★Introduction of the easy-to-use general-purpose type of "Piezo Film Sensor" that can detect breathing, heartbeats, and vibrations with convenient lead wires★

Flexible with a soft film piezoelectric material! General-purpose piezo film sensor with lead wires.

The "TP series" is a flexible piezo film sensor made of flexible film piezoelectric material. It is a general-purpose type with a single-layer structure and lead wires. It is suitable for monitoring biological signals such as body movements, as well as monitoring vibrations, impacts, and dynamic strains. Additionally, it uses piezo film (PVDF) as the piezoelectric element, which generates voltage in response to small changes such as compression and elongation (strain). 【Features】 ■ Compliant with RoHS directive ■ Single-layer structure ■ Flexible with flexible film piezoelectric material ■ General-purpose type with lead wires *For more details, please refer to the PDF materials or feel free to contact us.

• Piezoelectric Devices
• Sensors
• Other polymer materials

It is a flexible structure with a soft film piezoelectric material!

The "LP series" is a piezo film sensor that can accommodate large areas, which is difficult with ceramics, and has a wide detection area. Our company has successfully commercialized piezo film sensors into products such as "hydrophones," "ultrasonic probes," "accelerometers," "acoustic pickups," and "pressure sensors." One of our strengths is the expertise gained from years of handling piezo film, allowing us to excel in circuit design and sensorization for complex shapes. Our piezo film sensors have a solid track record and are used in a variety of fields, including medical device manufacturers, construction machinery, and automotive manufacturers. They are suitable for monitoring dynamic loads such as body movement and other biological signals, as well as vibrations, impacts, and dynamic strain. 【Features】 ■ Shielded structure ■ Flexible with a flexible film piezoelectric material ■ Wide detection area ■ Uses piezo film (PVDF) for the piezoelectric element ■ Capable of handling large areas that are difficult with ceramics *For more details, please refer to the PDF document or feel free to contact us.

• Piezoelectric Devices
• Sensors
• Other polymer materials

A type of piezo film sensor designed for simple use in research applications and similar purposes.

The "MP series" is a very small product among piezo film sensors. It is suitable for monitoring biological signals such as body movements, as well as for monitoring vibrations, impacts, dynamic strains, and dynamic loads. 【Features】 ■ Shielded structure ■ Designed for easy use in research applications ■ Extremely small size ■ Uses piezo film (PVDF) as the piezoelectric element *For more details, please refer to the PDF materials or feel free to contact us.

• Piezoelectric Devices
• Sensors
• Other polymer materials

High sensitivity with low noise! Flexible structure with shielded design and flexible film piezoelectric material.

The "SP series" is a low-noise, high-sensitivity piezo film sensor. It generates voltage in response to minute changes such as compression and elongation (strain). It is suitable for monitoring biological signals such as body movements, as well as for monitoring vibrations, impacts, dynamic strain, and dynamic loads. 【Features】 ■ Shielded structure ■ Flexible with a flexible film piezoelectric material ■ Low noise and high sensitivity ■ Uses piezo film (PVDF) as the piezoelectric element ■ Laminated with adhesive PET film of 125μm on one side ■ The electrode part without lamination is coated with a thin coating material, excluding the terminal part *For more details, please refer to the PDF document or feel free to contact us.

• Piezoelectric Devices
• Sensors
• Other measurement, recording and measuring instruments

Features: ● Equipped with ARM MediaTek Genio 700 / 510 ● Onboard LPDDR4 8GB ● HDMI 2.0 x 1, DP 1.4 x 1 ● eDP 2 lanes x 1, MIPI-DSI 4 lanes x 1 ● GbE x 1 ● USB 3.0 + 2.0 x 1, USB 2.0 x 5 ● UART x 4, GPIO x 12, MIPI CSI x 2, TPM 2.0 ● Fan-equipped heatsink, heatsink available separately ● Carrier board available separately

Features: ● Equipped with Intel Core Ultra 5 125H/7 155H ● LPDDR5 16GB onboard memory ● NVMe 128GB onboard storage ● eDP x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen2 x 2 ● PCIe 4.0[x1] x 4 ● 2.5GbE x 1 ● COMe Type10 standard, size 84mm x 55mm ● Optional items ECB-920A-0001: Development carrier board NANOCOM-MTU-FAN: CPU fan NANOCOM-MTU-HSP: Heat spreader (Note: Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 9 185H / 7 155H / 5 125H processors ● DDR5 5600MHz Dual Channel SODIMM x2 (up to 96GB) (sold separately) ● VGA switch DDI x1, LVDS colay eDP x1, DDI x2 ● USB 2.0 x8, USB 3.2 Gen 2 x4 ● PCIe [x1] x4, PCIe [x4] x1, PEG [x8] + [x4] + [x4] ● 2.5GbE x1 ● DC 9~16V input ● COM Express Type 6, 3.75 inches x 3.75 inches (95mm x 95mm)

By digitizing contract operations, you can reduce many costs, including stamp duty and mailing fees. ◆ Four Benefits of Electronic Contracts - Cost reduction for printing, stamp duty, mailing fees, and original document storage - Improved business efficiency through system-based sending and stamping - Prevention of tampering with timestamps - Enhanced document searchability 【Many Benefits for the Other Party as Well!】 - Both parties can confirm that the document has not been tampered with - No worry about losing the original paper documents - Increased operational efficiency due to the absence of mailing and binding hassles - Quick contract conclusion through email or system verification ◆ Disadvantages of Electronic Contracts - Costs for implementing and operating the service - Need to ensure that business partners understand electronic transactions ----------------------------------------------------- 　　Consult with paperlogic for electronic contract services! -----------------------------------------------------

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.