[Attention] Six Benefits of LED Lighting Beyond Energy Savings

High brightness yet saves over 70% in power consumption! This is the environmentally friendly fluorescent light!!!

The "LB819 series" is an LED fluorescent lamp with a built-in power supply and single-side power feeding. ■ Safe Circuit Design - Circuit design that suppresses excessive inrush current during initial lighting - Circuit design that suppresses harmonics - Circuit design with an efficiency rate of over 90% - EMI (electromagnetic interference) suppression circuit design ■ Achieving an LED Lamp Design Life of 40,000 Hours - Main electrolytic capacitors have achieved test results with a design life of over 60,000 hours ■ Other Safety Circuits - Overcurrent and overvoltage protection circuits - Safety short-circuit function circuit ■ Electrolytic Capacitors 1. Achieved a test design life of 65,223 hours (7.447 years) at an operating temperature of 77.8°C 2. Achieved a test design life of 73,882 hours (8.434 years) at an operating temperature of 80.2°C 3. Achieved a test design life of 78,908 hours (9.008 years) at an operating temperature of 79.3°C 【Lineup】 3000K / 5000K / 5700K (Note: 4000K is made to order)

• LED lighting

Single-sided power supply type with built-in LED.

This is a 40W model (1250×153×84). It is painted white and is very useful in various scenes. 【Features】 ■ PSE certification obtained ■ Durability It is not made of plastic, so it is sturdy and long-lasting.

• LED Module

Single-sided power supply type with built-in LED.

There are 20W type (608×78×52) and 40W type (1250×84×58). The color is white paint, and it performs excellently in various scenes. 【Features】 ■ PSE certification obtained ■ Durability Since it is not made of plastic, it is sturdy and long-lasting.

• LED Module

Single-sided power supply type with built-in LED.

This is a 40W model (1250×190×87). It is painted white and is highly versatile for various scenes. 【Features】 ■ PSE certification obtained ■ Durability It is not made of plastic, so it is sturdy and long-lasting.

• LED Module

Single-sided power supply type with built-in LED.

There are 20W type (647×135×88) and 40W type (1265×135×88) available. The color is white, and it performs excellently in various scenes. 【Features】 ■ PSE certification obtained ■ Durability It is not made of plastic, so it is sturdy and long-lasting.

• LED Module

Power supply built-in LED type with single-sided power supply method.

There are 20W type (647×185×74) and 40W type (1265×185×74) available. The color is white paint, and it performs excellently in various scenes. 【Features】 ■PSE certification obtained ■Durability Since it is not made of plastic, it is sturdy and long-lasting.

• LED Module

A power separation type that can respond quickly to natural disasters such as lightning has emerged! It is made in Japan, yet low-cost and high-spec!

The Honest Original "ZF series" is a Japanese-made LED floodlight. It boasts top specifications while being offered at a low price (number one in the industry). The aluminum can withstand environments of up to 50°C, and the stainless steel can handle environments of up to 70°C. It is also equipped to handle harsh waterproof conditions with an "IP66 level" (power supply and surge protection are IP67). Despite being salt-resistant, it is designed to withstand recent extreme weather with a standard lightning surge protection of 20kV. 【Features】 ■ Made in Japan, ensuring peace of mind from production to manufacturing ■ 5-year warranty confidence * Warranty conditions apply (please refer to the catalog for details) ■ PSE certification obtained ■ Salt-resistant specifications Aluminum: 6063 aluminum alloy + salt-resistant coating Stainless steel: 6063 aluminum alloy + salt-resistant coating / Arm and hinge made of SUS316 stainless steel * The salt-resistant coating is applied with 100 microns of polyester resin powder coating throughout.

• Floodlight

Waterproof standard IP66 specification that does not affect ship radio communication.

The Honest Original "V Series" is an LED floodlight that can be used on ships. It is also effective in various locations other than ships (see the applications and achievements below). 【Features】 ■ Completely waterproof, with IP66 rating for waterproofing and dustproofing, and has passed salt spray testing. ■ Compliant with PSE Electrical Appliance and Material Safety Law for safe use. ■ Equipped with a temperature protection circuit that automatically turns off the light if the power supply reaches a maximum temperature of 95°C. ■ Strong salt-resistant specifications, made of 6063 aluminum alloy with salt-resistant coating, and the arm and hinge parts are made of SUS316 stainless steel. ■ Standard lightning surge protection of 20kV, limiting current during lightning strikes for protection. ■ Compliant with EMS/EN61000-4-5, providing preparedness for natural disasters. *For more details, please refer to the PDF materials or feel free to contact us.

• Floodlight

Achieves high-power illumination equivalent to a 400W mercury lamp! With an IP65 waterproof rating, it can be used in salt-damaged areas both indoors and outdoors!

Massive deployment of Philips LED chips achieves high-power illumination. With excellent corrosion resistance, it adapts to external environments, making it recommended for lighting in high-ceiling factories, gymnasiums, and sports facilities. It has excellent heat dissipation, and automatically turns off when the maximum temperature of the power supply reaches 95°C. (※ The product has a built-in temperature protection circuit in the power supply.) 【Features】 ■ IP65 waterproof and dustproof, safe to use even in bad weather. (※ Using it during heavy rain from typhoons may risk internal water ingress.) ■ Standard specification for 6kV lightning surge, compliant with voltage standards set by IEC (International Electrotechnical Commission). ■ Confidence with a 5-year warranty, PSE certification obtained.

• LED Module

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.