[Notice] Regarding the price revision of Air Scoops

Instantly crush soil and sand with high-speed air! It is possible to excavate soil and sand without damaging the target object!

The Air Schop is a device that uses a special nozzle to spray compressed air for excavating (loosening) hardened soil and debris. It can spray air at high speed from the tip, instantly crushing the soil without damaging the target object, allowing for excavation of the debris. 【For the safety of the operator (soil and debris may scatter during operation.)】 ■ When operating, please be sure to wear earplugs and goggles, as well as protective gear for your body. * For facial protection, please wear thick canvas or leather gloves, an apron, or equivalent gear to protect against scattering. ■ You must have basic knowledge of the safe use of air compressors. ■ When connecting compressed air, never point the Air Schop's exhaust nozzle at a person, look into it, or allow anyone to look into it. (This can cause injury.) ■ Proper use will have no impact on the environment. * For more details, please request materials or view the PDF data available for download.

• Power tools
• others

High-speed air transport system that does not require a vacuum tank, etc.

The powerful air conveyor, the ejector, is a suction device (pump) that operates as a high-speed air conveyor without the need for a vacuum tank or similar equipment. [Additional Explanation] ◆ The recommended type of ejector varies depending on the type and condition of the material being conveyed. When considering a purchase, please inform us of your requirements using the "Quotation Request Form" in the catalog to avoid any issues. ◆ Due to significant fluctuations in the prices of materials (such as stainless steel), please request a quote each time regarding pricing. ◆ The number following "JT" generally indicates the diameter of the suction side. (There may be slight discrepancies between the model number and actual size due to differences in size expressions such as inches.) ◆ As a guideline for selecting a model, it is advisable to choose one where the conveyed material is approximately half to one-third the diameter. ◆ The ejector is not well-suited for conveying highly viscous materials. ◆ While it is not adept at conveying materials that solidify upon gripping, it can handle such materials if they are mixed with more fluid substances. (Note: Materials with a shake-level viscosity can be conveyed, but mortar is not suitable as it solidifies inside and makes cleaning difficult.) The following basic information also includes explanations.

• Power tools
• Air Tools

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensors wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors wirelessly notify in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. For large parking lots, we recommend the "Floor Management Method" and "Block Management Method," which focus on cost reduction. Sensors are installed at regular intervals to count and manage the number of passing vehicles. This method offers the advantages of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 For smaller facilities, we recommend the "Parking Space Management Method," where sensors are installed in each parking space to display availability with high accuracy. By providing reliable occupancy information, this method helps reduce unnecessary entry of new vehicles and ensures safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.