[Event] Technical Consultation Meeting on Safety Evaluation of Laser Light Emission

Technology and achievements that support advanced laser products.

UL provides conformity assessment services for laser product safety requirements in accordance with IEC 60825 and the U.S. FDA (CDRH) based on years of diverse evaluation experience with laser products. This allows manufacturers to verify that their products meet laser-related safety requirements as they enter the global market and obtain the technical documentation to support this. We encourage you to consider utilizing UL's laser product safety evaluation services. ■ IEC 60825 Evaluation UL is accredited as a CB testing laboratory for the international standard on laser safety, IEC 60825-1/-2. <Services Offered> - Determination of laser class for laser products - Safety evaluation of laser products ■ Support for U.S. FDA CDRH Laser Product Report Preparation Manufacturers selling laser products in the U.S. market are obligated to comply with FDA requirements and submit a Laser Product Report (and other required reports) to CDRH under U.S. federal regulations. <Services Offered> - Verification of FDA requirement compliance for laser products and preparation of CDRH Laser Product Report.

• Public Testing/Laboratory

What are the requirements for the photobiological safety of products equipped with LEDs? We answer questions like this!

This booklet answers questions regarding the safety of LED radiation in a Q&A format. What are the requirements for the photobiological safety of products equipped with LEDs? How is the potential hazard of LED radiation from products expressed? How are the risk groups for LED radiation determined? These topics are covered. [Excerpt of Contents] ■ What are the requirements for the photobiological safety of products equipped with LEDs? ■ How is the potential hazard of LED radiation from products expressed? ■ Can radiation from lamps other than LEDs also be evaluated for photobiological safety? ■ How are the risk groups for LED radiation determined? *For more details, please refer to the PDF document or feel free to contact us.

• LED Module

How is the class of a laser determined? We are answering questions like this!

This booklet answers questions about laser safety in a Q&A format. It includes topics such as what the safety requirements for laser products are, how the class of a laser is determined, and how to know if the laser radiation emitted from a product is hazardous. Additionally, the classification of lasers is explained clearly using tables. 【Contents (excerpt)】 ■ What are the safety requirements for laser products? ■ How is the potential hazard of lasers from products represented? ■ How is the class of a laser determined? ■ How can we know if the laser radiation emitted from a product is dangerous? *For more details, please refer to the PDF document or feel free to contact us.

• others

UL Verified Mark - You can promote the safety of light radiation.

Laser and LED technologies are applied in various fields such as information technology, healthcare, entertainment, and the automotive industry. With the increase in products, manufacturers are pressured to differentiate their products in the market. On the other hand, for consumers, the incorporation of lasers and LEDs into more familiar products has made safety assurance an important factor in product selection. In this era, UL's Verified Mark is the optimal program to appeal to buyers regarding the safety of laser/LED light emission levels in products. Why is verification necessary? The UL Verified Mark program for laser/LED products is a third-party verification service aimed at verifying the emission levels of lasers/LEDs at reliable testing laboratories and utilizing the results in your marketing activities. By using it alongside UL's well-recognized safety evaluation services in the United States, it alleviates concerns for users and retailers while promoting brand transparency in the market. Products that measure laser/LED emission levels are categorized into three groups under this unique UL program.

• Public Testing/Laboratory

We will provide a clear explanation of the regulations and safety standards that manufacturers must adhere to when importing and selling laser-equipped products in the United States.

In the United States, there are safety regulations regarding radiation exposure for products equipped with lasers. Manufacturers must ensure compliance with safety standards and complete the necessary procedures with the authorities when importing and selling laser products in the U.S. This seminar will explain the safety standards required and the procedures to be followed with the authorities when launching products in the U.S. market.

• Contract measurement

Technology and achievements related to LED products.

■IEC 62471 Evaluation UL is accredited as a CB testing laboratory for the international standard IEC 62471 concerning the photobiological safety of LEDs and lamps. We offer the following services based on the requests of manufacturers. <IEC 62471 Risk Group Determination for LEDs / Lamps> - We measure the spectral irradiance and spectral radiance of LEDs / lamps to determine the risk group for various hazards. - Deliverable: IEC 62471 evaluation report (using IECEE Official Test Report Form) - Accurately understanding the risk group of the radiation that can be exposed from the installed LEDs / lamps and the product is the first step in ensuring the safety of products equipped with LEDs / lamps.

• Public Testing/Laboratory

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.

In the operation of drawings, do you face challenges such as "taking too long to find," "uncertainty about whether it's the latest version," or "high likelihood of confirmation errors"? By utilizing CADSUPER's barcode function (optional), you can reliably connect drawings and information, allowing for a smooth advancement of DX in drawing utilization. In this seminar, we will introduce how using barcodes can change: - Drawing management and search - Confirmation and cross-checking tasks - Information collaboration with the field This content is recommended not only for existing users but also for those considering improving the efficiency of drawing operations and reducing errors.

Daitō Shikō Co., Ltd. will be exhibiting at the "International Fire and Disaster Prevention Exhibition" held at Shirakawa Park in Nagoya City, Aichi Prefecture, from Thursday, May 28, 2026. At the exhibition venue, we plan to showcase goods that are perfect for fire prevention events and recruitment activities for members. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

[Speaker] Miho Ko Shimada, Partner Attorney, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] The movement towards the implementation of CCS, which is positioned as an essential technology for decarbonizing hard-to-abate industries, is gaining momentum in Japan. Among the "advanced CCS projects" selected for business commencement in the early 2030s, some pipeline projects have progressed to the exploratory drilling stage. For shipping transport projects, discussions are underway to create mechanisms for clustering CO2 sources and improving shipping transport efficiency. In this seminar, following the full enforcement of the CCS Business Act on May 22, we will organize the current state of the business environment related to CCS and examine the latest discussions at the Agency for Natural Resources and Energy and the Ministry of the Environment (based on information available at the time of the event) from a legal perspective as we consider the shape of CCS projects leading to Final Investment Decision (FID). [Lecture Items] 1. Current state of the business environment related to CCS 2. Overview of the CCS Business Act 3. Overview of the cost difference support system for CCS projects (pipelines) 4. Structural considerations through the CCS value chain 5. Q&A / Business card exchange