Notice of Participation in the 15th [International] Smart Grid Exhibition

Maximum output 12kVA, continuous operating output 9.9kVA three-phase (power) off-grid inverter (patent and utility model acquired)

The iGen.10000IV is a unique three-phase (power) inverter developed by Daishin, born from the development of large inverter generators, with a maximum output of 12kVA and a continuous operating output of 9.9kVA, providing a pure sine wave output. Utilizing the technology and experience gained from inverter generator development, we have obtained various patents and utility models. ■ [Patent] Parallel Operation Method Can be connected in parallel. Easily increases output. ■ [Patent] Inrush Current Support Supports inrush current for motor equipment. Can operate a 5.5kW motor. *This varies depending on the equipment used, so please contact us for details. ■ [Utility Model] Digital Inverter with Special Circuit Incorporates a special circuit with various built-in protection functions. It can be used in combination with solar power generation, storage batteries, V2H systems, etc., to build off-grid environments for three-phase (power) applications and for disaster prevention and BCP measures. *For more details, please refer to the product catalog available for download in PDF format. Feel free to contact us as well.

• Other energy equipment

Easily convert single-phase (lighting) 200V to three-phase (power) 200V.

"I want to introduce a three-phase 200V machine, but the power contract is a hurdle..." For those who have such concerns. ✅ Directly output three-phase 200V from single-phase 200V! ✅ No need for power contracts or electrical work! * Connection work to the distribution board may be required. ✅ Three-phase equipment can be used directly in factories, farms, maintenance shops, temporary sites, and more! Daishin's 'iGen.10000PT' is a single-phase to three-phase converter with a maximum output of 12kVA and a rated output of 9.9kVA. It is equipped with a uniquely developed inverter that has obtained various patents and utility models, allowing for easy conversion of single-phase (lighting) 200V to three-phase (power) 200V. * For more details, please check the product catalog from "PDF Download." Also, feel free to contact us.

• Converters and Transducers

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!