We will exhibit at the 45th 2023 Tohoku Apparel Industry Equipment Exhibition.

The unique SNF technology has dramatically reduced the impact of external noise.

The "APA-6900" and "APA-6900W" are conveyor-type metal detectors for detecting metal pieces. The latest APA-6900 series is less susceptible to noise from electromagnetic waves and other sources, allowing for flexible installation locations. Simply placing sewn products on the conveyor belt allows for detection of broken needles, causing the belt to stop, making it easy for anyone to operate the detector. It can detect not only single items but also bundled or packaged products, making it efficient. The detection area is tunnel-shaped, resulting in minimal differences in detection sensitivity based on thickness, and it can detect broken needles that have passed through the needle hole of a sewing needle. 【Features】 ■ Belt speed of 39 m/min for more efficient detection work (common for 50/60Hz) ■ Control unit supports three languages: Japanese, English, and Chinese ■ Reliable product management with detection records via USB output ■ The APA-6900W significantly reduces sensitivity differences based on needle orientation due to its V-shaped detection area *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Detection and inspection of iron needles, nails, and broken pieces mixed in various fiber products and industrial products!

The "SK-1200III" is a metal detector and inspection device that allows for speedy inspection with a wide detection width. It is a safety needle inspection device. It can detect and inspect metal needles, nails, and broken pieces that may be mixed into various textile products and industrial products. When a needle or metal piece is detected, it alerts you with four lamps and a buzzer. 【Features】 - Speedy inspection with a wide detection width of 14X55cm - Simple operation with standby ready at the push of a switch - Alerts you with four lamps and a buzzer when a needle or metal piece is detected *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

For the inspection of leftover needles in apparel products! Equipped with SAS circuitry for stable operation even when fashion accessories are attached.

The "APA-3000" is a metal detector and inspection device that demonstrates its power in the inspection of apparel products. It adopts a new circuit method (SAS circuit) that ensures stable operation even when fashion accessories such as zippers, hooks, and buttons are attached, thereby improving the efficiency of inspection work. The inspection sensitivity can be adjusted according to the size, type, and quantity of fashion accessories, making it highly effective for inspecting apparel products such as women's and men's clothing. 【Features】 ■ Adopts SAS circuit ■ Improves efficiency of inspection work ■ Inspection sensitivity can be adjusted according to the size, type, and quantity of fashion accessories *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

A space-saving type that allows you to freely choose the placement! Enables efficient inspection and testing.

The "SK-6" is a space-saving type of metal detector and inspection device. It is lightweight and compact, making it a perfect fit for storefronts. Despite its small size, it inherits the high performance and reliability of the SK-1200III. The detection area is equipped across the full width of the compact body, allowing for efficient inspection and examination. It is suitable for relatively small items such as ties, stockings, kimonos, obi, and traditional Japanese clothing accessories. 【Features】 ■ Lightweight ■ Compact size that doesn't take up much space ■ High sensitivity despite its small size ■ Allows for efficient inspection and examination *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Highly sensitive detection of tiny iron particles! Minimal impact from surrounding conditions such as vibrations and power noise.

The "SK-2200" is a super high-sensitivity metal detector designed for wide inspection items. Thanks to new technology, it is minimally affected by surrounding conditions such as vibrations and power noise, allowing for stable continuous use. With improved sensitivity on the electrode surface, it is a high-performance device capable of detecting extremely small metal fragments with super high sensitivity. 【Features】 ■ Super high-sensitivity type for wide inspection items ■ Minimal impact from surrounding conditions such as vibrations and power noise ■ Allows for stable continuous use ■ Capable of detecting extremely small metal fragments with super high sensitivity *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Automatically detectable online! For detecting iron fragments mixed in food, packaged products, and pharmaceuticals.

The "SK-12TR" is an online automatic metal detector and inspection device. In addition to standard models with detection widths ranging from 0.5m to 4.0m (in 0.5m increments), we can also produce custom lengths. It comes standard with a voltage-free contact output for line control. Multi-channel type probes are also available as an option. 【Features】 ■ Capable of automatic detection online ■ Custom lengths for detection widths can be produced ■ Standard equipped with voltage-free contact output for line control ■ Multi-channel type probes available as an option *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Strong against external noise, can be used on tatami and wooden floors! Simple design and lightweight.

