"Pack Test Phenol" has been renewed for easier use!

Anyone can easily measure water quality anywhere!

The "Pack Test® Standard Type" is a very simple water quality testing device. It contains a single-use measuring reagent sealed in a polyethylene tube with a diameter of 1 cm and a length of 7 cm. By sucking the water to be tested into the tube, the measuring reagent reacts with the measurement component and develops color. It is a simple operation to compare the developed color with the attached standard color to determine the concentration.

• Water quality testing

Handheld single-parameter water quality meter

The "Digital Pack Test®" is a handheld single-parameter water quality meter. There are a total of 38 models (including ammonium, nitrate, residual chlorine, cyanide, etc.). The water sample (1.5ml) that has been colored using a pack test is transferred to a dedicated cup for measurement, and the measurement results are displayed as concentration (mg/L). 【Features】 ■ Handheld type ■ Compact and lightweight, suitable for field measurements ■ Easy operation with pre-entered calibration curve ■ Data recording automatically saves up to 50 entries ■ Water sample volume: 1.5ml

• Other measurement, recording and measuring instruments
• Water quality testing

Equipped with calibration curves compatible with measurement reagents such as pack tests! Lightweight multiparameter water quality meter.

The "Digital Pack Test Multi SP" is a portable multi-parameter water quality meter equipped with the functions of a visible spectrophotometer. List of measurement items https://packtest.jp/dpm-mtsp-item It can perform concentration measurement, absorbance measurement, spectral measurement, and time scan, allowing for parallel concentration measurement of up to 4 samples and 4 parameters. Additionally, the calibration curve is pre-entered and the touch panel makes operation easy. The latest calibration curve data can be downloaded from the website. 【Features】 ■ Lightweight and portable ■ Easy operation ■ Sample volume 1.5mL ■ Sample products available ■ In addition to the dedicated cup (1.5mL cell for Digital Pack Test), 10mm cells (rectangular) and semi-micro cells can also be used.

• Water quality testing

Yoshikawa Co., Ltd. Realization Division will exhibit at the 40th Nepcon Japan. ■ Dates: January 21 (Wed) - 23 (Fri), 2025 ■ Venue: Tokyo Big Sight ■ Booth: East Hall 4 E6-19 Clean and Static Control Zone The exhibit will feature a storage shelf for slide-type metal masks. 【Efficient storage with a sliding mechanism】 【Easy to take out even while wearing gloves】 【Customization to meet the needs of individual customers】 We invite you to come and see it. ■ Pre-registration (free) is available here or through related links: https://www.nepconjapan.jp/tokyo/ja-jp/register.html?code=1522511758302164-EUA

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "240well 2D Code Attached Tube" is a product with a 200μl type and a rack lid lock function. It is compatible with liquid nitrogen vapor. It allows for the storage and management of a large number of samples in a small space, making it easier to understand. Additionally, it does not use sealing materials, which improves sealability and allows for safer use. 【Features】 ■ Developed a 2D code attached tube for ultra-micro volumes (200μl) ■ Compatible with liquid nitrogen vapor ■ Adopts a new type of screw cap that does not use O-rings, packing, or gaskets ■ Improved sealability and safer use due to the absence of sealing materials *For more details, please download the PDF or feel free to contact us.