Definition and Terminology of Industrial SSD Temperature - Part I

A 2.5-inch SSD equipped with 3D NAND designed for industrial use, capable of supporting large capacities up to 7.6TB, making it an ideal product for a wide range of applications.

Silicon Power 2.5" SATA SSD 【SSD3F0 Series】 • Equipped with high-quality 112-layer 3D TLC NAND flash technology • Supports TRIM command to erase unused data and maintain optimal performance • Achieves superior sustained performance through dynamic SLC caching algorithm • Activates read-only mode when the SSD reaches its write cycle limit to prevent data corruption • Improved product lifespan • Complete protection design with high-reliability industrial-grade integrated active PMU and OVP, OCP, surge removal, and short-circuit protection • External DRAM support for optimal sustained read and write performance • Power shield firmware architecture ensures resistance to power outages • AES256 encryption and TCG Opal 2.0 compliance (available upon request) • Compatible with SP SMART Toolbox Customization specifications are available, so please consult with us. For more details, please contact us through the related link.

• Memory

The DRAMless BiCS5 equipped SATAIII interface SSD MDA3K0E supports large capacities up to 1TB, making it ideal for industrial applications.

Silicon Power M.2 2242 SSD [MDA3K0 E Series] • Equipped with high-quality 3D TLC NAND flash (BiCS5) technology • Global wear leveling and detection of initial defective blocks • Supports TRIM, NCQ, DEVSLP commands, and ATA security features • Improved product lifespan • Compatible with SMART Toolbox Customization specifications are available, so please consult with us. For more details, please contact us via the related link.

• Memory

The MEC3H0S series is a PCIe 4.0 NVMe SSD for industrial rugged edge computing by Silicon Power.

Silicon Power M.2 2280 NVMe SSD [MEC3H0S Series] [MEC3H0E Series] The Silicon Power MEC3H0S Series achieves stable operation over a wide temperature range from -40°C to 85°C. It also adopts a high-level 12-layer PCB substrate and operates without moving parts, enabling more stable performance. It is an ideal product for extreme high and low-temperature environments as well as mobile environments. ◆ Achieves High-Speed Performance [MEC3H0S Series] Sequential Read: 7,200MB/s Sequential Write: 6,500MB/s [MEC3H0E Series] Sequential Read: 4,700MB/s Sequential Write: 3,800MB/s ◆ Supports Multiple Technologies Supports global wear leveling, ECC error correction, S.M.A.R.T. features, and Trim commands. Customization specifications are available, so please consult with us. For more details, please contact us through the related links.

• Memory

The Silicon Power M.2 2280 SSD MEC3F0 series for industrial use is ideal for applications such as high-quality image processing, where high performance is sustained.

Silicon Power M.2 2280 SSD 【 MEC3F0 Series】 • Equipped with high-quality 3D TLC NAND flash technology • Strict quality control and guarantee • Sustained processing capability with writing performance of over 1GB/s • Ideal for continuous writing applications such as image processing • Advanced thermal throttling management • S.M.A.R.T. compatible For more details, please contact us via the related link.

• Memory

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.

Features: ● Equipped with Intel Processor N150 / Intel Core 3 Processor N355 ● DDR5 4800MHz SODIMM ×1 (supports up to 16GB) (sold separately) ● HDMI 1.4 ×1, eDP 1.4b / LVDS ×1 ● Intel Ethernet Controller I226 (2.5GbE RJ-45 ×1), Realtek RTL8111H (1GbE RJ-45 ×1) ● Full-size mSATA / mPCIe ×1, M.2 2230 E-Key ×1 ● USB 3.2 Gen2[x1] ×2, USB 2.0 ×4 ● RS-232/422/485 ×2, RS-232 ×2 ● TPM 2.0, SATA 6Gb/s ×1, 4-bit GPIO, SMBus / I2C ×1 ● Fan-equipped heat sink available separately PICO-ASL4-FAN01: Heat sink with fan PICO-ASL4-HSK01: Heat sink PICO-ASL4-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure) * This is a model without an operating system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.