■Notice of the "2025 Attack Fair in Meiko"!■ 【July 23, 2025 (Wednesday) - July 24, 2025 (Thursday)】

On-site drilling work has entered the era of cordless! A magnetic application drilling machine equipped with a powerful 36V battery.

The "Atlaace CLO-2725/CLO-2725(NN)" is a cordless portable magnetic drilling machine compatible with jet broaches of 20L and 25L, accommodating diameters from φ11.5 to φ27mm. It features a high-efficiency brushless motor, enabling speedy drilling. It can drill approximately 60 holes with a thickness of 6mm and a hole diameter of 18mm. Additionally, it is equipped with an LED light that is useful in narrow or dimly lit work environments, making it suitable for drilling in dark or confined spaces. 【Features】 ■ Powerful 36V 2.5Ah battery ■ Total height of 150mm fits H-shaped steel of 200mm ■ Convenient LED light for drilling ■ Equipped with safety features *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other work tools

A compact cordless belt sander weighing approximately 1.4 kg that can be operated with one hand! Ideal for job sites where power supply is unavailable!

The "Belton CLB-10" is a compact and lightweight cordless rechargeable belt sander. It features an 18V battery for powerful grinding and is compatible with a large capacity 5.0Ah battery. The belt rotation speed can be adjusted in six stages. Additionally, it is equipped with the first-ever belt rotation direction switching function in the cordless series, allowing for changes in the direction of chip dispersion. The pressure adjustment alarm function causes the LED to blink in an overload state, preventing excessive sanding. 【Features】 ■ Lightweight at 1.4kg (including battery) ■ Six-stage rotation speed switching function ■ Belt rotation direction switching function ■ Overload detection function *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

Choose cordless for chamfering! A powerful rechargeable chamfering machine capable of chamfering 25m on a full charge.

The "Mini Beveller CLMB-0202" is a rechargeable linear beveling machine. The "Circuit Beveller CLCB-0202" is a rechargeable curved beveling machine. Both are equipped with powerful batteries that fully charge in 25 minutes and can perform 25 meters of beveling on a full charge. 【Chip Lineup】 1. C Face Chip 2. R2 Face Chip 3. R3 Face Chip (for CLCB-0202 only) These machines are not only suitable for C face beveling work, which cannot be separated from can manufacturing and steel processing, but are also recommended for R face beveling work in the shipbuilding and bridge industries. *For more details, please refer to the PDF materials or feel free to contact us.

• Power tools

Lightweight, high-speed rotation, energy-saving! Automation-compatible for unmanned deburring and polishing! *Video available

We would like to introduce our series of air tools compatible with automatic machines. Starting with the 20mm wide belt "Belton," which is ideal for deburring curved parts, we also offer the "Airsonic," which achieves high-speed rotation through our unique air motor, and the "Orbital Sander," which uses a double-action method to leave no polishing marks. All products are made to order. Please contact us when placing an order. 【Product Lineup】 ■ Pneumatic Belt Sander "Belton" ■ Pneumatic Die Grinder "Airsonic" ■ Dual Action Air Sander "Orbital Sander" ■ Pneumatic High-Speed Multi-Chisel "Jet Chisel" *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

One machine can perform 15 types of angle processing! Reducing the work time for formwork creation to one-fourth of the conventional time.

This is a hydraulic angle processing machine. It allows for a series of smooth processing of angle materials and more with five work positions: cutting, V-notching, bending, punching, and connecting. Please refer to the video below for actual work methods. [Processing Examples] - Angle cut - V-notch - Bending - Punching - Pipe notch and more. *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

One driver allows for 30 different torque settings! Two screw tightening modes can be selected, achieving "quality improvement at low speed" and "efficiency at high speed"!

The "Brushless Delvo C Series DLV45C" is an electric driver of the current control type that allows for 30 different torque settings with a single unit. It comes in two types: the lever type "DLV45C12L" and the push type "DLV45C12P." It features a built-in three-stage automatic speed variable function, achieving "quality improvement at low speeds" and "efficiency at high speeds." Additionally, when entering channel setting mode, you can set the ON/OFF for password input, preventing unintended setting changes. 【Features】 ■ Torque current control type ■ Low voltage brushless motor ■ ESD protection (anti-static performance) ■ Handheld/external start (compatible with automatic machines) ■ Nine levels of rotation speed adjustment *For more details, please refer to the PDF document or feel free to contact us.

• driver

For high torque tightening of 2.0 to 7.0 N·m! One unit allows for 30 different torque settings and tightening condition configurations, contributing to improved work efficiency.

The "Brushless Delvo C Series DLV70C" is a current-controlled electric driver that allows for a maximum of 30 torque settings with just one unit. The high-torque model of the conventional product "DLV45C" has now been newly introduced! It features two types of screw tightening modes (SOFT tightening and HARD tightening), enabling suitable screw fastening for the workpiece. With 9 levels of rotational speed adjustment and a 3-stage automatic speed variation function, it achieves improved screw fastening quality and increased work efficiency! Additionally, two safety features, a warning mode and a tightening prohibition time setting, help prevent human errors. 【Features】 ■ Torque current control type ■ Equipped with low-voltage brushless motor ■ ESD protection (anti-static performance) ■ Handheld/external start (compatible with automatic machines) ■ Two measurement methods (time/motor rotation signal) *For more details, please refer to the PDF document or feel free to contact us.

