suppress deformation of the base material, improves the melting of the base materials during welding, increases adhesion, and strengthens welding strength. Moreover, welding after beveling results in a cleaner appearance after the work is completed.

• Welding Machine

A flat plate beveling machine capable of processing "high-tensile steel" and "wear-resistant steel." By reviewing the movable range of the lower shaft, the upper L-shaped processing has become twice as fast as conventional machines.

The 2021 model change of the flat plate processing machine VXW has transitioned from model 5 to model 7, and it is now possible to incorporate an optional chip conveyor. It can be installed without any pit construction. The processing plate thickness ranges from a minimum of 6mm to a maximum of 80mm. By expanding the movable range of the lower axis from -60 degrees to +35 degrees, simultaneous processing on two axes from 0° to +35° is now possible, allowing for upper L-shaped processing at twice the speed of previous models. To facilitate efficient workpiece setup, a free-bearing table is standard equipment, and the positioning of the material hold-down cylinder piping and rope switches has also been modified. Improvements to the cutting tips and a review of cutting conditions have made it possible to process "high-tensile steel" and "wear-resistant steel." The actual machine can be viewed at our company’s open house from June 30 to July 1, and at the International Welding Show held at Tokyo Big Sight from July 13 to 16.

• Welding Machine

Support for the efficiency and quality improvement of opening and finishing operations! Simultaneous dual-axis upper and lower surface processing unit with a simplified operating system.

The "VXW Series" features a simultaneous two-axis upper and lower machining unit and a simplified operating system that supports the efficiency and quality improvement of bevel machining tasks. [Features] - The bevel angle can be quickly and accurately changed for both the upper and lower axes. - The automatic cutting speed function calculates the cutting area based on input, allowing for machining at the optimal feed rate. *Speed can be adjusted via a dial with the override function. - The material is securely clamped with a thrust of 2 tons per unit, reducing vibration and misalignment, which extends the cutter's lifespan. - Operation is easy and intuitive with a large LCD touchscreen. - Optional specifications allow for the machining of stainless steel materials. - The optional front-and-rear movable ruler (two-stage and three-stage) enables more secure clamping of small materials. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

SPACECOOL Inc. is pleased to announce that it has been selected as one of the eight finalists in The Liveability Challenge 2026, hosted by the Temasek Foundation and operated by Eco-Business. The Liveability Challenge (TLC) is a global initiative that evaluates innovative solutions to urgent sustainability challenges in urban tropical regions. This year, under the themes of "Decarbonisation" and "Cool Earth," there were over 1,500 submissions from more than 100 countries, the highest number to date. Our company was the only Japanese firm selected as a finalist and received recognition in the Cool Earth category, which focuses on addressing extreme weather events related to climate change. We will present at the Grand Final, which will be held on May 20, 2026, at the Marina Bay Sands Expo and Convention Centre in Singapore, where we will participate in the final pitch.