Measures against dryness in winter!

Even the smallest model has a humidification capacity of 9L/h! Compact design that integrates the tank and pump.

The "CUBE" is the smallest model in the moisture mist series, capable of covering large spaces from 100m² to 600m² with just one unit. The overwhelming spray volume made possible by the spray type allows for humidification of large spaces, and the mist emitted from the CUBE contains a large number of negative ions. (Verified by the Environmental Ion Measurement Center) By using a built-in plunger pump to pressurize water at 6MPa and ejecting it through a nozzle with a diameter of 0.1mm, it generates fine mist with an average particle size of 20μm. 【Features】 ■ Power supply: 100V ■ No installation work required ■ Easy to move with wheels ■ Tank compatible with commercially available options ■ Simple operation for power ON/OFF *For more details, please refer to the PDF document or feel free to contact us.

• Humidification device

A simple appearance inspired by OA machines! "I just want to increase the humidity," we solve that problem!

The "MM3 CUBE" is a commercial humidifier developed by improving a moisture mist originally designed for outdoor use, based on valuable feedback received from customers. The operation of this product, which is focused on humidification, is very simple, requiring only the ON/OFF switch. Its simple appearance, inspired by office equipment, blends seamlessly into a wide range of environments such as offices, public facilities, and nursing homes. 【Features】 ■ Basic operation is only the ON/OFF switch ■ Spray adjustment angle is 60 degrees (manual) ■ Spray water volume can be adjusted with a plug ■ 20L tank is compatible with commercially available options ■ Easy to move with wheels ■ Power supply is AC100V *For more details, please refer to the PDF document or feel free to contact us.

• Humidification device

Moisture Mist Mini

Spray volume: 18L/h ・ Air volume: 588m³/h at 50Hz ・ 702m³/h at 60Hz (AC100V) Effective range guideline: Cooling distance 15m × width 4m (outdoors in no wind conditions) With a silencer, it operates at approximately 50dB of quietness. The definitive solution for indoor and outdoor cooling, humidification, and pollen countermeasures. Utilizing a uniquely developed spray nozzle, the moisture mist can be used regardless of location or season for cooling, humidification, pollen prevention, and static electricity prevention. One Moisture Mist Mini unit was effective in humidifying an entire floor (800m²) during indoor experiments in winter without wetting the hallway.

• Other environmental equipment
• air conditioning
• Static electricity eliminator

Large-scale space humidification and prevention of static electricity, measures against dryness in winter.

The dry mist system (fine mist cooling system) has been developed as a large-scale model and is now widely adopted. It has been used for various applications such as heat island countermeasures, heatstroke prevention, cooling work areas in factories, large-scale humidification within factories, and reducing the load on cooling equipment.

• air conditioning

A versatile compact model! Can be used as a cooling device in summer and as a commercial humidifier in winter.

The "MM6-FS," although a compact model, can deliver airflow up to about 15 meters in still conditions, with an effective outdoor cooling range of 60m² (15m x 4m). When used in a sealed space, it can serve as a commercial humidifier capable of humidifying large areas. Additionally, due to its excellent evaporation efficiency, it can effectively humidify without wetting the floors or walls by managing humidity levels. 【Features】 ■ Can deliver airflow up to about 15 meters in still conditions ■ Effective outdoor cooling range is 60m² (15m x 4m) ■ Proven capability to raise humidity from about 30% to 50% in a hospital floor of approximately 800m² ■ Effective humidification range can extend to 1000m² ■ Can solve humidification for large spaces with just one unit *For more details, please refer to the PDF document or feel free to contact us.

• Humidification device

Features: ●Core 3 N355/N150 ●DDR5 SODIMM x 1 (up to 16GB) ●HDMI 1.4, VGA, LVDS ●2.5GbE x 3, SATA 6Gb/s, GPIO 8-bit ●USB 3.2 Gen 2 x 2, RS-232/422/485 x 2, RS-232 x 2 ●Mini PCIe x 1, M.2 2230 E-Key x 1, M.2 3052 B-Key x 1 ●DC input 9V～36V

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, DP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x 1, M.2 2230 E-Key x 1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Our company will be exhibiting at the "28th IoT & Edge Computing Expo [Spring]" within Japan IT Week, which will be held at Tokyo Big Sight from April 8 (Wednesday) to April 10 (Friday), 2026! We will showcase an AI compact edge PC equipped with NVIDIA's Jetson Thor, boards and PCs featuring Intel's Panther Lake and Bartlett Lake, a vending machine-type demo using ARM boards, as well as touch panel PCs, tablet PCs, and other peripheral devices. ■ Dates: April 8 (Wednesday) - April 10 (Friday), 2026 ■ Hours: 10:00 AM - 6:00 PM (until 5:00 PM on the final day) ■ Venue: Tokyo Big Sight, West Hall 3 ■ Booth Location: W22-22 You can register for your visit at the URL below. We sincerely look forward to your attendance. https://www.japan-it.jp/spring/ja-jp/register.html?code=1606569853287533-WSW

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)