★Techne Measurement★ WEB "Notice of Addition of Page on CRDS Trace Moisture Meter"

It is possible to measure trace oxygen concentrations in the ppt/ppb range in various gases!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide measurement range The HALO OK series covers applications from quality assurance in welding, medical, and industrial uses to gas filling, and is also applicable in other areas such as bulk transport and transfer points. This product is unrelated to the complex and difficult-to-handle technologies of the 20th century, which are costly and labor-intensive. There is no need for calibration or spare parts, and you no longer have to worry about measurement range limitations, drift, or waiting times for measurements. Both startup and operation are easy to perform.

• Other temperature and humidity measuring instruments

It is possible to measure trace moisture in the ppt/ppb range in various gases, as well as trace concentrations of CO, CH4, NH3, and others!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide range of measurements possible in various sample gases The HALO3 series covers quality assurance for welding, medical, industrial applications, and high-purity gas production, as well as cylinder filling, and is also applicable during bulk transport and at relay points. This product is unrelated to the complex and cumbersome technologies of the 20th century that are costly and labor-intensive. There is no need for calibration or spare parts, and you no longer have to worry about measurement range limitations, drift, or waiting times for measurements. Setup and operation can be done easily.

• Other measurement, recording and measuring instruments

It is possible to measure trace moisture in the ppt/ppb/ppm range in various gases, as well as trace concentrations of CO, CO2, NH3, and others!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurement at low flow rates ● Wide measurement range The HALO3 series covers applications from quality assurance during welding, medical, industrial, and high-purity gas production to cylinder filling, and is also applicable for bulk transport and during transfer points. This product is unrelated to the cumbersome, complex, and costly technologies of the 20th century. There is no need for calibration or spare parts, and you no longer have to worry about measurement range limitations, drift, or waiting times for measurements. Both setup and operation can be done easily.

• Other temperature and humidity measuring instruments

It is possible to measure trace amounts of moisture in various gases and trace concentrations of CO, CO2, NH3, etc.!

● Adopts high-performance and proven (CRDS) technology ● No calibration required ● Reduction of lifetime costs ● Capable of high-response measurements at low flow rates ● Wide range of measurements possible in various sample gases ■ The SPARK series covers quality assurance for welding, medical, industrial applications, and high-purity gas production, as well as cylinder filling, and is also applicable for bulk transport and during transfer points. This product is unrelated to the complex and difficult-to-handle technologies of the 20th century, which are costly and labor-intensive. No calibration or spare parts are needed, and there is no need to worry about measurement range limitations, drift, or waiting times for measurements. Startup and operation can be done easily.

• Other measurement, recording and measuring instruments

October 1 (Wed) to October 3 (Fri), 2025 10:00 AM to 5:00 PM @ Makuhari Messe Omnia Concerto Co., Ltd. CO2 localized application controller, environmental integrated control system, remote monitoring control system, tree seedling accelerated cultivation system, year-round shiitake cultivation system, and more We are collaborating on the exhibition. We sincerely look forward to your visit.

We are pleased to announce that our CEO, Mariko Takahashi, has been appointed as an "Entrepreneurship Promotion Ambassador" by the Ministry of Education, Culture, Sports, Science and Technology. This initiative is part of the government's "Five-Year Plan for Startup Development," which is being promoted by the Ministry. The aim is to increase the number of individuals who form the foundation for startup creation and to enhance diversity by providing entrepreneurship education to elementary, middle, and high school students. As ambassadors, they will leverage their experiences and networks to engage in lectures and networking activities at schools and various events across the country. We will contribute to the development of the next generation of talent and the advancement of industry by giving back the knowledge and achievements gained as a startup to society.

Mariko Takahashi, our CEO, will be speaking at the event "New Business Created by Data × Visualization - Startup Co-Creation Session" hosted by Itochu Techno-Solutions Corporation. New Business Created by Data × Visualization - Startup Co-Creation Session Date and Time: September 25, 2025 (Thursday) 15:00 - 18:00 Venue: Kamiyacho Station Area Conference Room (Minato-ku, Tokyo) Participation Fee: Free | Scheduled Startup Companies | NodeX Corporation Quollio Technologies Corporation SIRC Corporation

Original non-woven fabric bag from Matsumoto Machinery. Black with white, easy to use every day. The size is 47cm wide × 36cm high × 8.5cm deep, comfortably fits A3 documents. The president uses it daily for commuting, carrying a laptop, water bottle, folding umbrella, and gym gear. Employees have praised it as "convenient for dry cleaning" and "perfect for travel souvenirs." A red version was also made, but there were comments that it was "too flashy," so production of the black and white version has been increased. It will be distributed at INCHEM TOKYO 2025 (September 17-19 at Tokyo Big Sight). For more details, please follow the link.

We are pleased to announce that we will be exhibiting at the 28th Mechanical Components Technology Exhibition (M-tech) in Osaka. We sincerely look forward to your visit. The Mechanical Components Technology Exhibition is one of the largest manufacturing exhibitions in Japan, part of the "Monozukuri World Osaka." 【Exhibition Overview】 Dates: October 1 to October 3, 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka Exhibition Booth: Hall 6, Zone A / Booth Number 44-21 Additionally, prior registration is required to attend this exhibition. By registering and printing your visitor badge in advance, you can enter smoothly on the day of the event.