See You AI Japan releases 20Hz to wideband digital MEMS microphone.

Wideband digital MEMS microphones optimal for microphone arrays and beamforming.

Two new models of PDM output digital MEMS microphones have been introduced, designed for microphone arrays and signal processing, with a low frequency range starting from 20 Hz. Both models have a sensitivity of -26dB ±1 dB and an S/N ratio of 65 dB, featuring the top port type "CMM-4030DT-261075-TR" measuring 4.00 x 3.00 x 1.00mm and the bottom port type "CMM-3526DB-26165-TR" measuring 3.50 x 2.65 x 0.98mm. The MEMS microphones with digital signal output that support low frequency bands are user-friendly products suitable for applications such as beamforming, noise cancellation, and sound source localization, where multiple outputs are synthesized.

• Sensors
• Other electronic parts
• Noise Inspection

New product: Wideband MEMS microphone 20Hz to 20kHz

A new model has been introduced featuring a MEMS microphone with a minimum footprint of 2.75 mm x 1.85 mm, which specifies a phase tolerance of 20 Hz in the low frequency range, making it ideal for microphone arrays and signal processing. It is user-friendly for beamforming, noise cancellation, and sound source localization. This analog output type has a sensitivity tolerance of ±1 dB and a maximum S/N of 64 dB, covering the entire human audible range from 20 Hz to 20 kHz, suitable not only for multiple uses but also for a wide range of applications. With a thickness of just 0.9 mm to 1.00 mm, it is a new product that can be easily integrated into wearable and portable devices.

• Sensors
• Other electronic parts

IPX7 waterproof MEMS microphone, IP65 waterproof electret condenser microphone new product

A new model has been introduced featuring a MEMS microphone with a minimum size of 2.75 mm x 1.85 mm, which specifies a phase tolerance of 20 Hz in the low-frequency range, making it ideal for microphone arrays and signal processing. This model is user-friendly for beamforming, noise cancellation, and sound source localization. It has an analog output type with a sensitivity tolerance of ±1 dB and a maximum S/N of 64 dB, covering the entire audible range for humans from 20 Hz to 20 kHz. It is suitable not only for multiple uses but also for a wide range of applications. With a thickness of just 0.9 mm to 1.00 mm, it is a new product that can be easily integrated into wearable and portable devices.

• Sensors
• Other electronic parts

Minimum size 2.75 x 1.85 x 0.9mm, suitable for microphone arrays with a response range of 20Hz and above, digital type with low power mode.

A new thin type of MEMS microphone with a minimum area of 2.75 x 1.85mm has been introduced, featuring a thickness of 0.9mm. The low-frequency (20Hz~) compatible model is also ideal for microphone arrays such as noise cancellation. In the digital (PDM) type, a new compact model measuring 3.5 x 2.65 x 0.98mm has been released, equipped with a low-power mode for low current consumption.

• Sensors
• Other electronic parts

Ideal MEMS microphones for various portable electronic devices.

The CUI CMM series, boasting improved audio quality, performance, and high reliability, features a very compact housing with a low-profile footprint of 2.75 x 1.85 x 0.95 mm. This MEMS microphone is compatible with reflow soldering, providing designers with additional flexibility in applications requiring surface mounting. It is ideal for voice recording and voice capture in smartphones, tablets, smart home devices, and wearables. CUI's MEMS microphones are omnidirectional and offer analog or digital pulse density modulation (PDM) output with top or bottom port positions. Each model in the CMM series comes in circular or rectangular form factors, with sensitivity ratings ranging from -44 dB to -26 dB and signal-to-noise ratios from 57 dBA to 65 dBA. This MEMS microphone also provides reduced vibration sensitivity, a low current of at least 80 microamperes (µA), and a wide operating temperature range from -40°C to +105°C.

• Other electronic parts

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

We will clearly explain the basic concepts for understanding the characteristics of each column and strategically selecting the most suitable column for your research and analysis purposes, along with practical selection points. We will also touch on column selection for GC/MS, aiming for a broader acquisition of knowledge. The choice of column is a crucial factor that influences the results of GC analysis. Commercially available columns have various features, such as the type of liquid phase, inner diameter, length, and film thickness. This is an excellent opportunity to deepen your understanding of GC columns, so please take a look.

Publication of a specialized analytical method for ultra-short-chain PFAS analysis, presented at the 59th Annual Meeting of the Japan Society of Water Environment (March 2025)! "Development of an analytical method for ultra-short-chain and short-chain PFAS in drinking water and environmental water using LC-MS/MS."

Tokyo, August 15, 2025 - (JCN Newswire) - T. Rowe Price Japan Co., Ltd. (Chiyoda-ku, Tokyo; President and CEO: Naoyuki Honda), the Japanese subsidiary of T. Rowe Price, a global asset management company based in Baltimore, Maryland, USA, which operates investment management services in 16 countries and leads the industry in active management, has announced the addition of a new "monthly settlement and forecast distribution type" fund to the existing mutual funds "T. Rowe Price U.S. Growth Stock Fund (nickname: American Royal Road)" and "T. Rowe Price U.S. All-Cap Equity Fund." The new funds will be established and begin operations on August 18, 2025. The "monthly settlement and forecast distribution type" fund will be available through Mizuho Securities Co., Ltd. URL https://acnnewswire.com/press-release/japanese/101921/

Tokyo, August 14, 2025 - (JCN Newswire) - Global consulting firm AlixPartners (hereinafter referred to as "the Company") has conducted a survey of industry experts involved in turnaround and restructuring in Asia and has released the latest report titled "2025 Asia Turnaround & Restructuring Survey" (hereinafter referred to as "the Survey"). The results of this survey indicate that, amidst ongoing geopolitical tensions affecting the economic situation, there is an optimistic outlook in Asia regarding global market instability and uncertainty. On the other hand, over 90% of respondents predict that geopolitical turmoil, such as regime changes and conflicts, will lead to an increase in corporate underperformance in the Asia region. Additionally, about 70% believe that global supply chain challenges will worsen over the next year, indicating that as international circumstances become more complex, the impact of such changes on Asian businesses is expanding. URL https://acnnewswire.com/press-release/japanese/101854/