Japan Machinery News, December 5, 2024 Issue, Notice of Advertisements and Articles Published

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on an LCD panel. With the wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

"JIS Standard 200L Drum, Resin Drum, IBC Container (Tank) Compatible Laser Liquid Level Gauge Standard/Wireless/Parent Unit/Repeater (GDE-CL/GDE-CLW/GDE-W/GDE-R)" GDE-CL / Standard Type, No Wireless, Battery Operated GDE-CLW / Wireless Type, AC100V GDE-W / Wireless Type Dedicated Parent Unit, AC100V GDE-R / Wireless Type Dedicated Repeater, AC100V (Oil, Kerosene, Diesel) *Solvents and chemicals are not compatible due to laser sensing considerations "Features" ● Measurement in various containers such as drums (display in %, L, mm) Can also be used for other containers if the maximum liquid height is set (display in % and mm / L display not available) * % indicates the remaining liquid ratio from the total, L (liters) indicates the remaining liquid volume, mm indicates the remaining height from the bottom layer relative to the total liquid * Small plug (G3/4) can be attached to the drum ● Select units from "%, L, mm" and display on the LCD panel (JIS Standard 200L Drum) ● Set the height at which a sound will be emitted during "%" measurement ● Sends liquid volume data to the USB-connected parent unit every 30 seconds ● Can manage up to 15 units in real-time within a dedicated PC application ※Please note that this is available for sale in Japan only.

• Liquid level control/level switch

A heater that warms up drums and other containers to reduce the viscosity of liquids.

"HTJ Series" HTJ-A-P (for pails and one-gallon cans) HTJ-B-50D (for 50L drums) HTJ-C-100D (for 100L drums) HTJ-C-200D (for 200L drums) HTJ-HHD (for 200L drums) HTJ-HP2D (for 200L drums) HTJ-IBC1-40 (for IBC containers) HTJ-IBC2-90 (for IBC containers) ◎ Selectable by container type "Benefits" ● Completely covers the container, making it less likely to cool down ● Foldable, requiring less space for storage "Features" ● Compatible with 6 types of containers, temperature adjustment via dial ● Three types of outer covering material, simply wrap around the container and secure with a band <Common Specifications> Power Supply (V): 100 <Usable Liquids> - Oil - Water-based paint - Triethanolamine * Not suitable for flammable liquids. * The product shown in the video is from the time of filming. The design and specifications may differ at the current time or during the sales period. Thank you for your understanding.

• Other heaters

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be performed without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in narrow spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluids *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, and reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• Filtration Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."