Consider what can be done for energy conservation.

Manual ignition using materials like paper, and automatic ignition methods are possible depending on the fuel! It is also equipped with a backfire prevention device.

We would like to introduce our "Small Continuous Flow Wood Biomass Steam Boiler." It can use fresh chips as fuel, and ignition is done manually using paper and other materials without any fossil fuels. An automatic ignition method is also possible depending on the fuel. Additionally, it measures many parameters such as combustion temperature and exhaust gas oxygen concentration, allowing for precise control of fuel feed and combustion air volume to maintain optimal combustion conditions at all times. 【Features】 ■ Can use fresh chips as fuel ■ Ignition does not use any fossil fuels ■ Control technology that maintains optimal combustion conditions ■ Continuous control method according to load ■ No special qualifications or inspections required for small boilers *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Can burn continuously for over 4 hours on a single fuel load! Sturdy type designed for Europe.

"Novatronic" is a wood biomass boiler (wood-fired) capable of continuous combustion for over 4 hours on a single fuel load. It features optimal combustion through a control method called "Lambda control," which burns with an excess air ratio. It is equipped with an "automatic flue cleaning mechanism." It can be used in bathhouses, public baths, hotels, and more. It is a sturdy model designed for European specifications. 【Features】 ■ Optimal combustion through the control method "Lambda control" with an excess air ratio ■ Continuous combustion for over 4 hours on a single fuel load ■ Equipped with an automatic flue cleaning mechanism ■ Sturdy model designed for European specifications ■ Rated output: 40–80 kW *For more details, please refer to the PDF document or feel free to contact us.

• others

No qualifications or licenses required! A lineup of low moisture content fuel dedicated types available!

The "UTSK/UTSP/UTSL" is a wood biomass boiler that does not require any qualifications or licenses. The "UTSK・UTSP," designed for low moisture content fuel, is equipped with an automatic ignition device. It achieves low-cost high performance through a bottom-fed combustion method. The "UTSL," with its compact appearance and sophisticated style, can burn both dry chips and pellets, enabling simple maintenance. It also comes standard with a weekly timer control. 【Features】 <UTSK・UTSP> ■ Designed for low moisture content fuel ■ Equipped with an automatic ignition device ■ Low-cost high performance with bottom-fed combustion method ■ Capable of supporting a maximum output of 2000kW (UTSK) *For more details, please refer to the PDF document or feel free to contact us.

• others

Built-in cyclone-type economizer! Ideal for amusement facilities, baths, and public bathhouses!

The "Biomass-Fired Natural Circulation Steam Boiler" is a small, simple water-tube natural circulation boiler. No boiler technician or installation notification is required (not subject to regulations). It is equipped with a built-in cyclone economizer. The equivalent evaporation rate is 1t/h, and the maximum operating pressure is 0.98MPa. It can be used in places such as amusement parks, bathhouses, public baths, and hotels. 【Features】 ■ Small, simple water-tube natural circulation boiler that does not require a boiler technician or installation notification (not subject to regulations) ■ Built-in cyclone economizer ■ Equivalent evaporation rate: 1t/h ■ Maximum operating pressure: 0.98MPa *For more details, please refer to the PDF materials or feel free to contact us.

• others

Utilized for regional heating and road snow melting at municipal offices and fire stations! Example of UTSR-1200.32.

We would like to introduce a case study on the introduction of a wood biomass boiler to the district heating system around the Shimokawa Town Hall. This system realizes energy self-sufficiency and a low-carbon society through a regional circulation system of wood energy, achieving significant reductions in fossil fuel use and continuing to do so. Including this unit, a total of six biomass boiler systems have been installed within the town. [Case Overview] ■ Application: District heating for the town hall, fire station, etc. and road snow melting ■ Fuel: Wood chips (moisture content DB 100%) ■ Hot water unit model: Movable grate type UTSR-1200.32 ■ Hot water unit output: 1200 kW ■ Silo discharge system: Push feeder type ■ Installation date: February 2010 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Introducing a case of a water-tube type small simple flow boiler with a conversion evaporation rate of 1 ton/h!

We would like to introduce a case study on the introduction of a wood biomass boiler at Kagoshima University Hospital. In accordance with the Earth Global Warming Countermeasure Implementation Plan, we are utilizing the rich forest resources of the university's training forests to reduce CO2 emissions. To achieve a unique eco-cycle, we have introduced a "wood biomass steam boiler." 【Case Overview】 ■ Application: Steam heat source ■ Fuel: Wood chips (moisture content DB 100%) ■ Boiler type: Water tube small simple through-flow boiler ■ Combustion furnace: Movable grate type UTSR-900.32 ■ Silo discharge system: Push feeder method ■ Installation date: February 2012 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Reliable technology that is not affected by fluctuations in fuel quality! Achieving a long lifecycle.

