Introducing "Thermo Barrier" at a model factory for energy-saving measures! Suzuki Corporation's Iwata Factory has experienced improved air conditioning efficiency and noticeable enhancements in work efficiency.

What is the patented construction method "Sky Method" that is applied from the top of a folded plate roof?

Cuts approximately 97% of "radiant heat from the sun" that cannot be prevented by insulation materials. The "Sky Method" is a patented technique that involves applying a heat-insulating sheet over a corrugated roof. 【Features of the Sky Method】 ■ Indoor temperature in summer decreases by about 11°C (maximum temperature difference based on experimental results) ■ Contributes to savings on air conditioning costs, prevention of product deterioration, and improvement of the working environment ■ Provides stable heat insulation effects regardless of the skill level of workers or weather conditions during installation ■ Effective against rain leaks ■ Uses a strong double-sided tape that does not peel off even in winds of 40m/s ■ Patent obtained (No. 6598337) *For more details, please download the PDF.

• Other air conditioning equipment

I will explain the principles of heat, such as why the shade of a flat roof is hot and why the shade of a tree is cool!

Why is it that the shade of a corrugated roof is hot while the shade of a tree is cool, even though the wind passes through and the temperature remains the same? The answer is "radiant heat." Radiant heat refers to electromagnetic waves such as far-infrared radiation. When you have a campfire in a drum can, your body warms up even though the wind is blowing. In this way, radiant heat moves from the hotter object (the drum can) to the cooler object (the human body), transferring heat regardless of the air temperature. [Reasons why the shade of a corrugated roof is hot] - Temperature in summer: 70°C to 80°C - Skin temperature of the human body: about 32°C to 33°C - Radiant heat from the corrugated roof is directed towards the human body - Even in the same shade, the perceived temperature can vary greatly due to the presence or absence of radiant heat *For more details, please refer to the PDF document or feel free to contact us.

• others

Difference between insulation materials and heat shielding materials: conductive heat, convective heat, and radiant heat.

Measures to reduce the temperature rise in buildings during summer are urgently needed. In this situation, heat insulation materials that can replace traditional insulation are gaining attention. What exactly are these heat insulation materials? Let me explain heat insulation in an easy-to-understand manner. About the heat insulation sheet "Thermo Barrier" that reflects 97% of radiant heat "Thermo Barrier" is a special sheet that reflects radiant heat with an "aluminum foil" coating. By adding this product to insulation materials, it reflects the radiant heat from the summer sun and helps to reduce the temperature rise of insulation materials and buildings. In winter, it works to prevent the heat from heating appliances from being released outdoors, reducing cold at the feet. With the dual effects of summer and winter, it achieves ideal insulation properties and reflects heat that traditional insulation cannot stop. 【Features】 ■ Coated with "aluminum foil" to reflect radiant heat ■ Has a high reflectivity with aluminum purity of over 99% ■ Reflects 97% of radiant heat such as far-infrared rays ■ Achieves ideal insulation properties with the dual effects of summer and winter For more details, please contact us or download the catalog.

• others

We have a large number of construction achievements!

We have numerous construction achievements using the Thermo Barrier "Sky Method." ▼We have introduced many examples on our company website. https://www.e-lifetech.com/works/f_sky/

• others

Installation of non-combustible certified Thermo Barrier S on the inner side of the roof in 'Slate Roof Under Construction'

Introducing the construction method "Slate Roof Under Installation" by Life Tech Co., Ltd. for factories and stores. Thermal Barrier S (non-combustible certified product) is installed with tapping screws towards the steel frame's purlins under the slate roof. The thermal barrier S on the inside reflects the radiant heat emitted from the slate, significantly reducing the impact of radiant heat. This results in a lower perceived temperature. 【Features】 ■ The thermal barrier S on the inside reflects the radiant heat emitted from the slate. ■ Significantly reduces the impact of radiant heat. ■ Has the effect of lowering the perceived temperature. ■ There is a difference in the impact of radiant heat between areas with and without thermal barrier S applied. *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.