I felt the high effectiveness and immediately recommended it to acquaintances." | Ikeda Kogyo Co., Ltd., which introduced the "Thermo Barrier Sky Method.

What is the patented construction method "Sky Method" that is applied from the top of a folded plate roof?

Cuts approximately 97% of "radiant heat from the sun" that cannot be prevented by insulation materials. The "Sky Method" is a patented technique that involves applying a heat-insulating sheet over a corrugated roof. 【Features of the Sky Method】 ■ Indoor temperature in summer decreases by about 11°C (maximum temperature difference based on experimental results) ■ Contributes to savings on air conditioning costs, prevention of product deterioration, and improvement of the working environment ■ Provides stable heat insulation effects regardless of the skill level of workers or weather conditions during installation ■ Effective against rain leaks ■ Uses a strong double-sided tape that does not peel off even in winds of 40m/s ■ Patent obtained (No. 6598337) *For more details, please download the PDF.

• Other air conditioning equipment

Difference between insulation materials and heat shielding materials: conductive heat, convective heat, and radiant heat.

Measures to reduce the temperature rise in buildings during summer are urgently needed. In this situation, heat insulation materials that can replace traditional insulation are gaining attention. What exactly are these heat insulation materials? Let me explain heat insulation in an easy-to-understand manner. About the heat insulation sheet "Thermo Barrier" that reflects 97% of radiant heat "Thermo Barrier" is a special sheet that reflects radiant heat with an "aluminum foil" coating. By adding this product to insulation materials, it reflects the radiant heat from the summer sun and helps to reduce the temperature rise of insulation materials and buildings. In winter, it works to prevent the heat from heating appliances from being released outdoors, reducing cold at the feet. With the dual effects of summer and winter, it achieves ideal insulation properties and reflects heat that traditional insulation cannot stop. 【Features】 ■ Coated with "aluminum foil" to reflect radiant heat ■ Has a high reflectivity with aluminum purity of over 99% ■ Reflects 97% of radiant heat such as far-infrared rays ■ Achieves ideal insulation properties with the dual effects of summer and winter For more details, please contact us or download the catalog.

• others

Installation of non-combustible certified Thermo Barrier S on the inner side of the roof in 'Slate Roof Under Construction'

Introducing the construction method "Slate Roof Under Installation" by Life Tech Co., Ltd. for factories and stores. Thermal Barrier S (non-combustible certified product) is installed with tapping screws towards the steel frame's purlins under the slate roof. The thermal barrier S on the inside reflects the radiant heat emitted from the slate, significantly reducing the impact of radiant heat. This results in a lower perceived temperature. 【Features】 ■ The thermal barrier S on the inside reflects the radiant heat emitted from the slate. ■ Significantly reduces the impact of radiant heat. ■ Has the effect of lowering the perceived temperature. ■ There is a difference in the impact of radiant heat between areas with and without thermal barrier S applied. *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This will provide a clear explanation from the basic comparison of CVD and PVD, to the applications of flow meters and pressure gauges, and further to the digitalization of process control and actual application examples. In today's society, where miniaturization and high performance are advancing, products around us, including mobile phones, are equipped with technologies that were once unimaginable. Supporting this evolution is thin film technology, which is utilized in various fields. **Main application areas of thin film technology:** - Microelectronics - Anti-reflective coatings for glass - Antibacterial metal coatings for medical devices - Flexible solar cells, etc. Thin film technology refers to the process of forming, coating, and processing thin film materials on objects referred to as substrate surfaces. In addition to a basic explanation of thin film technology, we will introduce a comparison of CVD and PVD, how to utilize flow meters and pressure gauges, and the benefits of digitalization in process control along with application examples. Please take a look at the related catalog. ★ Additionally, we are offering free materials on detailed explanations of CVD and PVD, as well as basic knowledge related to coatings for the glass industry. https://mono.ipros.com/news/detail/128269/

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.