We would like to introduce our product, 'UTSR visio.' The thermal storage tank contributes to load adjustment in heat supply and efficient operation, reducing the number of start-stop cycles, leading to low emissions and economical operation. Additionally, the filter technology complies with regulatory values in various countries and incorporates a multi-cyclone within the boiler itself. 【Features】 ■ Lower and more stable fuel costs compared to fossil fuels ■ Economical and efficient operation through optimal combustion technology ■ Combustion chamber manufactured to high quality standards ■ Achieves a long lifecycle ■ Highly reliable technology unaffected by fluctuations in fuel quality *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Utilizing forests as a circular resource! Aiming to reduce CO2 and effectively utilize waste.

We would like to introduce a case study regarding the introduction of a wood biomass boiler at Shoji Lumber Mill, Kamabuchi Factory. By converting a large amount of cedar bark (tree bark) generated in-house into boiler fuel for energy and drying wood, we are utilizing forests as a "circular resource," aiming to reduce CO2 emissions and effectively utilize waste. This has become a model case for using bark as fuel, with biomass boilers installed at three locations: Kanayama Factory, Kamabuchi Factory, and Mamurogawa Factory. [Case Overview] ■ Application: Industrial hot water wood drying ■ Fuel: Wood bark (moisture content DB 100%) ■ Hot water machine type: Movable fire grate type UTSR-1600.32 ■ Hot water machine output: 1500 kW ■ Silo discharge system: Push feeder & chain conveyor method ■ Installation date: October 2009 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Expected as a new energy alternative to kerosene and heavy oil! A case study of a hot spring facility in Tsushima City, Nagasaki Prefecture.

We would like to introduce a case study on the introduction of a wood biomass boiler at Nagisa no Yu, a hot spring facility in Tsushima. We are utilizing wood chips made from leftover materials and backboards generated during the processing of thinned wood from Tsushima as boiler fuel for the hot spring facility. In Tsushima, many leftover materials are left unused, and there is hope for new energy sources to replace kerosene and heavy oil, given the abundant forest resources. 【Case Overview】 ■ Application: Hot spring facility for hot water supply and flowing baths ■ Fuel: Wood chips (moisture content DB 50%) ■ Hot water machine model: Down-draft combustion furnace UTSK-240.22 ■ Hot water machine output: 240 kW ■ Silo discharge system: Vent arm type ■ Installation date: February 2010 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Examples of community disaster prevention facilities equipped with alternative energy that can respond during disasters!

We would like to introduce a case study on the introduction of a wood biomass boiler at the New Energy Utilization Citizen Exchange Center. This facility serves as a model for the conversion of renewable energy with heating and cooling systems powered by a wood biomass boiler, and it is a community disaster prevention hub equipped with self-generation capabilities. Furthermore, it is utilized as a public facility that combines multiple purposes as a model for promoting the utilization of wood resources. 【Case Overview】 ■ Purpose: Hot water supply, heating and cooling, power generation ■ Fuel: Wood chips (moisture content WB 50% or less) ■ Hot water boiler model: Movable grate type UTSR-240.32 ■ Hot water boiler output: 240 kW ■ Silo unloading system: Vent arm type ■ Installation date: February 2015 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Used for heating bathtubs, hot water supply, and lobby heating in accommodation facilities! Reducing CO2 emissions.

We would like to introduce a case study on the introduction of a wood biomass boiler at the Kawashita-so in the Miyama Town Nature and Culture Village. Using dead trees from oak and pine, as well as thinned wood as fuel, it is utilized for heating the bath in the accommodation facility, providing hot water, and heating the lobby. Before the introduction, an oil boiler was used as the heat source, but with the installation of the biomass boiler, fossil fuel consumption has been reduced, leading to a decrease in CO2 emissions from fossil fuels. 【Case Overview】 ■ Application: Accommodation facility hot water supply, bath heating, heating ■ Fuel: Wood chips (moisture content DB 100%) ■ Hot water unit model: Movable grate type UTSR-300.32 ■ Hot water unit output: 300 kW ■ Silo discharge system: Vent arm type ■ Installation date: March 25, 2012 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Utilized for hot water supply in bathing facilities for the elderly! Case study of the rotating fire grid type ENER-D200.

