We have newly added the product page for 【SANTOOL】 【Collaboration Proposal】 featuring a PUR adhesive that combines flexibility and heat resistance!

Introducing Toyo Chem Co., Ltd.'s new product! PUR adhesive!

While being PUR, it has adhesive properties, demonstrates adhesion under various environmental conditions, and allows for coating with various application patterns. - "PUR adhesive sheet" that has adhesive properties while being PUR - "Heat-resistant PUR-HM adhesive" with high heat and cold resistance - "Functional optical PUR adhesive" usable in various temperature ranges 【Features】 ■ Has flexibility and durability ■ Low melt viscosity ■ Can be applied at low temperatures ■ Reduces damage to materials *For more details, please refer to the related links or feel free to contact us.

• glue

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

• Other mounting machines
• Painting Machine
• spray

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

• Other mounting machines

There are methods for applying with tension between rolls and on-roll application, allowing for continuous/intermittent (partial application) depending on the purpose!

This is a method for applying hot melt adhesive in a uniform width, over a surface, or in stripes. There are methods for applying it under tension between rolls and on-roll application, which can be continuous or intermittent (partial application) depending on the purpose. 【Features】 ■ Coater head for contact-type application ■ The application pattern can be arbitrarily set according to the shim pattern. ■ High-speed intermittent adhesion is possible, accommodating adhesives from high viscosity to low viscosity. ■ Beautiful coating with thin film adhesion. ■ There are measures to prevent winding during application and to address clumping of hot melt adhesives (using hot air). * For more details, please download the PDF or feel free to contact us.

• Painting Machine
• spray
• Other painting machines

Achieve stable precision coating! Line drawing and dot placement pattern formation nozzle.

The "bead nozzle" is a small nozzle suitable for applying thin lines (beads) and dot applications. It is manufactured with high precision, allowing for extremely low variation between nozzles even in multi-line applications, enabling stable coating, which is why it is used in many industrial machines. By bringing the nozzle closer to the substrate, high-cut multi-line intermittent application is also possible. 【Features】 - Ideal for line (bead) and dot patterns, capable of multi-line intermittent application - Achieves stable coating, providing a uniform and beautiful finish - Reduces product waste, improves productivity, and offers cost benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 - Filling - Molding - Filters - Automotive parts - Refrigerators - Building materials - Packaging - Bookbinding

• Other mounting machines
• Painting Machine
• Other painting machines

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of foaming ratio. ■ Unique design by Santool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ Enables surface coating in addition to bead application, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

• Other assembly machines

A touch panel type that allows control of the foaming ratio! Discharge in solid state is also possible.

【Sample Distribution】We are currently distributing application samples. Please check the end of the article for details. The 'CF Series (Foam-Compatible Type)' is a touch panel type melter (applicator). Foam expansion ratios can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foam expansion ratios from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types 【Lineup】 ■ CF08 ■ CF30 ■ CF60 ■ CF120 【Applications/Examples of Achievements】 *For more details, please refer to the PDF materials or feel free to contact us. For a limited time, we will send application samples only to companies that inquire! Please feel free to contact us!

• Painting Machine

Touch panel type that allows control of foaming ratio! Discharge in solid state is also possible.

The "CF Series (Foaming Compatible Type)" is a touch panel type melter (applicator). The foaming ratio can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foaming ratio from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types * For more details, please refer to the PDF materials or feel free to contact us. 【Lineup】 ■ CF08, CF30, CF60, CF120

• Painting Machine

A stable coating method that can be applied non-contact when you want to apply a thin and wide layer for product bonding! Regardless of low or high speed, it achieves minimal splatter and beautiful uniform coating!

The "Spiral Spray" is a method of applying hot melt in a spiral fiberized form onto the substrate. It achieves beautiful spiral application with minimal scattering, regardless of low or high speeds. It is also possible to apply using a foaming machine for foamed spirals. 【Features】 ■ Soft finish with a pleasant texture and breathability ■ Reduces waste/loss of hot melt adhesives ■ Solvent-free/low-solvent for environmental/recycling measures ■ High-speed intermittent adhesion is possible. The spiral can accommodate up to 72,000 rotations per minute, with a width of approximately φ15–20mm. 【Features of the nozzle with secondary air】 ■ The guide air stabilizes the pattern, and the clean air protects the nozzle, significantly reducing maintenance without foreign matter adhesion. ■ Spiral application of high-viscosity hot melts, which was difficult with conventional methods, is now possible. * For more details, please refer to the PDF document or feel free to contact us. 【Applications/Examples of Achievements】 ■ Non-woven fabrics ■ Films ■ Filters

• Painting Machine
• spray
• Other painting machines

This document introduces case studies of problem-solving related to the "dispenser coating equipment" that we handle.

A simple and multifunctional small dispenser allows for the replacement of the head to change various application patterns. 【Features】 ■ Various applications possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Also available for reactive hot melt (DP300P) ■ Compatible with adhesives from high viscosity to low viscosity ■ Widely used for bonding and filling small boxes ■ Systems that can be mounted on robots are also available *For more details, please download the PDF or feel free to contact us. We would like to introduce an example of how various companies have adopted these features.

• Painting Machine
• Other painting machines

Simple and multifunctional, the small dispenser allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings are possible with head replacement - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300) *Options - Aluminum can preheater *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Packaging of small boxes ■ Coating on circuit boards ■ Electronic components

• Other processing machines

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The RNP-45 is a surface mount power film resistor designed to be compatible with the TO-252 package, weighing only 0.33 grams, with a thermal resistance of 3.0°C/W and a rated power of 45W. The resistive element is a pulse-resistant thick film, featuring excellent high-frequency characteristics with a reactance component of 2.7pF and 14.7nH, while also having a pulse power performance of 1kW-1µs despite its small size. The operating temperature range is from -55 °C to +175 °C. Additionally, it incorporates several design features, such as the removal of the metal flange to maximize the thermal performance of the resistor, compatibility with standard reflow SAC solder joints instead of wire bond connections, making it suitable for automatic mounting, an increased resistive element area to enhance surge performance, and the adoption of a 0.8mm substrate to strengthen bending stress.