Many customers have said, "It's cool!" This is from Shimizu Kanamono Co., Ltd., which has adopted the "Thermo Barrier Sky Method."

What is the patented construction method "Sky Method" that is applied from the top of a folded plate roof?

Cuts approximately 97% of "radiant heat from the sun" that cannot be prevented by insulation materials. The "Sky Method" is a patented technique that involves applying a heat-insulating sheet over a corrugated roof. 【Features of the Sky Method】 ■ Indoor temperature in summer decreases by about 11°C (maximum temperature difference based on experimental results) ■ Contributes to savings on air conditioning costs, prevention of product deterioration, and improvement of the working environment ■ Provides stable heat insulation effects regardless of the skill level of workers or weather conditions during installation ■ Effective against rain leaks ■ Uses a strong double-sided tape that does not peel off even in winds of 40m/s ■ Patent obtained (No. 6598337) *For more details, please download the PDF.

• Other air conditioning equipment

Construction under the folded plate roof" | "Folded plate roof (constructed from below the roof)

The radiant heat emitted from the folded plate roof is significantly reduced by the reflection of the radiant heat by the inner thermal barrier S. This results in a lower perceived temperature. A lightweight steel frame is constructed under the folded plate roof, and the thermal barrier S (non-combustible certified product) is installed onto the lightweight steel frame using tapping screws. *Working at heights or the installation of rolling scaffolding is a requirement.

• others

Installation of non-combustible certified Thermo Barrier S on the inner side of the roof in 'Slate Roof Under Construction'

Introducing the construction method "Slate Roof Under Installation" by Life Tech Co., Ltd. for factories and stores. Thermal Barrier S (non-combustible certified product) is installed with tapping screws towards the steel frame's purlins under the slate roof. The thermal barrier S on the inside reflects the radiant heat emitted from the slate, significantly reducing the impact of radiant heat. This results in a lower perceived temperature. 【Features】 ■ The thermal barrier S on the inside reflects the radiant heat emitted from the slate. ■ Significantly reduces the impact of radiant heat. ■ Has the effect of lowering the perceived temperature. ■ There is a difference in the impact of radiant heat between areas with and without thermal barrier S applied. *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

What is a sealed product air leak test device? It is an air leak test device that inspects the airtightness, sealing performance, and waterproofness of electrical equipment and packaging containers (cosmetics, food). It tests for leaks in products such as smartphones, tablet devices, keyless switches, wristwatches, bottle containers, and cosmetic containers (eyeliner, mascara).

【Leak testers and leak test-related products provided by Fukuda】 Please take a look at our catalog! ★ Millimeter-wave radar & LiDAR leak tester: The air leak tester "FL-610" for controlling the separate type leak tester air pressure unit "LPU-300." ★ Leak tester for simultaneous measurement of workpieces: Measures two workpieces with one unit. By comparing two at the same time, you can increase the number of operations. ★ Electric air regulator for blood pressure monitor pressure confirmation: Excellent in repeatability of pressure control and pressure adjustment. ★ Leak tester for automotive lighting: Can be tested at low pressure without affecting the workpiece (item under inspection). ★ Air leak tester conversion box/cable: Peripheral equipment for air leak testers. Used when replacing old models with current products or when changing the model of current products. ★ Waterproof inspection testing device: A device for testing the waterproofness (equivalent to IPX7,8) and sealing of sealed products. It can be used for various products such as electronic devices and packaging containers.