• driver

Piping around the molding machine! Compatible with narrow pitches, allowing for the replacement of only the lens part, contributing to cost reduction.

The "FMC-25-1F/FMC-25-2F" is a lens exchange type flow monitor. A new small diameter version of the conventional model "FMC-30-3F/FMC-30-4F" has been introduced! It supports even lower flow rates (0.6–6L/min) than the previous flow monitors. The rotation of the two colored blades allows for visual confirmation of fluid flow, making it easier to see the flow at low rates. It can also be installed in narrow pitches due to the miniaturization of the mold. Like the previous models, the monitor lens (common for 1/8 and 1/4 sizes) can be replaced while still piped. Additionally, we also offer the flow meter "FM-03-B" with a valve that stabilizes cooling water flow and reproduces specified flow rates. 【Features】 ■ Visual confirmation of fluid flow with the rotation of two colored blades from a low flow rate (0.6L/min) ■ Monitor lens (common for 1/8 and 1/4 sizes) can be replaced while still piped ■ Prevents unintended detachment of resin parts with a stopper ■ The threaded part on one side can rotate freely left and right, making installation and replacement of the main unit easy *For more details, please refer to the PDF document or feel free to contact us.

• Other molds

Built-in vacuum pump eliminates the need for compressed air! Contributes to reducing power consumption in suction transport.

The electric suction hand "e-VEE" is an end effector for robots that is useful for suction transport. Since it has a built-in vacuum pump, there is no need for compressed air supply, allowing it to be used anywhere. By suppressing the discharge pressure and flow rate of the compressor, it contributes to power reduction. 【Features】 ■ Energy-saving (the pump automatically stops due to the pressure sensor) ■ Quiet (no air discharge noise) ■ Clean (no external air inflow) ■ Easy connection (no need for hose routing) There are various other features as well. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

A sliding door closer that opens easily with a small force and closes quietly and securely at your preferred speed!

A door closer is a product that enables doors to close quietly and safely. It is used in various doors around the world, including in medical institutions, offices, and transportation equipment. It automatically closes the door using the action of springs or hydraulics, eliminating the need for an arm and achieving a sleek door design. This catalog features the high-performance sliding door closer "Sliding Closer," which excels in quiet and smooth opening and closing, as well as ease of installation. 【Features】 - Can close the door lightly with minimal force - Compact, lightweight, and long-lasting - Equipped with reinforced resin rollers and aluminum rails for very quiet operation - Easy and quick to install *For more details, please refer to the PDF materials or feel free to contact us.

• others

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room NO.12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities planned. We look forward to welcoming everyone!

[Exhibition Display] Demonstration of pineapple adhesion dynamics using collaborative robots Dynamic display using collaborative robots and tool changers for gripping Static display of a 5kg dual-sided gripper Comparison of ejector compressed air consumption Various suction pads Foam gripper, etc. We recommend visiting on the first or second day when you can view the exhibits with relative ease. *The third day (Friday) is expected to be very crowded. 【Gripper Sale Event】 We will be selling the following two products at a discounted price at the exhibition booth. Please inquire about the special prices at the venue. ■ 'KENOS Gripper KVGL.400.100, N214.FR6.S2' URL: https://www.youtube.com/watch?v=HsNRwrDtjW0 ■ 'Collaborative Robot Hand KCS.Q110.N301.110.FR6.SX422.V1.X.X' URL: https://www.youtube.com/watch?v=GFKg3blZzdQ These products are ideal not only for actual applications but also for use as test machines. How about taking this opportunity?

[Speaker] Innovation Analyst Andy Kondo [Key Lecture Content] *The latest content will be added as appropriate based on on-site research at CES. The following may change depending on the event status.* CES has now become "the world's largest mobility exhibition," comparable to an auto show. The focus for 2026 will be on the social implementation of autonomous driving, the rise of Software-Defined Vehicles (SDV), the proliferation of AI-equipped vehicles, and the rapid growth of Chinese OEMs, all of which are converging to rewrite the industrial structure. In this lecture, from the perspective of an analyst who has been on-site for over 10 years, we will interpret where the global mobility industry is headed based on the "real scene of CES 2026." Furthermore, we will discuss how these changes will impact and create opportunities in the Japanese market, which is finally beginning to embrace electrification, while aligning with the latest international trends.

[Speaker] Representative of Infonavi Instructor at Business Breakthrough University, Ms. Yoshie Ueno [Lecture Topics] 1. What is a document? - The role of "documents" 2. The success or failure of document creation lies at the entrance - There are procedures for information research - Planning the research 3. Thinking about document creation with a framework - Preventing omissions and eliminating waste - Examples of framework utilization 4. Considering from information sources - There are different types of information - Main information sources for business research 5. How to read and assess documents - Criteria for evaluating information 6. How to create effective documents - Enhancing persuasiveness and trustworthiness 7. Q&A / Business card exchange