We will be exhibiting at "Nagoya Robodex."

[Factory/Warehouse] Correcting the tilt of concrete floors and voids beneath the floor caused by ground subsidence in as little as one day without stopping operations! Patented unique method!

■The cargo in the warehouse is not stacked straight. ■There are uneven surfaces that hinder the movement of forklifts. ■The equipment, such as racks, is tilted. ■Abnormal operation is observed in the automatic racks. ■The transport robot has stopped. ■The level of the machinery cannot be secured. The patented unique method called [Upcon Method] uses polyurethane resin to resolve issues caused by floor tilting, unevenness, and sagging due to earthquakes or ground subsidence, as well as voids formed under the floor, with corrections possible in as little as one day. [What is the Upcon Method?] By injecting polyurethane resin into existing concrete floors that have subsided, it compresses and strengthens the ground with pressure that expands in a short time while pushing up the concrete floor for correction. Since it corrects without demolishing the existing concrete floor, it significantly reduces construction time. The polyurethane can lift the floor with an expansion pressure of up to 10 tons per square meter, eliminating the need to move heavy equipment or products. Therefore, corrections can be made without stopping the operations of factories or warehouses. ▼We will exhibit at the [International Logistics Comprehensive Exhibition 2024]. Date: September 10 (Tuesday) to 13 (Friday), 2024 Venue: Tokyo Big Sight, East Exhibition Hall Booth Number: 7-808

• Calibration and repair

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.