Notice of Participation in the 1st [Kyushu] Semiconductor Industry Exhibition

This is a cable that converts transmission signals into optical signals and extends them via optical fiber cables. It supports USB 3.1, HDMI 2.0, and DP 1.4.

■USB3.1 Type-A AOC (Active Optical Cable) - This cable converts transmission signals into optical signals and extends them using fiber optic cables. - Cable lengths: 10M, 20M, 30M, 50M, supporting a maximum of 50M. - Transmission speed: up to 5Gbps. Hot-plug compatible, no drivers required. High-bend specifications are also available. ■HDMI2.0 Type-A AOC (Active Optical Cable) - This cable converts transmission signals into optical signals and extends them using fiber optic cables. - Cable lengths: 10M, 20M, 30M, 50M, supporting a maximum of 100M. - Supports 4K @60Hz. High-bend specifications are also available. ■Display Port1.4 Type-A AOC (Active Optical Cable) - This cable converts transmission signals into optical signals and extends them using fiber optic cables. - Cable lengths: 10M, 20M, 30M. - Supports 8K 4*8.1G bps. High-bend specifications are also available. ■Delivery specifications, RoHS2, environmental documentation (such as chemSHERPA), 4M variation/notification of discontinuation in advance, and support for defect analysis/countermeasures.

• cable

This is a panel mount type that allows you to directly secure a USB cable to the control panel and other surfaces.

● This is a panel mount type that allows USB cables to be directly fixed to control panels and other surfaces. By integrating the USB connector with the flange, it can be easily secured to the panel. ● Please consult us for custom dimensions, screw sizes, etc., for the panel fixing part. ● Compatible with USB versions 1.0, 2.0, 3.0, and 3.1. ● The connectors can be freely combined. Supports Type A, Type B, Mini B, Micro B, and space-saving L-type connectors. ● Cable lengths can be customized to 0.5M, 1M, 2M, 3M, or any other length. ● Fixed screws are available in M3 size, with embedded nuts. ● Environment: Compliant with ROHS/REACH and related environmental documentation. ● By exchanging specifications, we can solve issues related to sudden discontinuation or changes in 4M. ● Made in China. We accept small lot orders.

• relay

Screws can be directly fastened to the equipment panel, allowing the LAN female connector to be positioned anywhere.

■Specifications - It is an existing mold from the factory. - It can be directly screwed onto the equipment panel with M3 screws. - Cable length, AWG specifications, and other custom specifications are available. - The connector on the opposite side is available in straight and right-angle configurations.

• relay

We offer both sheet metal types and molded types! We have a proven track record of numerous deliveries for industrial equipment in Japan!

Traditionally, USB female connectors required board mounting, which limited their installation position to align with the board's location. This product can be directly screwed onto the device panel, allowing for the USB female connector to be placed anywhere. It is also suitable for use with USB memory sticks, USB dongles, and more. We offer both metal and molded types, and both types support various connectors on the opposite side, including USB-A, B, Mini-B, Micro-B, straight, and right-angle specifications, accommodating various board-in connectors. 【Features】 ■ Can be directly screwed onto the device panel ■ Allows for USB female connector placement anywhere ■ Well-suited for use with USB memory sticks, USB dongles, etc. ■ Has a proven track record of numerous deliveries for industrial equipment in Japan *For more details, please refer to the PDF document or feel free to contact us.

• cable

This is an IP67 waterproof M5/M8/M12 standard connector/cable. It supports a variety of specifications and pin counts, including options for L-shaped and shielded designs.

■Features - Connectors/cables compliant with IEC61076-2 standards, suitable for harsh industrial applications and excellent weather resistance. Available in various shapes, including L-shaped and with or without shielding, and supports multiple pin counts. - CODING: Supports A, B, D, L, K, S, T, X, and F-KEY. - Compliant with RoHS2. - Materials: Housing: Nylon + GF Shell/Screw Nut: Copper or Zinc Alloy, Nickel Plated Terminal: Copper Alloy, Gold Plated - Achieves high quality and low cost through consistent production. Ideal for VA proposals. - Numerous achievements with major domestic industrial equipment manufacturers. - Supports small lot orders and short delivery times. - Cable assembly processing is also available. ■Supports delivery specifications, RoHS2, environmental documentation (such as chemSHERPA), advance notification of 4M fluctuations/discontinuations, and defect analysis/countermeasures. ■Applications: FA, M2M, IoT, image/broadcast systems, medical devices, industrial PCs, construction machinery, robots, UAVs, ATMs, POS, communication systems, social infrastructure, etc. Numerous delivery achievements for industrial equipment in Japan.

• relay

USB-A 3.0 IP67 compliant waterproof cable

- IP67 compliant - Temperature Range: -20℃ to +80℃ - USB Jack: USB-A 3.0 Blue - USB Plug: USB-A 3.0 Blue - Cable: (28AWG*1P + D + A + M)*2 + 28AWG*1P + 24AWG*2C + F + A + B, PVC Black, OD=φ5.5mm - Cable Length: L=1m, 2m, 3m, 4m, 5m, L=10cm, L=15cm, L=30cm, L=50cm

• relay
• relay

It can be directly screwed onto the equipment panel, allowing for the placement of the HDMI female connector in any desired location.

■Features - Traditionally, HDMI female connectors required board mounting, which limited the installation position to the location of the board. The HDMI panel mount cable can be directly screwed onto the device panel, allowing for the HDMI female connector to be placed anywhere. ■Specifications - HDMI 2.0 High Speed HDMI cable length: 0.2M - Supports a maximum video resolution of 4K*2K @50/60Hz (2160p) - Transmission speed: up to 18Gbps - Supports 3D video, Deep Color, and x.v.Color - Fixed screw size: 4-40, length 15mm included - Fully shielded conductors are excellent for EMI/RFI interference prevention, and the connector is gold-plated with 24K - Flat cable type is also available.

