【Video Update!】Introduction of the Folding Water Stop Board F-shield

Anyone can easily, quickly, and conveniently implement flood prevention measures with the foldable water barrier F-shield.

This is a water barrier made by Furukawa Electric to prevent flooding damage caused by typhoons, floods, and torrential rains, serving as an alternative to sandbags. It can be stored compactly when folded during normal times. In the event of a disaster, simply installing three components on the ground demonstrates excellent water resistance and stability. It can quickly respond to sudden flooding damage. 【Features】 ■ Easily and securely prevents flooding into buildings! - It has excellent water resistance with a height of 50 cm and a leakage rate of approximately 200 liters/(h·m²). (Note) This result is based on internal tests referring to JIS A 4716. (Note) The values are experimental values at a water level of 50 cm and are not guaranteed. ■ Can be stored compactly and is easy to manage! - It can be folded and stored in shelves or tight spaces, so it does not take up much space. ■ Anyone can easily and quickly carry and assemble it! - It can be quickly and easily installed in various locations such as in front of entrances, factories, underground parking lots, and garages without the need for construction. - It can be set up in about 2 minutes for a 2-meter opening. - It is lightweight, making it easy for women to carry. HP: https://www.furukawa.co.jp/foam/product/f-shield/

• Other safety and hygiene products

Can be easily installed by one person in a short time, contributing to flood damage prevention. Lightweight and space-saving for storage. The maximum water stop height is 50 cm.

The "F-shield" is a lightweight water barrier that can be easily assembled by placing it on the ground and locking the fittings, effectively preventing flooding damage from typhoons, floods, and sudden heavy rain. When folded, it becomes as thin as 80mm, allowing for space-saving storage in narrow areas such as shelves, entrances, garages, and warehouses. The water barriers can be connected to each other, and the connection points allow for a maximum width adjustment of 50mm, as well as an angle adjustment of ±5°, making it adaptable to various widths and shapes of openings. 【Features】 ■ Leakage amount: Approximately 200L/(h·m2) *This is not a guaranteed value, but our test result. ■ Lightweight at 5.8kg per piece (5.3kg for end pieces). ■ Can be installed for 10 meters with just one person in about 10 minutes. ■ Reusable and long-lasting. ■ No special construction required, and easy to dispose of. *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• others

Lightweight, quick, easy, and convenient flood prevention product compared to sandbags: Folding flood barrier F-shield.

Mr. Yamamoto is responsible for the overall safety management operations of the company at the Safety and Environment Department of Special Spring Industry Co., Ltd. "There are first-class rivers, the Inagawa River and the Darokugawa River, flowing near our factory, and there is a risk of these rivers flooding when typhoons or linear precipitation zones occur. In fact, a major typhoon passed through Hyogo Prefecture in 2018, and at that time, the situation was very close to a river flood. Therefore, it was necessary to present a sufficient BCP (Business Continuity Plan) to our customer, the automobile manufacturer, in preparation for potential river flooding." "The foldable water stop board F-shield is lighter than sandbags, making it easy to transport and set up. Unlike sandbags, there is no need for the cumbersome task of filling or emptying water; it can be easily set up and taken down by simply locking the fittings." A new disaster prevention warehouse has been established right next to the factory's main gate, where the foldable water stop board F-shield is stored, ensuring that it can be set up immediately in case of an emergency. "I would like to win the trust of our customer, the automobile manufacturer, by presenting a sufficient BCP (Business Continuity Plan) in preparation for river flooding."

• Other safety and hygiene products

Lightweight, quick, easy, and convenient flood prevention product compared to sandbags: Folding flood barrier F-shield.

Mr. Kamiyama is involved in the management of two companies: Miyauchi Construction Co., Ltd., which is engaged in the construction industry, and Koshiki Fruit Garden Co., Ltd., which is involved in the production, processing, sales, and café operation of passion fruit. "The area around our company is at a low elevation, and due to the phenomenon known as 'abiki,' the road can become flooded as the sea level rises and falls repeatedly in a short time. Three years ago, for the first time, we piled sandbags in front of the fruit processing factory, but it was a very challenging task. The occurrence happened around 8 PM, and I had been drinking, so I couldn't drive the truck. Therefore, I asked a colleague to transport the sandbags stored in the fire department's warehouse by car. 'Abiki' can cause the water level to rise in about 30 minutes. I felt that there wouldn't be enough time to go and get the sandbags and stack them." "The foldable water barrier F-shield takes up little space when stored folded and can be set up quickly. It is lightweight, making it easy for elderly women working at our processing factory to handle, and it looks better than sandbags, so we can safely place it in visible areas. I want to be well-prepared for sudden 'abiki' with the foldable water barrier F-shield."

