[Industrial Waste_Problem Solving Case] Solutions for crushing of fluff, crushing of home appliance plastics, and pre-treatment before incineration.

Active in large-scale fluff processing.

**Case Study on Problem Solving** ■ Effects of Implementation We have successfully crushed waste plastics to under φ20mm, allowing for stable shipments for cement fuel and paper mill fuel. It has demonstrated significant effects with performance as expected. The machine is quieter than anticipated. ■ Deciding Factors for Purchase With the proposal to utilize subsidies, we were able to proceed with the purchase of a larger model by keeping the budget lower than usual. By embedding the frame in the pit and arranging a steep conveyor, we were able to make effective use of space. ■ Model Introduced - UC-250 (250kw) - Screen Size: φ20mm - Application: Refuse-derived fuel (cement, paper mills) *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher

Contributing to the stable operation of the incinerator.

**Case Study on Problem Solving** ■Effects of Implementation By adjusting the particle size of the input material, we have been able to operate the incinerator stably. We are satisfied with the stable supply to the downstream equipment of the crusher. ■Deciding Factors for Purchase - The frame design considers ease of maintenance and wear resistance. - The flexibility in meeting the special requirement for outdoor specifications. - We were attracted by the ability to respond flexibly to other needs. ■Model Introduced - UC-132 (132kw) - Screen size: φ50mm - Application: Crushing for volume reduction and particle size adjustment before incineration of industrial waste. *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher

We would like to introduce a case where the UC series single-shaft crusher was introduced as a dedicated aluminum crushing machine.

【Case Study of Problem Solving】 ■Effects of Implementation When crushing aluminum of various shapes, the shredder produces shreds of the expected size, allowing for the discharge of materials suitable for downstream processes. ■Deciding Factors for Purchase The noise level during shredding was lower compared to other companies, and the processing capacity exceeded expectations. The ability to address both pre- and post-crusher equipment as a package was a key factor in the purchase decision. ■Model Introduced ・UC-200 (200kw) ・Screen Size: φ60 ・Features: Dedicated aluminum crushing machine *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

Recycling/energy recovery of 30 tons/month of waste generated within the company with added value.

**Case Study on Problem Solving** ■Effects of Implementation By crushing approximately 30 tons/month of waste generated in-house, such as poly drums, we were able to add value and recycle or convert it into fuel. ■Factors in Purchase Decision - It can effortlessly crush difficult-to-process materials like FIBC bags. The precision is excellent, and the cutting performance is outstanding. - Compared to other companies, the lower running costs were a decisive factor in the purchase. ■Model Introduced - UC-75 (75kw) - Screen size: φ30mm - Various conveyor systems for downstream equipment *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher

Active in the stable crushing of mixed plastic home appliances.

**Case Study on Problem Solving** ■ Effects of Implementation When crushing mixed plastic from home appliances, it can be coarsely crushed to the expected size, allowing for stable flow to downstream processes. ■ Deciding Factors for Purchase - Due to its low-speed rotation, the noise during crushing is very low, and the processing capacity met the expected test evaluations. - Compared to other companies, the initial and running costs were lower, which was a decisive factor for the purchase. ■ Model Introduced - UC-45 (45kw) - Screen Size: φ40mm - Application: Primary crushing of mixed plastic from home appliances *For more details, please refer to the PDF materials or feel free to contact us.*

• Crusher

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

We would like to introduce "Chibi 0.3" handled by FCR and Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 0.3ml). It is autoclavable and suitable for DMSO and liquid nitrogen vapor. We also offer screw caps for 96-well plates. 【Features】 ■ Polypropylene ■ Autoclavable ■ Compatible with DMSO ■ Suitable for liquid nitrogen vapor *For more details, please download the PDF or feel free to contact us.

The low-voltage fuse "SBFW-L M6" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. In automobiles, it is particularly effective for devices where the current momentarily increases significantly. It is recommended for those facing challenges related to circuit protection with low-voltage fuses (below DC70V) in the automotive and construction machinery industries. It plays a role in protecting the entire vehicle during abnormal conditions in circuits that supply power from the battery to the entire vehicle and in the power supply system.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!