What is a flash diaphragm? What are its advantages?

High-precision pressure sensor with RS485 digital output, flash diaphragm type - can be used from -40°C!

The pressure sensor 35X achieves an extremely high accuracy of 0.05% full scale (FS) over a temperature range of 10 to 40°C through a mathematical correction method. An additional option for high precision of 0.01% FS is also available. In addition to a digital RS485 interface, analog current or voltage outputs are provided. The pressure connection features a G1/2 flush diaphragm structure. 【Features】 - ±0.05 %FS accuracy - The flush diaphragm structure allows for cleaning of the pressure receiving part! - Standard dual outputs of digital RS485 and analog output - The analog output can be range-adjusted via digital RS485 - Temperature range of -40 to 125°C - Excellent long-term stability 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to produce accurate pressure values *What is a flush diaphragm structure? Typical pressure sensors have a screw at the tip, with the pressure receiving part located behind it. However, if you want to measure the pressure of ink or need to regularly clean the pressure receiving part, it is not possible to see inside, making it difficult to confirm whether it has been cleaned properly. In such cases, a flush diaphragm with the pressure receiving surface exposed is recommended!

• Pressure

High-temperature pressure sensor that can measure media temperatures up to 150℃. The flash diaphragm structure makes sterilization and cleaning easy!

The pressure sensor 35XHT/35XHTT can be used for media temperatures up to 150°C and is suitable for use in bioreactors and autoclaves that require regular sterilization due to its flush diaphragm structure. It achieves an accuracy of ±0.15% full scale (FS) over a temperature range of 20 to 120 °C using a mathematical correction method. The pressure connection of the standard model in the 35XHTT series features a G1/2 flush diaphragm structure. 【Features】 〇 Usable for media temperatures up to 150°C 〇 Standard equipped with two outputs: digital RS485 and analog output 〇 Analog output can be range-adjusted (turndown) via digital RS485 〇 Excellent long-term stability *What is a flush diaphragm structure? Unlike regular pressure sensors that have a screw at the tip with a pressure receiving part behind it, if you want to measure the pressure of ink and need to regularly clean the pressure receiving part, you cannot confirm if it has been cleaned properly since you cannot see inside. In such cases, a flush diaphragm with the pressure receiving surface exposed is recommended!

• Pressure

High-temperature pressure sensor that can be used up to 300℃, achieving ±0.5% accuracy at 300℃!

The high-temperature pressure sensor 35XHTC can be used for media temperatures up to 300°C. It is significantly different from the commonly available pressure sensors that can simply be used at high temperatures, as it achieves high accuracy of ±0.5% full scale (FS) even at a media temperature of 300°C through a mathematical correction method. In addition to a digital RS485 interface, analog current or voltage outputs are available, and scaling settings can be configured via the digital signal. The pressure connection is standard G1/2 male thread (flush diaphragm). *From 2025, the model name will change to 35HTCX. 【Features】 • Can be used at media temperatures up to 300°C, achieving ±0.5% accuracy at 300°C • Standard dual outputs of digital RS485 and analog output • Analog output range can be changed via digital RS485 (turndown) • Excellent long-term stability • Cooling capillary tube structure

• Pressure

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will jointly exhibit a booth with Ronsir Co., Ltd. at the "Hokkaido Energy Technology Innovation EXPO 2025," which will be held at Access Sapporo (Hokkaido) from October 8 (Wednesday) to October 9 (Thursday), 2025. Due to recent extreme heat, heat mitigation measures are also being sought in Hokkaido. At this exhibition, we will introduce heat mitigation strategies for buildings and outdoor equipment using SPACECOOL, along with actual implementation examples in Hokkaido, in collaboration with Ronsir Co., Ltd. Main Exhibition Content SPACECOOL Co., Ltd. - Explanation of SPACECOOL technology and introduction of actual implementation examples - Samples of SPACECOOL products (films, magnetic sheets, membrane materials, etc.) Ronsir Co., Ltd.: Innovation Proof RR - Actual model and implementation examples of the SPACECOOL integrated waterproof sheet "Innovation Proof RR" - Temperature sensation device for Innovation Proof RR Exhibition Overview Dates: October 8 (Wednesday) to October 9 (Thursday), 2025, 10:00 AM to 4:00 PM Venue: Hokkaido, Access Sapporo Our booth number: 405 (2 booths) *Advance registration is required for attendance (free).