Terahertz Communication Research - Latest Research Results and Useful Components

Tunable terahertz frequencies up to 2.7 THz are available! You can obtain the desired frequency precisely.

The TeraScan tunable terahertz light source from TopTika utilizes a frequency domain generation method with semiconductor lasers, allowing for the precise acquisition of desired frequencies within a frequency range of 0.1 THz to a maximum of 2.7 THz, making it a groundbreaking terahertz light source. - Extensive frequency scan range of 0.1 to 2.7 THz - Maximum dynamic range of 90 dB (S/N ratio) - Continuous wave oscillation (CW) without the need for complicated timing synchronization - Auto frequency control function via dedicated software - High-performance photoconductive antennas for both emission and reception included - Compact tabletop-sized head and 19-inch rack controller

• Defect Inspection Equipment

A versatile time-domain terahertz platform! We are offering an English version of the catalog.

The "TeraFlash pro" is a tabletop time-domain terahertz spectroscopy platform. Recent improvements in laser and antenna design have enabled this system to achieve a peak dynamic range of 100 dB and a bandwidth of over 6 THz. It sets new standards in dynamic range, bandwidth, and measurement speed. Equipped with a high-precision mechanical delay stage, it can achieve 60 pulse traces per second at 50 ps, or 95 pulse traces per second at 20 ps. 【Features】 ■ 100 dB peak dynamic range, >6 THz bandwidth ■ Adjustable THz path length: 15 cm - 110 cm ■ Fast shaker - 60 pulse traces per second at 50 ps ■ "Dual" version including two pairs of emitters/receivers * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other embedded systems (software and hardware)

TeraBeam emitter/receiver module

- Adoption of cutting-edge photomixing technology - GaAs and InGaAs-based oscillators/detectors - Complete package module equipped with SM/PM fiber pigtailed - High output of up to 100 µW - TeraBeam 780 or TeraBeam 1550 is required separately.

• Analytical Equipment and Devices

- Zero-bias Schottky diode - Output signal optimized for terahertz power - Ideal for terahertz imaging

- Zero-bias Schottky diode - Output signal optimized for terahertz power - Ideal for terahertz imaging - Two versions: high sensitivity / wide bandwidth - The ultra-fast version enables measurement of all THz pulses

• Spectroscopic Analysis Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.