【Product Introduction】A comprehensive showcase of our handled products.

Simply install it on the air conditioner filter to reduce unnecessary power consumption. Many successful implementations.

"Continuum" is an electrostatic discharge sheet that maintains a constant negative potential due to the action of special natural minerals. It improves the heat exchange efficiency that decreases due to static electricity issues in air conditioners, thereby reducing the operation of the compressor and recovering the electricity costs of the air conditioner. It can be easily cut with scissors to fit the size of the filter, making it easy to install in various types of air conditioners. It has been implemented in approximately 3,300 business locations, including 250 listed companies. [Features] ■ Simply cut to the required size and install between the dust filter and the heat exchanger ■ Capable of suppressing unnecessary power consumption in various types of air conditioners ■ Made from lightweight and flexible materials. No running costs required ■ Improves previously wasted electricity costs. Reduces environmental impact through energy conservation ■ Adopted in offices, factories, stores and facilities, hospitals and nursing care facilities, and tutoring schools ★ You can view materials featuring numerous case studies by clicking the download button below. Please feel free to contact us with any inquiries regarding the product.

• Other air conditioning equipment

With an IP66 waterproof rating, it can be installed 50 meters away from the main unit! Even in the event of extreme weather, it can be addressed by simply replacing the power supply.

Our original 'ZF series' is a power-separated LED floodlight. By separating the power supply, it can be installed 50 meters away from the main unit. It can be installed in locations protected from sunlight (ultraviolet rays), rain, and saltwater. 【Features】 ■ Highest quality made in Japan Achieved high specifications at a low cost ■ Salt-resistant specifications allow use in salt-damaged areas - Aluminum: 6063 aluminum alloy + salt-resistant coating - Stainless steel: 6063 aluminum alloy + salt-resistant coating / Arm and hinge made of SUS316 stainless steel (Note: The salt-resistant coating is applied with a 100-micron polyester resin powder coating throughout) ■ Standard lightning surge protection of 20kV Prepared for recent abnormal weather conditions ■ IP66 waterproof and dustproof Usable both indoors and outdoors (Note: The power supply part is IP67) ■ PSE certified with a 5-year warranty confidence (Note: There may be exclusions even within the warranty period. Please refer to the catalog for details.) * For more details, please request a catalog or view the PDF data from the download.

• LED Module

Waterproof standard IP66 specification that does not affect ship radio communication.

The Honest Original "V Series" is an LED floodlight that can be used on ships. It is also effective in various locations other than ships (see the applications and achievements below). 【Features】 ■ Completely waterproof, with IP66 rating for waterproofing and dustproofing, and has passed salt spray testing. ■ Compliant with PSE Electrical Appliance and Material Safety Law for safe use. ■ Equipped with a temperature protection circuit that automatically turns off the light if the power supply reaches a maximum temperature of 95°C. ■ Strong salt-resistant specifications, made of 6063 aluminum alloy with salt-resistant coating, and the arm and hinge parts are made of SUS316 stainless steel. ■ Standard lightning surge protection of 20kV, limiting current during lightning strikes for protection. ■ Compliant with EMS/EN61000-4-5, providing preparedness for natural disasters. *For more details, please refer to the PDF materials or feel free to contact us.

• Floodlight

With astonishing waterproof and dustproof performance, it can be used in various places for a variety of purposes!

Our original "Field Light-X" is an integrated LED fluorescent light that requires no electrical work. With an IP67 waterproof rating, it can be used outdoors. Additionally, it can be linked together, making it highly effective on construction sites. 【Features】 ■ IP67 waterproof and dustproof Usable both indoors and outdoors (Note: The cord part is IP63, so please be careful when linking.) ■ Linkable design When using 100V, the 40W model can be linked up to 15 units for a total illumination of 100m, and the 20W model can be linked up to 25 units for a total illumination of 145m. (Note: When using 200V, please ensure not to insert 100V products and manage accordingly.) ■ Impact-resistant, made from the highest strength materials Made of polycarbonate that won't break even if stepped on. ■ 3-year warranty As a Japanese manufacturer, we provide reliable support. (Note: Some cases may not be covered even within the warranty period. Please refer to the catalog for details.) *For more information, please request a catalog or download the PDF data.

