We will be exhibiting at JIMTOF2024. We look forward to your visit!

Supports various membrane types with a small amount of samples. Achieves tests close to actual machines using a cross-flow method!

The "SEPA CF II" is a cross-flow flat membrane testing device that can conduct tests with a small amount of sample liquid. It comes with a variety of flat membranes and spacers, allowing for the testing of RO membranes, NF membranes, UF membranes, and MF membranes under various operating conditions from low to high pressure. With simple operation, it can obtain data useful for scale-up. It is available as a unit and can accommodate specification changes such as piping materials. 【Features】 ■ Contributes to simplifying work and reducing costs ■ Suitable for small starts due to lower initial costs ■ Immediate evaluation and experimentation possible with unit provision ■ Usable with flat membranes of 19cm x 14cm (effective membrane area of 140cm²) ■ Active in research and development departments for chemicals, food, pharmaceuticals, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Coating thickness gauge

Attention those struggling with high-pressure pumps! Solve pump issues in membrane separation treatment of seawater, wastewater, solvents, chemicals, etc., with diaphragm seal-less characteristics.

The HydraCell pump, with over 40 years of proven performance in the water treatment industry, is widely adopted by major domestic water treatment manufacturers for RO and UF systems. In the United States, where the manufacturer is located, it is also used in RO systems for submarine life support, achieving one of the greatest successes in this application. Thanks to its seal-less design, it can continuously and stably pump various liquids, including seawater, industrial wastewater, organic solvents, and chemicals, at high pressure without issues. The low pulsation achieved through three or five-piston configurations also helps reduce the burden on membranes. We are currently offering a free booklet that explains the benefits of using the HydraCell pump! **Benefits of the HydraCell Pump:** 1. A wide range of lineup options, accommodating everything from small flat membrane RO test units to 8-inch systems! 2. Choice of wetted materials including SUS316L, duplex stainless steel, Hastelloy C, and ceramic! 3. Accurate flow control while maintaining constant pressure! 4. The seal-less design eliminates concerns about liquid leakage due to corrosion of mechanical seals, allowing for 100% containment of liquids! 5. Capable of dry running! *For more information, please check our catalog and videos. Feel free to contact us with any inquiries.*

• Positive Displacement Pump
• Special Pump
• Water treatment equipment

We would like to introduce our products specialized in water treatment among our offerings! We are also providing a "Functional Membrane Selection Guide" to assist in selecting functional membranes!

We would like to introduce the water treatment-related products handled by Sanko Co., Ltd. Since importing functional membranes from the United States in 1969, we have imported and sold numerous types of membranes from various manufacturers over many years. Based on this experience, we now provide products and services to a wide range of industries, including medical, pharmaceuticals, food, beverages, chemicals, and industrial wastewater. 【Product Lineup】 ■ Functional Membranes ■ Vessels ■ Testing Equipment ■ E-Cell * For more details, please refer to the PDF materials or feel free to contact us. * We are also offering a "Functional Membrane Selection Guide"!

• Other water treatment equipment

Achieve energy savings with high pump efficiency! A diaphragm pump with over 400 sales records in the oil and gas industry for jet pumps and long-distance, high-lift transportation!

The HydraCell "T100 Series (Low)" is a three-diaphragm pump designed for high flow and high pressure. It can operate with the suction piping closed or clogged, allowing for continuous dry running without damage, thereby reducing downtime and maintenance costs. Thanks to its special diaphragm shape, it can handle abrasive liquids that cannot be managed by gear, screw, or plunger pumps. 【Features】 ■ Maximum flow rate: 366.1 l/min ■ Maximum pressure: 14.5 MPa ■ Reduces maintenance costs such as seal and packing replacements ■ Supports operation under low NPSH conditions and negative pressure in the suction (no feed pressure required) ■ Capable of handling abrasive liquids ■ Achieves energy savings with higher pump efficiency compared to centrifugal pumps *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

A pressure vessel capable of accommodating a wide range of applications!

The "ROPV FRP Vessel" is a pressure vessel manufactured by ROPV, a company with one of the largest scales in China and a complete quality management system. It has a wide range of sizes and pressure resistance, making it suitable for many applications, and the side port design reduces installation space and costs. Additionally, it features a highly economical, robust, and easy-to-assemble structure. Compared to other overseas products, it can be manufactured and delivered in a relatively short period of time. Please feel free to contact us. 【Features】 ■ Manufactured by ROPV ■ Compatible with many applications ■ Achieves reduction in installation costs *For more details, please contact us or download the catalog.

• Stainless steel utensils and containers
• Other laboratory equipment and containers

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.

Notice of participation in the "IT Trend EXPO 2026 Spring" (the largest online exhibition in Japan) from March 3 (Tue) to March 7 (Sat). ◆ IT Trend EXPO 2026 Spring Event Overview ◆ Name: IT Trend EXPO 2026 Spring Theme: New encounters will change tomorrow's "work" Date: March 3 (Tue) - 7 (Sat), 2026 Location: Online Participation Fee: Free Registration: Please apply from the URL below Meiden VR Safety Experience Education: https://it.expo.it-trend.jp/key/xpgi2xce Safety Information Portal: https://it.expo.it-trend.jp/key/3r6vr3bw

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

The insulating oil of old electrical equipment that has been in use for over 30 years may be contaminated with PCBs. Proper disposal is required by the disposal deadline. If you are using a vacuum tube oscillator, please check! - Transformers - Capacitors - Rectifiers, etc. Please consider updating any relevant equipment such as oscillators and hardening equipment as soon as possible. *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 ★ For inquiries by email, please contact: info@fujidenshi.co.jp *When calling or emailing, please mention "I saw it on Ipros." Response hours: Monday to Friday, 9 AM to 5 PM.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.