We will exhibit at the 14th COSME Tech 2024, from January 17 to 19, 2024, at Tokyo Big Sight!

With high antioxidant power, it activates cells! It has high permeability, allowing effective ingredients to be absorbed transdermally. Products can be made free of preservatives and surfactants.

The "S-100" is a high-functionality reducing ion water with high efficacy for living organisms. It has won prestigious awards at cosmetic and pharmaceutical exhibitions in Paris, France, and Madrid, Spain. Although it is alkaline, it becomes weakly acidic the moment it touches the skin, so it does not irritate the skin. With a surface tension of only 62 mN/m (at 25°C), it penetrates into fine gaps and removes dirt. 【Features】 ■ High permeability allows for the development of antioxidant and preservative-free cosmetics. ■ Cosmetics can be made using only the active ingredients necessary for the skin. ■ Alkaline bacteria with a pH of 12±0.5 can only survive at a pH below 10.5. ■ The environment can sustain bacterial growth for a long time. ■ Odors can be eliminated by spraying. 【Examples of Use】 ■ Cosmetics ■ Pharmaceuticals ■ Raw materials ■ Consumer cleaners ■ Industrial cleaning solutions *For more details, please download the PDF document or contact us by mentioning "Ipros."

• Organic Natural Materials

Mist spray is also possible. This is a moisture gel that fully utilizes the functions of high-performance reducing ion water.

A gel with enhanced mineral concentration that is permeable and quick-drying. It has high permeability, broad antibacterial and antiviral properties, and preservative effects similar to other raw materials, allowing for the creation of moisturizing beauty gels or emulsions and creams mixed with oils that provide a refreshing feel. It quickly penetrates the skin, offering an unprecedented new sensation. 【Features】 ■ Quickly locks in moisture due to high permeability ■ Gel with a refreshing texture ■ Can be used as a mist spray despite being a gel 【Cosmetic Applications】 ■ Quick-drying hand gel ■ Introduction beauty gel ■ Base material for milk lotions/creams that are free of surfactants, etc. *For more details, please download the PDF document or contact us mentioning "Ipros."

• Chemicals

It is ion water obtained through a unique manufacturing method that has been patented, which generates vibrations that alternate between gel and sol.

"GE-100" is an ionized water that can be sprayed in a gel form without the need for surfactants or preservatives. It is a gel-like reducing ionized water with special thixotropic properties, making it suitable for the development of emulsions and cleansing products that are free from antioxidants, preservatives, and surfactants. Additionally, it allows for easy mixing of various oil ingredients without surfactants, enabling the penetration of active ingredients. [Features] ■ Transforms into a sol (liquid) when vibrated and re-gels in about 10 seconds ■ Can uniformly mix liquids and powders that do not dissolve in water ■ Can be sprayed in gel form ■ No need for the addition of surfactants or preservatives ■ Antibacterial properties equivalent to 70% ethanol *For more details, please refer to the PDF document or feel free to contact us.

• others

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.