[First-time Special Campaign] Would you like to quantify flavors?

It is possible to quantify the target compound in the ppt order without creating a calibration curve using the compound library within the device.

In this instance, we will introduce a case where the new efficacy testing method established by the Fragrance Deodorant Association was implemented using SIFT-MS to verify the deodorizing effect of commercially available deodorizing beads. 【Analysis Sample】 Deodorizing beads 【Analysis Device】 SIFT-MS: Voice 200 ultra by Syft Technologies 【Analysis Method】 In this case, deodorizing beads and the specific foul odor substance Trimethylamine (TMA) were added to a 10L Tedlar bag filled with clean air. The TMA concentration in the sampled air was measured using SIFT-MS at regular intervals, and the time required to remove 90% of the foul odor substance (t0.1) was calculated. 【Analysis Results】 The results of measuring the TMA concentration in the Tedlar bag at each time point up to 6 hours after the start of the test are shown. The logarithm of the TMA concentration (C) / initial TMA concentration (C0) was plotted against time, and the time required to remove 90% of TMA (t0.1) was calculated based on the obtained slope (-0.3956). As a result, the time required for the deodorizing beads to remove 90% of TMA (t0.1) was found to be 5.82 hours.

• Contract measurement

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The sheets used at construction sites require various considerations, including strength, workability, transportability, work burden, and safety. What we have developed is the Hyper CLT sheet (NETIS number: TH-250021-A). The Hyper CLT sheet is not just aimed at being a new "wooden sheet." What we value is that it can truly be used on-site and that we can make proposals based on evidence rather than intuition. To achieve this, we have focused on the feedback and usability obtained from actual construction sites while advancing the acquisition and verification of various data through collaboration with universities. Points that may be difficult to see in solo corporate development have been organized from a more objective perspective by incorporating university expertise, which has been reflected in product development. It needs to be evaluated comprehensively, considering weight, maneuverability, burden during installation, consideration for the surrounding environment, and ease of introduction. In this context, the Hyper CLT sheet (NETIS number: TH-250021-A) expands possibilities as a new option based on practical insights gained on-site and data support through collaboration with universities.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.