Notice of Membership in the Japan Electrical Manufacturers' Association (Abbreviation: JEMA)

Maximum output 12kVA, continuous operating output 9.9kVA three-phase (power) off-grid inverter (patent and utility model acquired)

The iGen.10000IV is a unique three-phase (power) inverter developed by Daishin, born from the development of large inverter generators, with a maximum output of 12kVA and a continuous operating output of 9.9kVA, providing a pure sine wave output. Utilizing the technology and experience gained from inverter generator development, we have obtained various patents and utility models. ■ [Patent] Parallel Operation Method Can be connected in parallel. Easily increases output. ■ [Patent] Inrush Current Support Supports inrush current for motor equipment. Can operate a 5.5kW motor. *This varies depending on the equipment used, so please contact us for details. ■ [Utility Model] Digital Inverter with Special Circuit Incorporates a special circuit with various built-in protection functions. It can be used in combination with solar power generation, storage batteries, V2H systems, etc., to build off-grid environments for three-phase (power) applications and for disaster prevention and BCP measures. *For more details, please refer to the product catalog available for download in PDF format. Feel free to contact us as well.

• Other energy equipment

Easily convert single-phase (lighting) 200V to three-phase (power) 200V.

"I want to introduce a three-phase 200V machine, but the power contract is a hurdle..." For those who have such concerns. ✅ Directly output three-phase 200V from single-phase 200V! ✅ No need for power contracts or electrical work! * Connection work to the distribution board may be required. ✅ Three-phase equipment can be used directly in factories, farms, maintenance shops, temporary sites, and more! Daishin's 'iGen.10000PT' is a single-phase to three-phase converter with a maximum output of 12kVA and a rated output of 9.9kVA. It is equipped with a uniquely developed inverter that has obtained various patents and utility models, allowing for easy conversion of single-phase (lighting) 200V to three-phase (power) 200V. * For more details, please check the product catalog from "PDF Download." Also, feel free to contact us.

• Converters and Transducers

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA