See you AI Japan IPX7 MEMS microphone, IP65 ECM new products

New product: Wideband MEMS microphone 20Hz to 20kHz

A new model has been introduced featuring a MEMS microphone with a minimum footprint of 2.75 mm x 1.85 mm, which specifies a phase tolerance of 20 Hz in the low frequency range, making it ideal for microphone arrays and signal processing. It is user-friendly for beamforming, noise cancellation, and sound source localization. This analog output type has a sensitivity tolerance of ±1 dB and a maximum S/N of 64 dB, covering the entire human audible range from 20 Hz to 20 kHz, suitable not only for multiple uses but also for a wide range of applications. With a thickness of just 0.9 mm to 1.00 mm, it is a new product that can be easily integrated into wearable and portable devices.

• Sensors
• Other electronic parts

Ultra-small noise-canceling ECM with a diameter of 4mm and a thickness of 1.5mm, ideal for headsets and similar applications.

The new minimum model of the CUI noise-canceling (bidirectional) electret condenser microphone has arrived, featuring a diameter of 4mm and a thickness of 1.5mm. This ultra-compact microphone, which has the characteristic of being less sensitive to noise from distant sources, is ideal for communication applications such as headsets.

• Sensors
• Other electronic parts

Minimum size 2.75 x 1.85 x 0.9mm, suitable for microphone arrays with a response range of 20Hz and above, digital type with low power mode.

A new thin type of MEMS microphone with a minimum area of 2.75 x 1.85mm has been introduced, featuring a thickness of 0.9mm. The low-frequency (20Hz~) compatible model is also ideal for microphone arrays such as noise cancellation. In the digital (PDM) type, a new compact model measuring 3.5 x 2.65 x 0.98mm has been released, equipped with a low-power mode for low current consumption.

• Sensors
• Other electronic parts

Ideal MEMS microphones for various portable electronic devices.

The CUI CMM series, boasting improved audio quality, performance, and high reliability, features a very compact housing with a low-profile footprint of 2.75 x 1.85 x 0.95 mm. This MEMS microphone is compatible with reflow soldering, providing designers with additional flexibility in applications requiring surface mounting. It is ideal for voice recording and voice capture in smartphones, tablets, smart home devices, and wearables. CUI's MEMS microphones are omnidirectional and offer analog or digital pulse density modulation (PDM) output with top or bottom port positions. Each model in the CMM series comes in circular or rectangular form factors, with sensitivity ratings ranging from -44 dB to -26 dB and signal-to-noise ratios from 57 dBA to 65 dBA. This MEMS microphone also provides reduced vibration sensitivity, a low current of at least 80 microamperes (µA), and a wide operating temperature range from -40°C to +105°C.

• Other electronic parts

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.

Features: ● Equipped with Intel Processor N150 / Intel Core 3 Processor N355 ● DDR5 4800MHz SODIMM ×1 (supports up to 16GB) (sold separately) ● HDMI 1.4 ×1, eDP 1.4b / LVDS ×1 ● Intel Ethernet Controller I226 (2.5GbE RJ-45 ×1), Realtek RTL8111H (1GbE RJ-45 ×1) ● Full-size mSATA / mPCIe ×1, M.2 2230 E-Key ×1 ● USB 3.2 Gen2[x1] ×2, USB 2.0 ×4 ● RS-232/422/485 ×2, RS-232 ×2 ● TPM 2.0, SATA 6Gb/s ×1, 4-bit GPIO, SMBus / I2C ×1 ● Fan-equipped heat sink available separately PICO-ASL4-FAN01: Heat sink with fan PICO-ASL4-HSK01: Heat sink PICO-ASL4-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure) * This is a model without an operating system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.