• LED Module

High brightness yet saves over 70% in power consumption! This is the environmentally friendly fluorescent light!!!

The "LB819 series" is an LED fluorescent lamp with a built-in power supply and single-side power feeding. ■ Safe Circuit Design - Circuit design that suppresses excessive inrush current during initial lighting - Circuit design that suppresses harmonics - Circuit design with an efficiency rate of over 90% - EMI (electromagnetic interference) suppression circuit design ■ Achieving an LED Lamp Design Life of 40,000 Hours - Main electrolytic capacitors have achieved test results with a design life of over 60,000 hours ■ Other Safety Circuits - Overcurrent and overvoltage protection circuits - Safety short-circuit function circuit ■ Electrolytic Capacitors 1. Achieved a test design life of 65,223 hours (7.447 years) at an operating temperature of 77.8°C 2. Achieved a test design life of 73,882 hours (8.434 years) at an operating temperature of 80.2°C 3. Achieved a test design life of 78,908 hours (9.008 years) at an operating temperature of 79.3°C 【Lineup】 3000K / 5000K / 5700K (Note: 4000K is made to order)

• LED lighting

Since it is flicker-free, you won't be troubled by noise and can use it anywhere.

The ballast-free type is a flicker-free LED. It can be used in various locations such as ships, heavy machinery, studios, and museums. This is our number one popular product, with cumulative sales exceeding 13,000 units. *Please note that this product has polarity. 【Features】 ■ Waterproof rating IP65 Can be used indoors and outdoors due to its waterproof and dustproof design. ■ Flame retardant ■ Major manufacturer The LED chip is made by "Epistar," in collaboration with the Japanese manufacturer Toyota Gosei. ■ Energy-saving The power consumption of LEDs is about 1/8 that of incandescent bulbs. *This bulb is compatible with DC (12/24V). Please be aware that it cannot be used with non-specified power sources (such as household AC 100V).

• LED

Using eco-friendly functional glass, BioGlass!

By simply adding it to the auxiliary tank of the car's radiator, it improves fuel efficiency and reduces harmful exhaust gases. Bioglass weakens the surface tension of the coolant, cools the engine quickly, promotes complete combustion of gasoline, and achieves improved fuel efficiency. 1. Add CAR UP to the auxiliary tank of the radiator. 2. The surface tension of the coolant in contact with the bioglass becomes smaller (weaker). 3. The coolant with reduced surface tension cools the engine quickly. 4. The contact area between the coolant and the engine block increases, enhancing thermal conductivity and cooling effectiveness. Additionally, the friction resistance of the coolant decreases, allowing it to circulate faster and improve cooling efficiency. 5. The engine can be cooled efficiently, allowing more air to enter the cylinders. Following these steps, fuel efficiency increases and harmful exhaust gases are reduced.

• Fuel system parts

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The delivery time for the following models is currently about 4 weeks. - Standard specification model with full scale from 2 mL/min to 500 L/min (M/MB/MC series) - Low pressure loss model with full scale from 2 mL/min to 100 L/min (MW/MWB/MCW series) *Delivery times may vary depending on the type of options, so please inquire. *The delivery time for the controller may vary depending on pressure conditions, so please inquire. The delivery time for other models is approximately 2 to 3 months. For more details, please request a quote or consultation.

Based on practical experience in both support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On August 5, 2025 (Tuesday), they published a page titled "Are Business Talks and Negotiations Determined by 'Preparation'? 'Hot Reading'". 'Hot Reading' involves researching the other party in advance and appearing to know things about them during the conversation to gain their trust. The page explains the benefits of utilizing this technique, the specific process, relatable examples, two types of information for business application, and important points to keep in mind. (Page Overview: Excerpts) ■ What is 'Hot Reading'? ■ Benefits of 'Hot Reading' ■ Relatable examples of 'Hot Reading' ■ Differences from 'Cold Reading' ■ How to utilize it in business scenes: Personal & Public Information Gathering ■ Precautions when using 'Hot Reading' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/hot-reading-2025-08/