[Part 2] A comprehensive showcase of solutions to troubles and issues in the molding and processing of rubber products! Introducing a total of 10 case studies, including planning and mass production of rubber products and compliance with food sanitation laws.

[Part 2] A comprehensive showcase of case studies solving troubles and issues in the molding and processing of rubber products! Introducing a total of 10 cases, including planning and mass production of rubber products and compliance with food sanitation laws.

For those struggling with the molding and processing of rubber products! 【Part 2】 We are offering a booklet that presents case studies solving common troubles and concerns related to the molding and processing of rubber products. 【Table of Contents】 No.1 Planning and mass production of rubber products No.2 Rubber products compliant with the Food Sanitation Act No.3 Long products exceeding 1 meter No.4 Scorching of rubber materials No.5 Molding of two-color rubber materials No.6 Changes in molding methods through mold modification No.7 Alternative production of large rubber products No.8 Utilization of recycled rubber No.9 Molding of pure white rubber No.10 Resolution of burr residue *For more details, please download the materials or feel free to contact us. *Please download Part 1 from the link below.

• Contract manufacturing
• Processing Contract
• Rubber

A comprehensive showcase of trouble and problem-solving cases that arise in the molding and processing of rubber products! Introducing 10 cases, including the cleanliness of product surfaces and precision large-diameter gaskets.

For those struggling with the molding and processing of rubber products! We offer a booklet that presents case studies solving common troubles and concerns related to the molding and processing of rubber products. 【Table of Contents】 No.1 Elimination of bleed (oiliness) No.2 Rubber products with a beautiful surface No.3 Elimination of weld lines No.4 Integrated molding of rubber and metal No.5 Precision large-diameter packing No.6 High-design rubber products No.7 Painting on rubber products No.8 Switching from different materials to rubber No.9 Small-scale production of rubber products No.10 Assembly of rubber products *For more details, please download the materials or feel free to contact us.

• Contract manufacturing
• Processing Contract
• Rubber

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.