Released the ultra-small spout pouch "AS8.7 Spout Series".

Ultra-small spout pouch with a diameter of Φ8.7.

Spout series for small spout pouches. For ultra-small spout pouches with a capacity of 30ml to 50ml, such as serums and cosmetics. With a highly designed dedicated cap, it allows for a different proposal compared to regular spout pouches. Small spout pouches are suitable for hanging displays that can be suspended from fixtures in convenience stores and drugstores.

• Packaging Bags

Ideal small and thin spout pouch for post-in. Hinge cap is also available as an option.

We recommend the soft packaging container "spout pouch" that can reduce plastic usage towards a decarbonized and circular society. There are requirements for post-in cases (shipping cases designed to fit into mailboxes used for mail delivery, such as in online shopping) such as a thickness of 30mm, but the AS10 spout series caps and hinge caps meet these requirements with a thickness of approximately 20mm. The hinge cap for small spouts is available in three nozzle diameters: Φ8mm, Φ3mm, and Φ1mm, and it also offers a discharge adjustment valve that allows for the adjustment of discharge volume based on the pressure applied to the pouch.

• Other consumables

Switching from plastic bottles to spout pouches for resource conservation! Multi-functional caps for refillable containers and interchangeable soft packaging containers.

We recommend the soft packaging container "spout pouch" that can reduce plastic usage towards a decarbonized and circular society. It is a pouch container with a 16mm spout welded to a film pouch, allowing for re-capping. It can be used for various applications, including food-related products, daily necessities, cosmetics, and industrial goods. We offer various caps for different purposes, including the standard "screw cap (with tamper-proof feature)," the convenient "hinge cap with selectable nozzle diameter," and the "functional hinge cap" that expands usability. *The spout pouch container has the following environmental advantages compared to bottles and plastic containers: - It is thin and space-saving. - It is lightweight and does not take up much space during transport. - It can be reduced in volume upon disposal, thereby decreasing waste. Additionally, our AS16 spout series can be molded using "plant-based materials," which allows for more environmentally friendly options.

• detergent

Spout for spout pouches compatible with a 3.0ml dispenser pump with a diameter of Φ26.5mm.

A revolution for spout pouches. This is a spout specifically designed to encourage the switch from bottles to spout pouches, allowing connection to a 3.0ml pump. It enables the use of pouch containers, which have been widely used as "refill products," as "packaging containers themselves." This eliminates the hassle of refilling bottles and contributes to reducing environmental impact.

• detergent
• Disinfectant
• Other packaging materials

Ideal for floating storage! Spout compatible with spray and dispenser pumps.

The pouch containers that have been widely used as "refill products" can be transformed into "packaging containers themselves" by switching to spout pouches using the AS18 spout. By directly attaching a spray nozzle to the spouted pouch container, the hassle of transferring to a bottle is eliminated, which also contributes to reducing environmental impact.

• Cleaning agents
• detergent
• Disinfectant

Variable Area Flowmeters Reliable quality designed to world standards When measuring the flow of high-pressure or high-temperature liquids and gases that are not suitable for plastic, our robust "glass tube variable area flowmeter (rotameter)" allows for more accurate flow measurement. It offers a wider flow range and is suitable for various liquids and gases! Contents ■ Glass tube variable area flowmeters / Metal tube variable area flowmeter lineup ■ Custom design solutions ■ Accessories & replacement parts ■ Support for technical documentation and compliance with various regulatory requirements ■ Services and support, etc.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!