• Other safety and hygiene products

Lightweight, quick, easy, and convenient flood prevention product compared to sandbags: Folding water barrier F-shield.

**Expert in Power Distribution Board Manufacturing: Takahashi Electric Co., Ltd.** Mr. Watanabe works in the General Affairs Department of Takahashi Electric Co., Ltd., which is responsible for the manufacturing of power distribution boards that are indispensable in modern social infrastructure. **Risk of Rainwater Intrusion into the Factory! Safety Measures and Risk Management at the Sheet Metal Factory** "At the entrance of our sheet metal factory, a small forest is encroaching, and during typhoons or heavy rain, there is a risk that rainwater will flow from the forest into the factory entrance. Since there are expensive equipment such as laser processing machines inside the factory, it was necessary to implement risk management to prevent rainwater from entering the factory entrance. We considered stockpiling sandbags, but they are heavy and deteriorate quickly, causing the contents to spill out. Therefore, we concluded that sandbags were insufficient as a safety measure for the factory." **Preparing for Flood Damage to the Factory with the Folding Water Stop Board F-shield** "The folding water stop board F-shield is easy to handle because it is foldable, allowing for timely storage and movement. Additionally, its bright yellow color enhances visibility, which is also appealing. I like that it is more durable compared to sandbags, making it user-friendly."

• Other safety and hygiene products

Usable both during normal times and in emergencies! A shelter mat with three functions: wall cushioning material, floor mat, and partition!

The "Skill-Free Evacuation Mat" is a polyethylene foam mat that has three functions: cushioning material, floor mat, and partition. During normal times, it functions as a cushioning material to protect children and the elderly from injury by being attached to the walls of evacuation shelters without occupying storage space. On the other hand, during evacuation, it can be used as a floor mat or partition to ensure comfort, privacy, and social distancing, contributing to the improvement of the living environment in evacuation shelters. 【Features】 - High cushioning properties and a thickness of 30mm provide a comfortable seating experience! - High thermal insulation suppresses cold from the ground! - High water resistance allows for washing! It is hygienic as it does not harbor mold or insects! - Used as a partition to ensure privacy and prevent virus droplets! - Easy assembly by simply sticking Velcro together! Even children and foreigners can intuitively assemble it! - Usable as a kids' space or cushion for everyday use! Product HP: https://www.furukawa.co.jp/foam/mat/

• plastic
• Other safety and hygiene products
• Other office supplies

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

"Because it's an invisible place, we won't overlook it." Japan's climate is characterized by high temperatures and humidity, and particularly after typhoons and heavy rains, the conditions can be harsh for homes. It's not just the roofs and exterior walls that are affected by rain and wind. The area beneath the floor is actually the most susceptible and often overlooked point. This time, we will explain the "checkpoints for under the floor" that should be confirmed after a typhoon or heavy rain, the "responses" if abnormalities are found, and measures for preventing recurrence. [Table of Contents] ■ Why is underfloor checking necessary? ■ Checkpoints to confirm after a typhoon or heavy rain ■ Responses when damage is discovered ■ Points for preventing recurrence ■ Suggestions from Seihou Products ■ Summary Please be sure to read the [related materials] and [related links]. ↓ ↓ ↓

Explosion-proof motors available in stock We will deliver within 7 days to meet your delivery schedule. 【What is an explosion-proof motor?】 In factories and plants, flammable gases and vapors are present. When these mix with air and come into contact with an ignition source, an explosion or fire can occur. This motor is designed with measures to eliminate such ignition sources. 【Available stock models】 ■ Pressure-resistant explosion-proof motors, explosion-proof grade d2G4 - Foot-mounted type, output 0.4 to 3.7 kW, 4 poles - Flange type, output 0.4 to 0.75 kW, 4 poles ■ Increased safety explosion-proof motors, explosion-proof grade eG3 - Foot-mounted type, output 0.2 to 0.75 kW, 2 and 4 poles - Flange type, output 0.2 to 0.75 kW, 2 and 4 poles

As part of the "Hometown Ibara Future Creation Human Resource Development Project," we welcomed local elementary and middle school students to the special summer program "Ibara Job Exploration Tour 2025," a collaboration between the Ibara City Chamber of Commerce and the Corporate Branding Committee. We conducted a presentation that clearly and enjoyably introduced how our technology supports society, allowing the children to learn about the appeal of manufacturing and the significance of working while interacting with actual devices and products. Through this initiative, we hope to deepen our connection with the community and nurture the curiosity of the children who will carry the future. We sincerely thank everyone who participated, as well as all those involved in planning and organizing the event.

We will disclose the interim financial results for the fiscal period ending December 2025.