We will exhibit at the Monozukuri Fair 2023.

This is a diaphragm-type polarographic sensor that can be used for a wide range of residual chlorine measurement applications, including pure water, seawater, wastewater, food, and groundwater.

The Q46H/62-63 residual chlorine meter adopts a polarographic membrane sensor, allowing for the direct measurement of free chlorine, active chlorine, and combined chlorine (monochloramine) without the need for reagents. Due to its diaphragm-type sensor, it is less affected by changes in the measurement liquid or impurities, enabling the measurement of residual chlorine in electrolyzed hypochlorous water, seawater, wastewater, hot springs, and pure water. Additionally, since the electrode does not come into direct contact with the measurement liquid, it is less prone to contamination and has a long lifespan. By adding a pH sensor option, simultaneous measurement of chlorine and pH is possible. The pH correction function allows for measurements even when the pH value is high or fluctuating. It has a wide measurement range, capable of measuring low concentrations below 1 mg/L and high concentrations above 100 mg/L with a single unit. 【Features】 ■ No reagents required ■ Easy installation ■ Wide and flexible measurement range ■ Cost-effective *Demo units are available, so please feel free to inquire. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Compact, lightweight, low-cost, and maintenance-free. It has a wide operating temperature range and does not require a straight tube section.

The VISION series flow meter is a compact flow sensor for liquids. A small turbine inside the flow meter rotates and outputs pulses proportional to the flow rate. It is compact, lightweight, low-cost, and requires no maintenance. It has a wide temperature range and can handle pressures up to 2.5 MPa, making it capable of measuring various liquids. Since it is made of transparent resin, the flow of the liquid inside and the operation of the turbine can be observed. Main measurement liquids: water, hot water, drinking water, pure water, light oil, detergents, etc. Main applications: cooling water, cooking equipment, coffee machines, laser cooling water, semiconductor devices, automotive-related equipment, agricultural equipment, dialysis-related devices, water treatment equipment, common rail, hypochlorous acid water generation devices, etc.

• Flow Meter
• Flow Control

PDM+ is a gas detector that continuously measures concentrations to detect a lack of oxygen in the environment and the presence of toxic gases.

PDM+ is a gas detector that continuously measures concentrations to detect the lack of oxygen and the presence of toxic gases in the environment. PDM+ allows for continuous concentration measurement by replacing the battery and sensor. When powered on, PDM+ continuously monitors whether the target gas is present in the air and warns the user with alarms through LED lights, vibrations, and sounds if there is a possibility of entering a dangerous state. Additionally, it can be used for up to three years by turning off the power after use. PDM+ is easy to operate, and it features a strong metal clip on the back of the unit, allowing it to be secured to shirts, belts, helmets, and more. The PDM+ gas detector is compatible with the Watch Docking Station and WatchGas IR Link. Both devices have the capability to download data from the PDM+ single-component gas detector. The latest 30 historical records are stored in the internal logger of the unit. Oxygen, carbon monoxide, hydrogen sulfide, hydrogen, sulfur dioxide, ammonia, hydrogen peroxide, nitrogen dioxide.

• Other safety equipment

WatchGas NEO is a state-of-the-art portable VOC monitor capable of detecting from 1 ppb to a maximum of 20,000 ppm.

VOCs include various chemical substances such as benzene, alcohol, fuels, thinners, and industrial solvents, which can have adverse effects on health both in the short term and long term. Measuring these compounds is essential for protecting workers in industries such as oil and gas, fire and hazardous materials, and pharmaceuticals. Additionally, VOC monitoring helps in the management of chemical substances. Furthermore, VOC monitoring aids in controlling chemical processes, detecting leaks and releases into the environment, and measuring indoor air quality. The NEO offers a range of models tailored to various applications, from the highly sensitive 1 ppb to a maximum of 15,000 ppm, including a version specialized for benzene (NEO BENZ). Its innovative design featuring a photoionization detector (PID) and ultraviolet (UV) lamp provides excellent sensitivity, stability, and reproducibility. As an option, real-time data monitoring is possible using the WatchGas Suite application software with the built-in wireless modem.

• Other measurement, recording and measuring instruments
• Other safety and hygiene products

It is possible to monitor toxic gases, oxygen (O2), combustible materials (LEL), carbon dioxide (CO2), and volatile organic compounds (VOC).

The POLI with pump is an advanced model with a built-in pump that allows for a full selection of sensors to accommodate a wide range of applications, including access to confined spaces. POLI is a basic 4-gas diffusion detector designed to ensure the safety of workers in hazardous locations. The smart sensors carry calibration and ID information, allowing for quick on-site replacement during hazardous material responses. Both versions of POLI feature a robust construction and are easy to operate with just two buttons. The unique man-down alarm function notifies nearby workers if the user becomes incapacitated. Key Features: - A wide variety of "plug and play" smart sensors - Rechargeable lithium-ion battery with up to 60 hours of life - Pump off switch to save battery and enable long operation times - Automatic flow fault detection for the pump - 360-degree rotating LED alarm bar - Man-down alarm - USB micro charger & communication cable - Flip screen - 6 months of continuous data logging - Durable double-shot case - Combination of two IR/PID sensors possible - Hose length support up to 30 m

• Other safety equipment

WatchGas QGM detects oxygen, hydrogen sulfide, carbon monoxide, and combustible gases (LEL).

The WatchGas QGM detects oxygen, hydrogen sulfide, carbon monoxide, and combustible gases (LEL). When the concentration of these gases exceeds the alarm threshold, the WatchGas QGM warns the user with vibrations, LED flashing, and a 90dB acoustic alarm. The integrated data and event logger records measurements, peak values, average values, alarms, calibration dates, and bump test information for up to two months. All logs can be downloaded to a PC using the WatchGas IR-link software. The QGM can be used as a monitor for 1 to 4 types of gas detectors. It comes standard with a contact combustion-type LEL sensor, and it is also possible to equip the QGM with an NDIR LEL sensor. The NDIR LEL sensor consumes less power and achieves a battery life of up to two months on a single charge. The IR LEL sensor has several other advantages, including the ability to measure combustible gases in the absence of oxygen, making it suitable for use in environments where oxygen concentration varies. It is also less affected by silicon and sulfur. Furthermore, the QGM is capable of measuring oxygen, carbon monoxide, and hydrogen sulfide.

• Other safety equipment

WatchGas UNI is a compact and user-friendly single gas monitor.

UNI provides a simple portable solution for measuring various toxic gases and oxygen levels. It features a large LCD screen that maximizes readability on-site. Additionally, it has six bright red LEDs and a large buzzer for alarm notifications. Furthermore, it is equipped with a vibration alarm, allowing for safe operation even in noisy work environments or while wearing hearing protection. To ensure protection in harsh environments, UNI is made from durable and robust materials. Its surface is designed with a rounded shape that offers a good grip, making it easy to use even when wearing multiple layers of protective clothing. It can detect carbon monoxide, hydrogen sulfide, oxygen, sulfur dioxide, chlorine, nitrogen monoxide, nitrogen dioxide, hydrogen, phosphine, ethylene oxide, ammonia, chlorine dioxide, ozone, hydrofluoric acid, hydrochloric acid, hydrogen cyanide, methyl mercaptan, tetrahydrothiophene, acetaldehyde, arsine, and phosgene.

• Other measurement, recording and measuring instruments
• Other safety equipment

Sanitary drum pump ideal for transferring, portioning, and filling in the beverage and food market! It comes with a hose and nozzle, so it's ready to use immediately!

This is a set that includes a sanitary pump, hose, and nozzle. You can use it immediately with this one unit. 【Features】 - Sanitary design for hygiene - Pump and hose with a structure that is easy to clean and disassemble - Available in electric drive or air drive options - Lightweight and easy to carry

• Special Pump
• Food Conveyor Equipment

Capable of transferring high-viscosity fluids at up to 100,000 cps! A wide range of industrial drum pumps boasting excellent durability and strength!

This catalog features a wide range of products from STANDARD PUMP that meet global safety standards including UL, CSA, and AtEx. Starting with the "Polypropylene Series," suitable for the transfer of chemical fluids, we also offer the "CPVC Series," designed for the transfer of a wide variety of corrosive fluids in the water treatment industry, and the "PVDF (Kynar) Series," among others. Additionally, we have low-viscosity drum pumps with a transfer capacity of over 100L/min, as well as high-viscosity drum pumps capable of transferring fluids with viscosities up to 100,000 cps. Please use this information to assist in selecting products. [Contents (Excerpt)] ■ Polypropylene Series ■ CPVC Series ■ PVDF (Kynar) Series ■ Aluminum Series ■ Stainless Steel (SUS) Series [Features] ■ Capable of transferring high-viscosity fluids up to 100,000 cps ■ Pump drive sources can be selected from electric or air ■ Fewer parts for easy disassembly, cleaning, and maintenance ■ Main applications: urethane, grease, adhesives, high-viscosity fluids, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Flow Meter

Ideal for transporting water treatment chemicals, sterilization, disinfection, and cleaning solutions! Transfer from drums and containers! CPVC material drum pump!