"Hari-Ken" is a slim-type metal detector. With its lightweight and slim simple design, it fits perfectly anywhere without being limited to specific locations. The sensitivity can be switched between "Normal" and "Powerful" with a single touch. It is resistant to external noise and can be used on tatami mats and wooden floors. 【Features】 ■ Lightweight and slim ■ Simple design ■ Suitable for any location ■ Sensitivity can be switched between "Normal" and "Powerful" with a single touch ■ Resistant to external noise *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Dangerous Needle Needle Watcher

A handy type that is convenient for avoiding metal button detection and partial detection! The 'TY-30' is a metal detector that allows for efficient detection with a wide and spot range switch. It is suitable for partial detection of needles, broken needles, and metal pieces mixed into sewn products, as well as detecting needles, nails, and other metal pieces mixed into pharmaceuticals and packaged products. Additionally, the 'TY-20Z' is also available. 【Features】 ■ Handy type ■ Convenient for avoiding metal button detection and partial detection ■ The TY-30 enables efficient detection with a wide and spot range switch *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

[Instructor] Mr. Tsuyoshi Igarashi, CEO of Leaders Creative Lab Inc. [Key Lecture Content] "Each individual has potential, yet the team fails to achieve results." "Members only do what they are told; they lack proposal skills." "I am struggling with what to do as a leader." "I want to increase the engagement of both members and leaders." "I want to create a self-managing team." Are you facing such concerns and challenges? The daily words and actions of a leader can significantly change the team. When just one leader changes, a team of dozens or even hundreds can achieve remarkable results, even with the same members. We will share know-how from real experiences on how both leaders and members can create a vibrant and fulfilling self-managing team.

[Lecturer] Professor, Aichi Institute of Technology, Comprehensive Technology Research Institute Member, Ministry of Economy, Trade and Industry, Subcommittee on Decarbonized Fuel Policy Member, Carbon Management Subcommittee, among others Mr. Motohiro Kondo [Former Toyota Motor Corporation] [Key Lecture Content] In our country, there are already recycling laws for specific products, and in the automotive sector, appropriate recycling and processing are progressing in accordance with the "Automobile Recycling Law." On the other hand, in response to carbon neutrality and the issue of marine plastic waste, the structure and materials of automobiles themselves are changing, and it is necessary to change our efforts towards recycling used products to facilitate the transition to a circular society. Additionally, some countries have already strengthened their initiatives, starting from addressing these environmental issues, with a focus on enhancing their industrial competitiveness and fostering new industries. In this seminar, we will explain the trends in these foreign countries and our country's policies, as well as efforts towards recycling automotive plastic waste in the formation of a circular society. [Lecture Items] 1. Direction of our country's efforts towards GX and CE 2. Trends in automotive recycling in foreign countries 3. Towards advanced automotive recycling 4. Summary 5. Q&A / Business card exchange

[Lecturer] Professor Kazuhiro Fukushiro, Graduate School of Technology Management, Yamaguchi University [Key Lecture Content] As the electric vehicle (EV) market grows, a pressing issue is the processing of used lithium-ion batteries utilized in EVs. From the perspective of environmental conservation and securing metal resources, the recycling of used lithium-ion batteries has become an urgent challenge. This lecture will explain the current state of upstream processes in recycling, such as the collection and dismantling of used batteries, trends in the development and practical application of recycling technologies like hydrometallurgical and pyrometallurgical processes, and the realities of domestic and international businesses involved in recycling. Additionally, it will touch upon the recycling of solid-state batteries, which are expected to be practical in the future. [Lecture Items] 1. Market trends for EVs and lithium-ion batteries for EVs 2. Structure, positive electrode materials, and lifespan of lithium-ion batteries 3. Collection and dismantling of used lithium-ion batteries 4. Recycling technologies (hydrometallurgy, pyrometallurgy, and others) 5. Development trends in recycling technologies for solid-state batteries 6. Realities and future prospects of the recycling business 7. Q&A