Product Information: Premier RPA Stress Relief Test

Rheometer "RPA"! A multifunctional testing machine for rubber that quickly determines various testing conditions such as dispersion, molding, and foaming!

"Premier RPA" is a multifunctional testing machine for rubber rheometers. It is a rubber processing analysis device that can be utilized for yield improvement and feedback into processes. It allows for the use of data from trial and error in prototypes, contributing to the reduction of waste in time, materials, and more. With control over strain, frequency, and temperature, various evaluations can be conducted with a single unit, aiding in cost reduction, testing efficiency, and productivity improvement. The "RPA Sub-Zero" can perform low-temperature tests down to -25°C without using liquid nitrogen. Additionally, the resin rheometer "PREMIER ESR" can measure epoxy resins, thermosetting resins, thermoplastics, and more, regardless of sample shape. [Features] - Sweep testing function (capable of evaluating strain, temperature, and frequency with one unit) - Aids in cost reduction, testing efficiency, and productivity improvement - Stress relaxation tests can be performed on a single sample before and after curing, as well as under other testing conditions - Utilized for yield improvement and feedback into processes - Contributes to the reduction of waste in time, materials, etc., by utilizing data from trial and error in prototypes *For more details, please refer to the PDF materials or feel free to contact us.

• Other analyses

Global standard Mooney viscometer

The "Premier MV" is a Mooney viscometer equipped with a patented rotor insertion detection sensor. It complies with ASTM (D1646 & D3346). It features a quick reach to the set temperature and a fast stabilization time. It also includes a patented function for maintaining die balance, known as dynamic symmetry. 【Features】 ■ Complies with ASTM (D1646 & D3346) ■ Quick reach to the set temperature and fast stabilization time ■ Equipped with a rotor insertion detection sensor (patented) ■ Dynamic symmetry (function to maintain die balance: patented) ■ Smart crosshead alignment (function to maintain die sealing: patented) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

A world leader in vulcanization testing machines that provides high reproducibility, high repeatability, and high sensitivity in test results.

The "Premier MDR" is a vulcanization testing machine that detects formulation errors and mixing mistakes while simultaneously measuring foaming pressure. It can be utilized for feedback into the process, contributing to the reduction of time and material waste. It is a world leader that provides high reproducibility, high repeatability, and high sensitivity in test results. 【Features】 ■ Detects formulation errors and mixing mistakes ■ Utilized for feedback into the process ■ Contributes to the reduction of time and material waste ■ Simultaneously measures foaming pressure *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

"Tissue Tubes" are tubes with a capacity of 3.0ml and a rack lid locking feature. Each tube has a 2D code on the bottom, allowing you to use a 2D scanner to reflect the code in a PC database, enabling efficient management of sample information. Additionally, by using our dedicated rack that holds 24 tubes, you can read the 2D codes on the bottom of the tubes in bulk. 【Features】 - The inner diameter at the mouth is wide at 13.4mm, the height is low at 25.9mm, and the inner bottom is flat, making it easy to insert and remove samples. - Particularly suitable for samples of tissue pieces/cell pieces ranging from 5mm to 7mm. - Using our dedicated rack that holds 24 tubes allows for bulk reading of the 2D codes on the bottom of the tubes. - Compatible with automatic machines due to its SBS format. *For more details, please download the PDF or feel free to contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.