The STANDARD Pump Company's "Chemical Drum Pump for Water Treatment" is a high-quality and safe drum pump. Additionally, it is possible to purchase only the tubes or parts, and it has been highly regarded for its maintenance service. 【Features】 ○ Ideal for the transfer of chemicals and solutions associated with industrial water treatment ○ Applicable fluids → Sodium hypochlorite / Sodium hypochlorite solution → Calcium chloride → Potassium hydroxide → Potassium hydroxide (caustic potash) → Fluids containing sodium bromide → Chlorination treatment (disinfectants, neutralizers, hand sanitizers) *The above are representative examples. Other fluids can also be measured. We can provide a demonstration. Please feel free to consult us.

• Other pumps

Enhance the manufacturing line! Drum pump system with a lightweight and portable lifter.

The "Standard Pump Drum Pump System with Lifter" features a lightweight and portable design, allowing operators to easily move the lift anywhere within the facility. It is ideally suited for use with drums, kettles, tote tanks, and containers with sanitary liners. With a robust design, it can support pumps weighing up to approximately 57 kg and is capable of handling viscosities exceeding 100,000 cps. 【Features】 ■ Lightweight and portable ■ Rechargeable battery pack ■ Ideal for sanitary and industrial applications *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other pumps

High-viscosity foods are also OK! A sanitary pump that is hygienic and easy to maintain.

The STANDARD PUMP company's "SP 800DD series" is designed for transferring viscous foods, pharmaceutical ingredients, and lotions from drums and tanks. As a single-screw pump, it is ideal for high-viscosity liquids such as concentrated juices, sauces, and chocolate. It can handle viscosities of up to 100,000 cps. 【Features】 - Excellent continuous metering transfer capability with minimal product degradation - Easy disassembly - Hygienic design that allows for easy cleaning and maintenance - Outstanding safety compliant with strict U.S. sanitary standards 3A and FDA For more details, please contact us or download the catalog.

• Other pumps

Robust and efficient! A hygienic clean drum pump for sanitary fluid transfer.

The "SP8600 model / SP8700 model" is a sanitary pump designed for hygiene and sterilization, manufactured with materials and structures that meet FDA standards. It is ideal for transferring various fluids such as juice, concentrated liquids, beer, wine, and cosmetic liquids from various containers and tote tanks. 【Structural Features】 ■ Easy to clean ■ Tri-clamp fittings ■ Lightweight and portable ■ Variable speed electric motor and air motor ■ Dry running For more details, please refer to the catalog or feel free to contact us.

• Other pumps

It has excellent reliability and chemical resistance due to its robust PVD coating.

The standard PVDF pump tube is designed for the transfer of common corrosive fluids used in the water treatment industry, offering excellent reliability and chemical resistance due to its robust PVDF construction. 【Applicable Fluids】 ■ High-concentration nitric acid ■ Sulfuric acid with a Baume degree of 66 ■ Sodium hypochlorite ■ Hydrofluoric acid ■ Propionic acid ■ Stearic acid, etc. *The above are representative examples. Other fluids can also be measured. We can provide a demonstration. Please feel free to consult us.

• Other pumps

Ideal for the transfer of chemical fluids due to its sturdy polypropylene.

The standard polypropylene pump tube is designed for the transfer of a wide range of corrosive fluids and is ideal for transferring stimulating chemical fluids due to its robust polypropylene material. 【Applicable Fluids】 ■ Acetic acid ■ Nitric acid ■ Sulfuric acid ■ Alkali ■ Hydrochloric acid ■ Ferric chloride, etc. *The above are representative examples. Other fluids can also be measured. We can provide a demonstration. Please feel free to consult us.

• Other pumps

Easy installation on drum rails! Drum pumps that can be made with materials suited for the fluid.

DELLMECO drum pumps are manufactured with various materials to suit different fluids. For PE, PTFE (conductive), aluminum, and AISI316L, the pump diameter is up to 1”, designed for fluids of various viscosities. They are easy to install on drums or rails, and we also produce plastic or metal pumps in sizes of 3/8", 1/2", 3/4", and 1". 【Features】 - All necessary mounting hardware is included for plastic or metal pipe assemblies. - Chemical-resistant adapter kit. - An adapter that fits perfectly on the drum allows the suction tube to be installed at the required position. - The standard lengths of the tube are 1m and 1.2m (length modifications are possible). For more details, please contact us or download the catalog.

• Other pumps

This is a diaphragm pump ideal for the transfer of food, drinking water, and cosmetics in industrial applications.

