Notice of Participation in the "Yakiniku Business Fair / Izakaya JAPAN"

STOP food poisoning. Ozone water concentration 1.5ppm, 99.9% kill rate. Strongly supports hygiene management with disinfectant water made from tap water.

The small ozone water production device (SAT-GW series) is a unit that can generate ozone water with just one installation. It can be selected based on its intended use, either as a wall-mounted or portable model. It is easy to use only when needed, and it is low-cost with excellent maintenance features. <Features> 1: Does not create resistant bacteria It dissolves nucleic acids (RNA and DNA), preventing the creation of resistant bacteria. 2: Safe and secure Unlike chlorine-based agents, there is no worry about skin irritation, allowing for safe use. 3: Pure ozone generation With built-in PSA, it does not produce Nox and generates high-purity ozone water. Maintenance after installation is handled by our specialized in-house team, so you can be assured of aftercare and emergency response. For more details, please contact us or download the catalog.

• Ozone Generator

Virus inactivation and sterilization with mercury-free excimer lamp [Medical device approval obtained]

The mercury-free excimer lamp generates ozone to inactivate and sterilize airborne and surface viruses and bacteria. You can choose from two types, "Eximan S" and "Eximan M (approved as a controlled medical device)," depending on the location and application. The installation methods include "ceiling-mounted/direct ceiling type" and "ceiling recessed type," making it possible to install in any location, from existing buildings to new constructions. <Features> 1: Approval as a controlled medical device It is the first ceiling-mounted ozone gas sterilization device to obtain approval as a controlled medical device (Class 2). 2: The world's first environmental revolution It adopts a mercury-free excimer lamp using the excited dimer method with xenon. It does not use mercury, which is an environmental pollutant. 3: Sterilization, deodorization, and bacteriostasis with one unit In unoccupied conditions, high-concentration ozone fumigation acts on both airborne and surface bacteria, sterilizing the entire space. In occupied conditions, it releases low-concentration ozone for deodorization and bacteriostasis. 4: Maintenance management Ozone is generated from oxygen in the air, so there are no raw material costs. The released ozone returns to oxygen, leaving no residue.

• Ozone Generator

Ideal for addressing odor control needs in the neighborhood.

Arushiman is a deodorizing device for kitchen exhaust that was developed using nanoparticle technology. It achieves high deodorization effectiveness and long filter life through two mechanisms: "adsorption-desorption" and "catalytic decomposition" enabled by nanoparticle technology. By installing the necessary number of deodorizing filters according to the processing air volume, it can accommodate various requests and shapes, addressing the needs for odor control in regulated areas under the Odor Prevention Law, as well as concerns regarding cooking odors emitted from kitchens, thus meeting the needs for odor control in neighboring areas.

• others

Quickly deodorize and disinfect the space, creating a comfortable environment with "Radica."

The wall-mounted ozone deodorization device "Radika" is an ozone deodorization system that can be installed in various locations, from existing buildings to newly constructed ones. Since it can be installed individually, it allows for concentration adjustments in each room. <Features> 1: Generation of pure ozone By adopting a lamp method, it is capable of generating ozone without NOx (nitrogen oxides) or impurities. 2: Low running costs The use of inverter-type cold cathode lamps extends the lifespan of the lamps and achieves low running costs. 3: Safety control Automatic operation via a timer eliminates the need for manual operation. Ozone levels can be set according to the size of the room and the odor level. 4: Easy installation Compatible with power outlets, making installation simple. It can also be retrofitted to existing buildings. For more details, please contact us or download the catalog.

• Other environmental equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.