The waterproof board "Apia Shut," which demonstrates high waterproof performance with a simple set that only requires turning a handle, has been adapted to accommodate a maximum water level of 1.5m.

The waterproof board (water stop board) "Apia Shut," which demonstrates high waterproof performance simply by turning the handle, has been adapted to accommodate a maximum water level of 1.5m.

The "Apia Guard Apia Shut" has updated its hazard map in response to the increase in water damage caused by heavy rainfall that exceeds recent expectations, leading to more cases where waterproof boards (flood barriers) that exceed a water level of 1 meter are required. As a disaster-level flood prevention measure, the detachable waterproof board Apia Shut series can now accommodate water levels up to 1.5 meters. 【Features】 ■ High waterproof performance even at a water level of 1.5 meters ■ Easy-to-install long-type handle ■ Lightweight three-section panel design Additionally, various tools that can be stored compactly have been added. 【Storage Variations】 ◎ Storage hook (fixed type/wall-mounted) ◎ Vertical storage shelf (fixed type/floor-mounted) ◎ Storage box (movable/caster) ◎ Storage frame (movable/caster) ◎ Flat storage shelf (movable/caster) *For more details about the product, please refer to the catalog.

• Other safety and hygiene products

Easy installation with just a turn of the handle, featuring top-level water stop performance!

The waterproof board (water stop board) Apia Guard series developed by Suzuki Shutter, a specialized manufacturer of shutters and disaster prevention products. We are launching the detachable type waterproof board "Apia Shut," which achieves high water stop performance with easy installation! 【Features】 ■ Water stop performance equivalent to the highest rank Ws-6※1 ■ Leakage amount is only about 1 liter per hour※2 ■ Easy installation by simply turning the handle ■ Two options for the direction of operation (Tightening operation from the inside / Tightening operation from the outside) ※1… The water stop performance is indicated in accordance with the leakage amount grade (Ws) of JISA4716. However, since this JIS standard pertains to flood prevention equipment for fixtures such as shutters and doors, the leakage amount grade is indicated as "Ws-○ equivalent." These are internal test values and not guaranteed values. ※1… In the case of a three-sided frame type ※2… For an opening width of 2,000mm and a water level of 500mm

• others

Easy installation with just a turn of the handle, featuring top-level water shut-off performance!

The detachable waterproof board "Apia Shut," which achieves high water-stopping performance with easy installation, has added storage variations. Please make use of them along with the product. 【Storage Variations】 ■ Storage Hook (Fixed Type / Wall Mounted) ■ Vertical Storage Shelf (Fixed Type / Floor Mounted) ■ Storage Box (Movable Type / With Casters) ■ Storage Frame (Movable Type / With Casters) ■ Flat Storage Shelf (Movable Type / With Casters)

• others

Have you completed your flood prevention measures against heavy rain and typhoons? Prepare for flooding with the Apia Guard series of waterproof boards!

This catalog introduces the waterproof board (water stop board) series "Apia Guard" handled by Suzuki Shutter. With a rich lineup, it is widely adopted in various settings, from residential homes to commercial stores, financial institutions, and government offices. It prevents water intrusion from building openings, parking lot entrances, underground stair entrances, and entrances or lobbies. Please make use of it as part of your disaster prevention measures and BCP (Business Continuity Plan) strategies. 【Featured Products (excerpt)】 ■ Sheet Type: Waterproof Sheet III ■ Arch Type: Rakkut ■ Detachable Type: Apia Shut ■ Simple Detachable Type: Okudake ■ Upper Storage Type: Osudake ■ Waterproof Door: S Tight Door (1m, 2m) ■ Rising Type: Manual Lift Waterproof Board *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.