The product page for 【Suntool】 has been updated! 【Achieving uniform non-contact application of hot melt in a fibrous form【Curtain Spray】】.

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

• Other mounting machines

Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray coat in a single application over a wide area!

The "Curtain Spray" is a device that utilizes the cohesive force and viscosity of hot melt (adhesive) to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can also spray apply in one piece over a wide width. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability ■ Cost benefits through reduced usage of hot melt (adhesive) ■ Compatible with adhesives from high viscosity to low viscosity ■ Even application weight, beautifully coated uniformly ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Seals ■ Filters ■ Films ■ Spray lamination ■ Non-woven fabrics

• Other mounting machines
• Painting Machine
• spray

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and allows for thin application as well!

【Sample Distribution】We are currently distributing coating samples. Please check the end of the article for details. The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It allows for seamless and even application on wide materials, which is difficult with conventional spray coating, and also enables thin application. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials industries. *Uniform microparticle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Capable of uniform application of a small amount of hot melt ■ Excellent coating with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to coating ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. For a limited time, we will send coating samples only to companies that inquire! Please feel free to contact us!

• Painting Machine

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

• Other mounting machines
• Painting Machine
• spray

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with just one unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment is possible up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for wide-range detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

Many people may have questions like, "What can be done with IoT?" and "What is needed?" upon hearing the term IoT. Through digital communication, it is possible to obtain various information such as flow sensors, valves, circuit boards, and abnormal monitoring that were not accessible with traditional analog control. For example, by monitoring the valve opening, one can detect blockages in the equipment and identify leaks from cumulative flow. This information directly contributes to reducing downtime and improving quality through continuous long-term monitoring and knowledge-based management. Compatible models include those with digital communication via RS485, in addition to traditional analog controls like 0-5VDC and 4-20mA. (Older models such as the 58xxS, MfxxS series, SLA58xxS, and SLAMfxxS series). Even older models that do not support digital communication can be upgraded to the latest mass flow models, enabling digital communication. The dimensions between new and old models are the same, and no wiring changes are necessary. Additionally, we can provide control boxes for data collection from mass flow. This enables a "visualization" of small IoT without making large changes to the equipment.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Model SLA5850/SLA5851/SLA5853/SLA5860/SLA5861/SLA5863 "With just one unit, you can use 14 types of pressure and flow rates in a single process." Imagine such a mass flow controller platform. Moreover, it features excellent reproducibility, precision, and repeatability. This is the evolved simple performance of the SLA5800 series mass flow controllers/meters. The SLA5800 series boasts high accuracy, zero point stability, and repeatability that are characteristic of Brooks Instrument, a leader in mass flow measurement and control technology. Equipped with configurable advanced multi-gas/multi-range capabilities, it offers superior zero drift specifications compared to competing products while demonstrating long-term maintenance of factory calibration and accuracy.

Model SLAMf50 / SLAMf51 / SLAMf53 / SLAMf60 / SLAMf61 / SLAMf63 / SLAMf64 "Durability to withstand harsh environments! Achieving excellent precision with precise mass flow control" Whether indoors or outdoors, in environments with dust or places that handle water, the 'SLAMf series' elastomer seal thermal mass flow controllers/meters provide proven high precision and long-term stability unique to the "SLA5800 family." Applications ■ Pilot plants for petrochemical and chemical gases ■ Life science bioreactors ■ Blanketing in food processing