We are offering the 【Wire Mapper NC-100】 at a special price, which allows for easy checking of LAN cables and telephone wire maps, as well as tone generation!

The new cable length measuring device 'TV220E' can detect instantaneous cable faults without missing them, and also allows for comparative display of measurement results with the "two-phenomenon comparison"!

The "TV220E" is a TDR cable length measurement device that can detect cable breaks and short circuits without missing any issues. It can handle difficult faults with high sensitivity up to a maximum length of 5.6 km, achieving ultra-high precision measurements of ±0.01%. Saved waveforms can be shared via USB or Bluetooth. Results can be saved, shared, and printed on a PC using dedicated software. 【Features】 ■ Ability to identify the type and location of faults using waveforms (breaks, shorts, ground faults, branching, poor connections) ■ Easy diagnosis with an advanced large color LCD screen ■ Rechargeable lithium-ion battery ■ Tone generator function for cable tracing ■ Dual phenomenon display for comparing good and faulty lines ■ Advanced zero-blind specification allowing measurements from 0m ■ A robust and waterproof case-integrated model, the "TV220EX," is also available! *For more details, please download the PDF or feel free to contact us.

• Distance measuring device

[New Product] Explore distances of 7km and capable of exploring wiring routes within 3m of the cable!

The "Super Piro-chan SP780" is a digital cable and breaker locator that can explore wiring routes within a range of 3 meters from the cable and a distance of 7 km. It is a fusion of a tone probe and a cable locator. It achieves exploration that is completely unaffected by noise through a digital transmission and reception method. It can reliably identify lines from 0V unpowered lines to 600VAC live lines. With a non-contact clamp (sold separately), it is also possible to send exploration signals from the middle of a cable. 【Features】 ■ Automatic and manual reception mode switching allows for the exploration of target lines according to the situation. ■ Reliable identification of breakers and devices that correspond to outlets and terminals. ■ Instant selection of target lines within racks and shafts from above the insulation. ■ Ability to send signals to hidden cables and explore all wiring routes within a building. ■ Safe non-contact transmission enables identification of wiring routes and terminal devices. ■ Pinpoint detection of disconnections, ground faults, and low-resistance ground fault locations is also possible. *For more details, please refer to the PDF document or feel free to contact us.

• others

You can perform cable length measurement, diagnostics, and data storage on a tablet's large color screen! A tester that can measure the distance to disconnection points and fine faults!

"TX Ranger S" is a TDR cable length measurement and diagnostic device that can identify the distance to fine fault locations. Measurement results are analyzed on a PC screen using dedicated software. It can store up to 50 events in the main memory. Additionally, it features a dual phenomenon display that allows for comparison between good and faulty lines, and it is compatible with all metal cables with two or more cores. [Features] ■ Capable of identifying the distance to fine fault locations ■ Measurement of remaining length of removed cables and drums ■ Cable fault details can be understood through waveforms ■ Wireless transmission of measurement data via Bluetooth ■ Fault diagnosis of terminal devices and sensors is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will jointly exhibit a booth with Ronsir Co., Ltd. at the "Hokkaido Energy Technology Innovation EXPO 2025," which will be held at Access Sapporo (Hokkaido) from October 8 (Wednesday) to October 9 (Thursday), 2025. Due to recent extreme heat, heat mitigation measures are also being sought in Hokkaido. At this exhibition, we will introduce heat mitigation strategies for buildings and outdoor equipment using SPACECOOL, along with actual implementation examples in Hokkaido, in collaboration with Ronsir Co., Ltd. Main Exhibition Content SPACECOOL Co., Ltd. - Explanation of SPACECOOL technology and introduction of actual implementation examples - Samples of SPACECOOL products (films, magnetic sheets, membrane materials, etc.) Ronsir Co., Ltd.: Innovation Proof RR - Actual model and implementation examples of the SPACECOOL integrated waterproof sheet "Innovation Proof RR" - Temperature sensation device for Innovation Proof RR Exhibition Overview Dates: October 8 (Wednesday) to October 9 (Thursday), 2025, 10:00 AM to 4:00 PM Venue: Hokkaido, Access Sapporo Our booth number: 405 (2 booths) *Advance registration is required for attendance (free).