EMC/Wireless Standards and Regulations Related News 2024#3

One-stop service for on-site measurements, requests, and compliance with radio laws in various countries.

UL Solutions supports a wide range of products, from IT/AV equipment to wireless devices, automotive/construction machinery, and medical devices. Our specialists, based on proven results and experience, provide meticulous support not only for testing but also for certification acquisition. 【Features】 - Wide range of products supported, from IT/AV equipment to wireless devices, automotive/construction machinery, and medical devices - Support for both testing and certification acquisition - Testing laboratory operates based on the ISO/IEC 17025 standard - Support for overseas expansion 【Benefits of Using UL Solutions】 The UL Solutions EMC testing laboratory is accredited by the U.S. NVLAP, the Japan Accreditation Board (JAB), and A2LA, based on the operational standard ISO/IEC 17025. We meet various requests for a wide range of products, from IT/AV equipment to wireless devices, automotive/construction machinery, and medical devices, including compliance with general EMC standards and radio wave regulations in various countries. Specialists with iNARTE (EMC technical qualification) provide meticulous support tailored to each customer's needs. *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing

We provide certification services and authorization acquisition agency services related to radio wave laws in countries around the world. We reduce the time, cost, and effort involved in regulatory compliance.

This page introduces the "Global Market Access Services" aimed at obtaining radio, safety, and EMC certifications for electrical/electronic products in various countries. When shipping products to global markets, it is essential to understand and comply with the requirements applicable in each region. However, due to the rapid technological innovations in electrical/electronic devices and changes in regulations in various countries, the regulations, standards, and certification systems imposed at the time of market entry are constantly evolving. UL Solutions provides a one-stop service for the necessary testing and certification required in those countries and regions, regardless of where our customers plan to expand, through our certification acquisition services covering radio, EMC (electromagnetic compatibility), and product safety. We support the reduction of time, cost, and effort involved in the global deployment of products. [Contents] ■ Process for obtaining certifications in various countries ■ Radio law application services in various countries ・Radio law certification in Japan ・Technical standards conformity certification and design certification under Japan's Telecommunications Business Act, etc. ■ Basic information based on the radio laws of major countries *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will jointly exhibit a booth with Ronsir Co., Ltd. at the "Hokkaido Energy Technology Innovation EXPO 2025," which will be held at Access Sapporo (Hokkaido) from October 8 (Wednesday) to October 9 (Thursday), 2025. Due to recent extreme heat, heat mitigation measures are also being sought in Hokkaido. At this exhibition, we will introduce heat mitigation strategies for buildings and outdoor equipment using SPACECOOL, along with actual implementation examples in Hokkaido, in collaboration with Ronsir Co., Ltd. Main Exhibition Content SPACECOOL Co., Ltd. - Explanation of SPACECOOL technology and introduction of actual implementation examples - Samples of SPACECOOL products (films, magnetic sheets, membrane materials, etc.) Ronsir Co., Ltd.: Innovation Proof RR - Actual model and implementation examples of the SPACECOOL integrated waterproof sheet "Innovation Proof RR" - Temperature sensation device for Innovation Proof RR Exhibition Overview Dates: October 8 (Wednesday) to October 9 (Thursday), 2025, 10:00 AM to 4:00 PM Venue: Hokkaido, Access Sapporo Our booth number: 405 (2 booths) *Advance registration is required for attendance (free).