Japan Machinery News, October 5, 2024 Issue, Notice of Advertisement and Article Publication

You can easily tell if the liquid in the drum is full or empty with just one touch!

"Sensor-type Liquid Level Gauge for 200L Drums" GDB-CF / For Full GDB-CL / For Empty (For low-viscosity oil, kerosene, diesel, wastewater, and waste liquids) *Not suitable for solvents or chemicals that can damage materials. "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside, using each product. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids include low-viscosity oil, kerosene, diesel, water, wastewater, and waste liquids. *Not suitable for solvents or chemicals that can damage materials. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug of the drum (G3/4). ● Confirmation work can be done within 3 minutes from startup (automatic stop after 3 minutes). ● The full and empty indicators light up in red and alert with a 15-second buzzer. ● Uses four AA batteries (approximately 1,000 uses). ● This product is for indoor use only. *Do not use outdoors.

• Other pumps

Battery-operated sensor auto-stop nozzle with auto-stop function even when self-weight falls.

"Battery-Powered Sensor Auto Stop Nozzle Series" ATNB-20 (for light oil, kerosene, and medium viscosity oil) ◎ Adopts a battery-powered auto stop function, allowing for transfer even without a pump body. This nozzle has a built-in sensor that automatically stops in response to liquid. It can be used approximately 200 times with three AA lithium batteries. *Please pay attention to the usage pressure and flow rate range.

• nozzle

Industry first! Medium viscosity oil can also be auto-stopped!

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20GATNB (for diesel, kerosene, and medium viscosity oil) <Description of the main unit> - Ideal for refueling and dispensing operations of kerosene, diesel, and medium viscosity oil. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, contributing to cost reduction and environmental improvement by eliminating oil stains and odors. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

• nozzle

Auto-stop gun nozzle specification compatible with medium viscosity oil!

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20ATNB (for diesel and kerosene) <Main Description> - Ideal for refueling and dispensing operations of kerosene and diesel. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, helping to eliminate oil stains and odors, thereby contributing to cost reduction and environmental improvement. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

• nozzle

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."