We will sponsor the Asuka Conference 2024 as a silver sponsor.

A new material utilizing local thinned wood and bamboo, 【MORIFx】, will be released in 2025.

Introduction of a new material that can be used as a new outlet for thinned wood and harvested bamboo. Please send us thinned wood and bamboo stems from your local area in a chipped state. Using our special technology, we will produce a new material, MORIFx, by mixing it with rubber. It excels in heat resistance, water resistance, and weather resistance compared to natural and synthetic leather. 【Features】 - A unique texture similar to suede, completely different from conventional industrial rubber - Achieves 85% non-petroleum-derived material without using animal-based materials - Superior in terms of animal welfare compared to natural leather and environmental impact compared to synthetic leather - As it is rubber, it excels in heat resistance, water resistance, and weather resistance compared to both natural and synthetic leather - Provides a soothing effect with the natural scent of wood due to the use of wood powder - A rich variety of colors (with plans to increase in the future) *For more details, please download the PDF document or contact us by mentioning "Ipros."

• Wood products

[Wood Powder Sales] Commissioned manufacturing of grinding operations involving drying and crushing at our factory.

We sell 100% domestically produced wood powder. 【Wood Powder Particle Size】 ■Average particle diameter: 500μm ■Average particle diameter: 250μm ■Average particle diameter: 75μm 【Minimum Order Quantity】 ■From 30kg 【Commission Amount】 ■From 5,000 yen/kg *For more details, please download the PDF document or contact us mentioning "Ipros."

• Wood products

Wood powder / Sustainable 100% natural material! One-fourth of Japan's land area consists of unused timber, effective utilization of thinned wood and wood scraps.

We sell wood powder. By mixing it with other materials as a filler for plastic products or as a molding material, it is possible to impart the properties of wood, such as antibacterial effects and moisture resistance.

• Wood products

Patented in 5 countries worldwide! Sustainable raw materials! The antibacterial and antiviral effects inherent in lacquer have been scientifically verified and proven.

URCYL/Arcil" is a biomass molding material made from finely crushed wood powder of cedar and cypress, and tree sap harvested from the lacquer tree. It has physical strength comparable to ABS resin, and as a highly heat-resistant material, it possesses both antibacterial and antiviral properties, making it suitable for various applications. The amount of carbon dioxide generated in the production of this product is about 1/5 that of plastic, contributing to the reduction of greenhouse gases. 【Features】 ■ New material from plant resources ■ Sustainable raw materials ■ Antibacterial and antiviral properties *For more details, please download the PDF or contact us by mentioning "Ipros.

• Organic Natural Materials

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."