The decisive factors for the introduction were "experiments (presentations)" and "research materials." The number of cooling fans decreased from 7 to 1, and the number of employees with health issues dropped to zero, Igeta-do Co., Ltd.

What is the patented construction method "Sky Method" that is applied from the top of a folded plate roof?

Cuts approximately 97% of "radiant heat from the sun" that cannot be prevented by insulation materials. The "Sky Method" is a patented technique that involves applying a heat-insulating sheet over a corrugated roof. 【Features of the Sky Method】 ■ Indoor temperature in summer decreases by about 11°C (maximum temperature difference based on experimental results) ■ Contributes to savings on air conditioning costs, prevention of product deterioration, and improvement of the working environment ■ Provides stable heat insulation effects regardless of the skill level of workers or weather conditions during installation ■ Effective against rain leaks ■ Uses a strong double-sided tape that does not peel off even in winds of 40m/s ■ Patent obtained (No. 6598337) *For more details, please download the PDF.

• Other air conditioning equipment

Construction under the folded plate roof" | "Folded plate roof (constructed from below the roof)

The radiant heat emitted from the folded plate roof is significantly reduced by the reflection of the radiant heat by the inner thermal barrier S. This results in a lower perceived temperature. A lightweight steel frame is constructed under the folded plate roof, and the thermal barrier S (non-combustible certified product) is installed onto the lightweight steel frame using tapping screws. *Working at heights or the installation of rolling scaffolding is a requirement.

• others

Installation of non-combustible certified Thermo Barrier S on the inner side of the roof in 'Slate Roof Under Construction'

Introducing the construction method "Slate Roof Under Installation" by Life Tech Co., Ltd. for factories and stores. Thermal Barrier S (non-combustible certified product) is installed with tapping screws towards the steel frame's purlins under the slate roof. The thermal barrier S on the inside reflects the radiant heat emitted from the slate, significantly reducing the impact of radiant heat. This results in a lower perceived temperature. 【Features】 ■ The thermal barrier S on the inside reflects the radiant heat emitted from the slate. ■ Significantly reduces the impact of radiant heat. ■ Has the effect of lowering the perceived temperature. ■ There is a difference in the impact of radiant heat between areas with and without thermal barrier S applied. *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The Hyper CLT flooring board is a wooden flooring board that utilizes CLT developed by KAITAKU Co., Ltd. It was developed as a new CLT flooring board to replace conventional steel plates, with an eye toward use in temporary roads, access roads, and construction sites. In addition to its functionality as temporary material, it is also gaining attention for its lightweight nature and environmental considerations. One of its significant features is the improvement in transportation efficiency due to its lightweight. Conventional flooring boards and steel plates are heavy, making transportation and handling costly and labor-intensive, while the Hyper CLT flooring board is expected to reduce the burden during transport, ultimately leading to lower transportation costs. The use of CLT in the civil engineering field is still relatively rare, which makes it easier to differentiate and enhances proposal capabilities on-site. Including its soft impression as a wooden flooring board and consideration for the landscape, it is recommended for those considering the development of temporary roads and access roads, as well as those looking for lightweight and transportation-efficient temporary materials. For inquiries about the details and sales of the Hyper CLT flooring board, or to request product materials, please feel free to contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Merchandise for fans has evolved primarily through the combination of "design" and "materials." The beauty of illustrations, printing techniques, and the choice of materials such as acrylic, metal, and fabric have significantly enhanced the appeal of these products. However, the impression we get when we see merchandise is not solely influenced by design and materials. The feelings we experience, such as "beautiful," "eye-catching," or "photogenic," are greatly affected by how light reflects, transmits, and disperses. For example, have you ever had the experience of seeing the room's lighting reflected when displaying an acrylic stand? Or when taking a photo with your smartphone, noticing a flare (a whitish blur) on your favorite character's face, or seeing colors that look different from their true hues? This is not necessarily due to poor design or printing, but rather because the behavior of light has not been adequately controlled. ◆ Merchandise for fans is moving to the next phase of evolution ◆ Merchandise for fans can be transformed significantly with "light" ◆ Proposal: Merchandise for fans that "selects only the favorite" using bandpass filters ◆ Co-creation proposal: Shall we shape the next standard with Adachi New Industry?