We have a system that automatically performs cleaning and disinfection for CIP (Clean-in-Place) and SIP (Sterilization-in-Place) without the need to disassemble and reassemble the pump. It features a clamp design that allows for quick removal without tools. The wetted parts and external finish are made of sanitary electropolished stainless steel (SUS). The diaphragm is made of high-purity TFM (PTFE) material suitable for food grade applications. 【Main Features】 ■ Easy to remove ■ Smooth surface ■ Highest level of finishing ■ Clean air valve ■ Diverse connection types ■ Pump designed for CIP and SIP systems For more details, please refer to the catalog or feel free to contact us.

• Other pumps

The chemical back pressure valve prevents siphoning and allows for pressure adjustment! It uses a highly chemical-resistant PTFE diaphragm! A back pressure valve for high pressure!

This is a back pressure valve made of various materials such as stainless steel, Hastelloy C, Alloy 20, and titanium. It has a function to prevent siphoning phenomena! It can be used in high-pressure and high-temperature lines. Additionally, by controlling the pressure, it stabilizes pulsation phenomena and the amount of fluid injection, leading to improvements in the quality of the system and units. Due to its simple structure, parts can be replaced and pressure adjustments can be made without removing it from the line!

• valve

The chemical relief valve (safety valve) prevents excessive pressure! It uses a highly chemical-resistant PTFE diaphragm! A relief valve for high pressure!

This is a relief valve made of various materials including stainless steel, Hastelloy C, Alloy 20, and titanium. It prevents excessive pressure in the system! It can be used in high-pressure and high-temperature lines. Due to its simple structure, parts can be replaced and pressure adjustments can be made without removing it from the line!

• valve

PTFE flange connection back pressure valve/relief valve! Machined from solid PTFE! Ideal for applications requiring chemical resistance, such as sulfuric acid!

PTFE flange relief valve and back pressure valve! Machined from solid PTFE! Prevents siphoning phenomena and enables pressure control. Ideal for applications requiring sulfuric acid resistance! Due to its simple structure, parts can be replaced and pressure adjustments can be made without removing it from the line! With materials like PTFE, it adapts to various fluids!

• valve

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

When conducting structural analysis of organic compounds, IR, NMR, and MS can be considered the three sacred treasures. If the analysis is performed correctly, it is possible to elucidate the structure of even quite complex compounds. However, actual spectra are often not of a single compound, as seen in textbooks, which can lead to significant challenges in interpreting results for beginners in analysis. Additionally, while database searches are a useful tool in structural analysis, the ability to read spectra is necessary to select the correct structure from among the candidates, not just pattern matching. In this course, we will lecture on the basic ways to interpret IR, NMR, and MS spectra, including simple explanations of principles, points to be aware of during analysis, and how to proceed with actual analysis, incorporating some exercises as well.

◆Mechatrotech Japan 2025 —◆ Troax Safety Systems Co., Ltd. will be exhibiting at "Mechatrotech Japan 2025." ■ When it comes to steel safety fences, think "TROAX" - We will showcase steel safety fences used around robots, equipment, and conveyor lines. ■ The safety guard "FlexGuard" absorbs impact with flexible materials and boasts excellent durability - This safety guard ensures the safety of workers in environments where people and "machines/vehicles" interact, such as manufacturing sites, truck areas, and packing areas. At our booth, our staff will be available to answer various questions and address challenges related to products and safety measures on-site. We sincerely look forward to your visit.

Luminex Japan Co., Ltd. will exhibit at the 33rd Annual Meeting of the Japanese Society for Organ Transplantation, held at Nagasaki University from October 3 (Friday) to October 5 (Sunday). Please feel free to consult us at our booth regarding any questions about Luminex systems. We would also love to hear your feedback and requests!

[Speaker] Yuri Ishii, Deputy Director, Environmental Economics Division, Minister's Secretariat, Ministry of the Environment [Key Lecture Content] This guide has been created with the intention of assisting companies in responding to the increasing demands for disclosure in various environmental fields, such as climate change and natural capital, and was published in June of the 7th year of Reiwa. The "integrated approach" introduced in this guide suggests that companies should not respond individually to the disclosure requirements in each environmental field, but rather engage with an awareness of their interconnections. Through this initiative, we aim to improve business processes under management involvement, effectively and efficiently address various environmental issues, and facilitate disclosure. The key points of the guide will be explained. [Lecture Items] 1. Expansion of environmental issues to be addressed 2. Significance of integrated initiatives and disclosure 3. Trends in sustainability-related information disclosure 4. Methods and benefits of integrated initiatives and disclosure; case studies of companies 5. Utilization of environmental due diligence for information disclosure 6. Q&A / Business card exchange