Released the bolt anti-rotation washer "Tsure Zero Washer."

Washer for completely preventing the simultaneous rotation of bolts, suitable for M12 to M72.

■ Completely prevents bolt rotation with the "Anti-Rotation Zero Friction Washer" Bolt sizes: Compatible with M12 to M72. International patent applied for. ■ Features of the Plarad Anti-Rotation Zero Friction Washer Prevents rotation of hex bolts. ■ Unlike washers that utilize the friction resistance of surface irregularities from knurled processing, the Zero Rotation Washer has a special structure that changes the equivalent friction diameter, ensuring that the bolt does not rotate. ■ By simply replacing standard flat washers, there is no need for cumbersome bolt anti-rotation tools or backup wrench tools, significantly reducing the time required for bolt tightening operations. Additionally, the bolt tightening task, which previously required two workers to hold the tightening tool and the anti-rotation tool, can now be done by one person, improving labor efficiency. - Strength classification: 8.8 - Material: S45C - Surface treatment: Trivalent chromate finish <For inquiries about the bolt anti-rotation zero friction washer> Please contact us for quotes or material requests. Plarad Co., Ltd. TEL: 078-967-3556

• nut
• bolt
• Assembly Jig

A nut that does not loosen even after 1 million vibration tests (3D vertical and horizontal)! Compatible bolt sizes: M14 to M100.

■ Structure and Non-Loosening Principle of the Strongest Lock Nut "Bolrock Nut" 1. When the nut is subjected to vibration and attempts to loosen counterclockwise, the fine internal balls utilize a clutch mechanism to exhibit a wedging effect, preventing the nut from turning and loosening. 2. The slope angle of the internal balls is designed to be larger than the "screw lead angle," which is the angle at which the screw rises one full turn. 3. When the nut is tightened, the internal balls automatically move to the deepest part of the groove, aligning the bottom of the nut with the top of the balls, eliminating any gap between them and the floor, thus not affecting the tightening axial force. ■ Vibration Test Condition Data - Bolt Diameter: M16 - Bolt and Nut Material: SCM435 - Frequency: 100Hz - Number of Vibrations: 1,000,000 times - Simultaneous 3D vibration in both vertical and horizontal directions While competitor lock nuts loosen after 1,100 to 2,300 vibrations, the Plarad Bolrock Nut withstands 1,000,000 vibrations, proving its overwhelming vibration resistance. <About the Strongest Lock Nut: Bolrock Nut> For inquiries such as requests for quotes or materials, please contact us. (Company) Nippon Plarad TEL: 078-967-3556

• nut
• bolt
• Other work tools

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.