We would like to introduce a case study on the introduction of a wood biomass boiler at the Jiseien Social Welfare Corporation. The boiler, fueled by wood pellets made from wood waste, provides hot water for bathing at a nursing home for the visually impaired, a special nursing home for the elderly, and a day service center, contributing to CO2 reduction for climate change prevention. 【Case Overview】 ■ Application: Hot water supply for elderly welfare facilities ■ Fuel: Wood pellets ■ Hot water unit model: Rotary grate type ENER-D200 ■ Hot water unit output: 200 kW ■ Silo unloading system: Spring arm type ■ Installation date: December 2009 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Introducing a case study of a tourist farm in Nankoku City, Kochi Prefecture, which attracts 80,000 to 100,000 visitors annually!

We would like to introduce a case study regarding the introduction of a wood biomass boiler at Nishijima Gardening Complex Co., Ltd. As a hybrid system combining an existing heavy oil boiler and wood biomass energy, a wood chip boiler has been installed for heating greenhouses over 1.2 hectares out of a total of 4 hectares, using hot water to cultivate melons and other crops. The boiler room and silo have been appropriately installed in the empty space between the greenhouses, and the handling of combustion ash has been automated to simplify operations. 【Case Overview】 ■ Application: Hot water greenhouse heating ■ Fuel: Wood chips (moisture content DB 100%) ■ Hot water unit model: Movable grate type UTSR-700.32 ■ Hot water unit output: 700 kW ■ Silo discharge system: Push feeder type ■ Installation date: September 2011 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Introducing examples of utilizing heat sources for facility hot water supply, bathtub heating, and pool heating!

We would like to introduce a case study on the introduction of a wood biomass boiler at the health promotion facility "Hottu Apple" in Iida City. As an environmental model city, we implemented a pellet boiler with the aim of reducing greenhouse gas emissions. Using locally produced wood pellets, the pellet boiler serves as the heat source for hot water supply, bathtub heating, and pool heating at the facility. [Case Overview] ■ Purpose: Health promotion facility hot water supply, bathtub and pool heating, floor heating ■ Fuel: Wood pellets ■ Hot water unit model: Down-combustion furnace UTSP-550.22 ■ Hot water unit output: 550 kW ■ Silo unloading system: Spring arm type ■ Installation date: March 2010 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

Establish local production and consumption of forest resources! Achieve significant reductions in fossil fuels and CO2.

We would like to introduce a case study on the introduction of a wood biomass boiler at the Mogami Town Wellness Plaza. By effectively utilizing local forest resources as energy and integrating three wood chip boiler systems, the special nursing home "Kōbai-sō" and other local facilities provide heating, cooling, and hot water, contributing to the establishment of a circular society. This has achieved significant reductions in fossil fuel use and CO2 emissions by establishing local production and consumption of forest resources. [Case Overview] ■ Application: Community heating, cooling, and hot water for hospitals and nursing homes ■ Fuel: Wood chips (moisture content DB 100%) ■ Hot water boiler model: Movable grate type UTSR-550.32, 700.32, 900.32 ■ Hot water boiler output: 550 + 700 + 900 kW ■ Silo unloading system: Push feeder type ■ Installation period: March 2007 to March 2012 *For more details, please refer to the PDF document or feel free to contact us.

• Boiler

We provide products that can be useful around heat sources! They are hidden in unexpected places.

We would like to introduce the range of products we handle. Starting with high-power commercial clothes dryers and washing machines, known as "laundry products," we also offer customizable "boilers and non-pressurized hot water units" that can be tailored to meet specific purposes and applications. Additionally, we have "biocoke boilers," "residue boilers," and "biogas boilers," among others. 【Products We Handle (Partial List)】 ■ Laundry Products ■ Boilers and Non-Pressurized Hot Water Units ■ Filtration Circulation Devices ■ Polar Reversal Lightning Rod "PDCE" ■ Far Infrared Heaters *For more details, please refer to the PDF materials or feel free to contact us.

• Boiler

In the latest "Age Estimation Evaluation Test" conducted by NIST, the AI facial recognition engine "FaceMe" ranked 5th in the world. 【What is the NIST FATE Age Estimation Evaluation Test?】 The NIST FATE Age Estimation Evaluation Test is one of the international benchmarks for facial analysis technology conducted by the National Institute of Standards and Technology (NIST) in the United States, which evaluates the age estimation accuracy of AI algorithms using a large-scale facial image dataset. 【Evaluation Results of FaceMe】 - World Ranking: 5th FaceMe ranked 5th among 20 global vendors, demonstrating top-class accuracy in an international competitive environment. - Mean Absolute Error (MAE): 2.87 years The average error in FaceMe's estimated age is 2.87 years, with only a 0.35-year difference from the top-ranked algorithm, achieving world-class accuracy. *MAE (Mean Absolute Error): Quantifies the error in estimated age (the smaller the number, the higher the accuracy). *NIST conducted the evaluation using 1 million facial images of individuals aged 18 to 30.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.