• relay
• relay

Zero friction, zero resistance, and zero dust! This is an air cylinder that uses air bearings!

The "Fujikura Composite Air Bearing Cylinder" is an air cylinder that employs air bearings in the rod guide section. Since there is no contact between the rod and the guide, it features no sliding resistance, wear, or dust generation. 【Features】 - There is no contact between the rod and the guide, resulting in no sliding resistance, wear, or dust generation. - Compared to other types of air bearings, it excels in resistance to lateral loads. - Due to the lack of resistance, precise driving at low pressure and low speed is possible. - Since there is no resistance between the rod and the guide, stick-slip does not occur during operation. *Please refer to the PDF data available for download for the catalog of the "Fujikura Composite Air Bearing Cylinder."

• Other processing machines
• Other cutting tools

Non-contact, high-speed response allows for control as you wish. Custom orders are available starting from one unit!

The "Air Bearing Cylinder AC Series" that we handle uses air bearings in the piston rod guide section, allowing for non-contact strokes and resulting in a cylinder with no friction resistance. By adopting metal sintered air bearings, we achieve high lateral rigidity and low consumption flow rate. We can accommodate custom orders tailored to your needs, including super-large types up to φ190mm, starting from just one unit. 【Examples of Applications】 ■ Balancer for precision machining machines ■ Tension control in the production of various high-performance films *For more details, please refer to the PDF materials. Feel free to contact us with any inquiries.

• Pneumatic Equipment
• Wafer processing/polishing equipment
• Bonding Equipment

Air bearing cylinder with zero friction resistance.

By using air bearings (static pressure bearings) in the guide section, it is possible to achieve non-contact strokes, eliminating friction resistance. Long strokes, which are difficult with BF cylinders, can be achieved.

• Pneumatic Equipment
• Wafer processing/polishing equipment
• Bonding Equipment

By using a composite film with a silicone or fluorine-based non-stick layer on the silica coat Tofumaku, high friction durability and release properties are achieved!

Tofumak refers to a silica (SiO²) thin film formed on the surfaces of metals, glass, resins, and rubber. Tofumak is a very hard film with properties comparable to quartz, such as hardness and chemical resistance, and it can exhibit non-stick properties by combining silicone and fluorine-based coatings. <Features> - Has hardness comparable to quartz (very hard) - Excellent adhesion to untreated agents - Colorless and transparent - Excellent heat resistance - Excellent chemical resistance - Excellent electrical insulation - Non-stick and slippery, with a foreign matter adhesion prevention effect (When silicone and fluorine-based coatings are combined to enhance non-stick properties) Manufacturer: Yamanaka Hutech Co., Ltd.

• Other surface treatment equipment
• Coating Agent

We offer a wide variety of transmitter lineup. We also support receiver-side modules.

■Specifications - Frequency: 433.92MHz - Leakage current: ≦3.5μA - Operating ambient temperature: -5℃ to +50℃ - Operating distance: 30m to 50m (varies depending on the surrounding environment) - Operating voltage: 2.2V to 3.3V - Battery used: Battery compliant with safety standard IEC62133 - Charging method: Type C connector - Operating current: 8mA < I < 10mA

• relay
• relay

Obtaining overseas technical conformity certification. TELEC certification obtained. Leave the Radio Law application to us.

■Specifications - Bluetooth Ver 4.2 - Operating temperature: -5℃ to +50℃ - Operating voltage: 2.2V to 3.3V - Leakage current: 3.5μA - Operating distance: 30m to 50m (varies depending on the surrounding environment) - Operating current: 8mA < I < 10mA - Battery used: Battery compliant with safety standard IEC62133 - Charging method: Type C connector, Micro USB, etc.

• relay
• relay

Take photos with your smartphone via Bluetooth connection from a distance! A super compact wireless selfie remote.

We handle everything from development to productization. Leave it to us! ◇Small quantities ◇Samples ◇Variety of products ◇Mockup production Wireless remote control that can take pictures remotely Compact size for easy portability Perfect for group photos and similar shots Easy pairing setup With LED lamp With strap

• relay
• relay

If you choose the standard products from the factory, there will be no mold costs incurred. We will accommodate you at a low cost.

Remote controls are useful in various fields such as industrial equipment, communication systems, medical devices, and the amusement industry. Nitto Shoji Co., Ltd.'s Yokohama sales office consistently handles everything from development to manufacturing as an ODM/OEM manufacturer. If you choose from our standard products at our partner factories, there will be no mold costs incurred, and we can provide them at a low cost.

• cable

Adoption of a substrate compatible with glass-epoxy that excels in high-frequency characteristics! We also perform battery assembly work and functional testing.

We offer an "Infrared Card Remote Control" that can be used for various applications such as industrial PCs, robots, ATMs, and POS systems. We use a substrate compatible with glass epoxy that excels in heat resistance, insulation resistance, and high-frequency characteristics. An optional built-in magnet is available, so you won't have to worry about where to place the remote control. We have a significant track record of deliveries within Japan, particularly for industrial equipment, and we also perform battery assembly and functional testing. Please feel free to consult us. 【Features】 ■ Key Structure: Membrane Switch, Key layout can be changed ■ Substrate: Glass epoxy compatible with excellent heat resistance, insulation resistance, and high-frequency characteristics ■ Built-in magnet available (optional) ■ Extensive delivery record for industrial equipment and more *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• controller
• Safety Controller

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.